The Linux Kernel, the operating system core itself.

Security Fix(es):

In the Linux kernel, the following vulnerability has been resolved:

fs/ntfs3: reject index allocation if $BITMAP is empty but blocks exist

Index allocation requires at least one bit in the $BITMAP attribute to track usage of index entries. If the bitmap is empty while index blocks are already present, this reflects on-disk corruption.

syzbot triggered this condition using a malformed NTFS image. During a rename() operation involving a long filename (which spans multiple index entries), the empty bitmap allowed the name to be added without valid tracking. Subsequent deletion of the original entry failed with -ENOENT, due to unexpected index state.

Reject such cases by verifying that the bitmap is not empty when index blocks exist.(CVE-2025-40067)

In the Linux kernel, the following vulnerability has been resolved:

batman-adv: fix fragment reassembly length accounting

batman-adv keeps a running payload length for queued fragments and uses it to validate a fragment chain before reassembly.

That accounting currently allows the accumulated fragment length to be truncated during updates. As a result, malformed fragment chains can bypass the intended validation and drive reassembly with inconsistent length state, leading to a local denial of service.

Fix the accounting by storing the accumulated length in a length-typed field and rejecting update overflows before the existing validation logic runs.

The fix was verified against the original reproducer and against valid fragment reassembly paths.(CVE-2026-52914)

In the Linux kernel, the following vulnerability has been resolved:

ocfs2: fix listxattr handling when the buffer is full

[BUG] If an OCFS2 inode has both inline and block-based xattrs, listxattr() can return a size larger than the caller's buffer when the inline names consume that buffer exactly.

kernel BUG at mm/usercopy.c:102! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:usercopy_abort+0xb7/0xd0 mm/usercopy.c:102 Call Trace: __check_heap_object+0xe3/0x120 mm/slub.c:8243 check_heap_object mm/usercopy.c:196 [inline] __check_object_size mm/usercopy.c:250 [inline] __check_object_size+0x5c5/0x780 mm/usercopy.c:215 check_object_size include/linux/ucopysize.h:22 [inline] check_copy_size include/linux/ucopysize.h:59 [inline] copy_to_user include/linux/uaccess.h:219 [inline] listxattr+0xb0/0x170 fs/xattr.c:926 filename_listxattr fs/xattr.c:958 [inline] path_listxattrat+0x137/0x320 fs/xattr.c:988 __do_sys_listxattr fs/xattr.c:1001 [inline] __se_sys_listxattr fs/xattr.c:998 [inline] __x64_sys_listxattr+0x7f/0xd0 fs/xattr.c:998 ...

[CAUSE] Commit 936b8834366e ("ocfs2: Refactor xattr list and remove ocfs2_xattr_handler().") replaced the old per-handler list accounting with ocfs2_xattr_list_entry(), but it kept using size == 0 to detect probe mode.

That assumption stops being true once ocfs2_listxattr() finishes the inline-xattr pass. If the inline names fill the caller buffer exactly, the block-xattr pass runs with a non-NULL buffer and a remaining size of zero. ocfs2_xattr_list_entry() then skips the bounds check, keeps counting block names, and returns a positive size larger than the supplied buffer.

[FIX] Detect probe mode by testing whether the destination buffer pointer is NULL instead of whether the remaining size is zero.

That restores the pre-refactor behavior and matches the OCFS2 getxattr helpers. Once the remaining buffer reaches zero while more names are left, the block-xattr pass now returns -ERANGE instead of reporting a size larger than the allocated list buffer.(CVE-2026-53041)

In the Linux kernel, the following vulnerability has been resolved:

drm/amd/display: Use krealloc_array() in dal_vector_reserve()

[Why & How] dal_vector_reserve() computes the allocation size as "capacity * vector->struct_size" using uint32_t arithmetic, which can silently wrap to a small value on overflow. This would cause krealloc to return a smaller buffer than expected, leading to heap overflows on subsequent vector appends.

Replace krealloc() with krealloc_array() which performs an internal overflow check and returns NULL on wrap, preventing the issue.

(cherry picked from commit 37668568641ccc4cc1dbca4923d0a16609dd5707)(CVE-2026-53329)

In the Linux kernel, the following vulnerability has been resolved:

exfat: fix potential use-after-free in exfat_find_dir_entry()

In exfat_find_dir_entry(), the buffer_head obtained from exfat_get_dentry() is released with brelse(bh) before the fall-through TYPE_EXTEND branch reads the directory entry through ep (which points into bh->b_data):

brelse(bh);
if (entry_type == TYPE_EXTEND) {
	...
	len = exfat_extract_uni_name(ep, entry_uniname);
	...
}

After brelse() drops our reference, nothing guarantees that the underlying page backing bh->b_data remains valid for the subsequent exfat_extract_uni_name() read. This is the same pattern fixed in commit fc961522ddbd ("exfat: Fix potential use after free in exfat_load_upcase_table()").

Move brelse(bh) so it runs after ep is no longer dereferenced on each branch.

Confirmed on QEMU x86_64 with CONFIG_KASAN=y + CONFIG_DEBUG_PAGEALLOC=y

• CONFIG_PAGE_POISONING=y on linux-next, using a crafted exFAT image (long filename with same-hash collisions forcing the TYPE_EXTEND path). With a debug-only invalidate_bdev() inserted between brelse(bh) and the ep read to make the stale-deref window deterministic, the unpatched kernel faults:

  BUG: KASAN: use-after-free in exfat_find_dir_entry+0x133b/0x15a0 BUG: unable to handle page fault for address: ffff88801a5fa0c2 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI RIP: 0010:exfat_find_dir_entry+0x1188/0x15a0

With this patch applied, the same instrumented harness completes cleanly under the same sanitizer stack. I have not reproduced a crash on an uninstrumented kernel under ordinary reclaim; the instrumented A/B establishes the lifetime violation and that the patch closes it, not an unaided triggerability claim.(CVE-2026-63808)

In the Linux kernel, the following vulnerability has been resolved:

batman-adv: tp_meter: restrict number of unacked list entries

When the unacked_list is unbound, an attacker could send messages with small lengths and appropriated seqno + gaps to force the receiver to allocate more and more unacked_list entries. And the end either causing an out-of-memory situation or increase the management overhead for the (large) list that significant portions of CPU cycles are wasted in searching through the list.

When limiting the list to a specific number, it is important to still correctly add a new entry to the list. But if the list became larger than the limit, the last entry of the list (with the highest seqno) must be dropped to still allow the earlier seqnos to finish and therefore to continue the process. Otherwise, the process might get stuck with too high seqnos which are not handled by batadv_tp_ack_unordered().(CVE-2026-63834)

In the Linux kernel, the following vulnerability has been resolved:

batman-adv: v: prevent OGM aggregation on disabled hardif

When an interface gets disabled, the worker is correctly disabled by batadv_hardif_disable_interface() -> ... -> batadv_v_ogm_iface_disable(). In this process, the skb aggr_list is also freed.

But batadv_v_ogm_send_meshif() can still queue new skbs (via batadv_v_ogm_queue_on_if()) to the aggr_list. This will only stop after all cores can no longer find the RCU protected list of hard interfaces. These queued skbs will never be freed or consumed by batadv_v_ogm_aggr_work.

The batadv_v_ogm_iface_disable() function must block batadv_v_ogm_queue_on_if() to avoid leak of skbs.(CVE-2026-63835)

In the Linux kernel, the following vulnerability has been resolved:

iio: gyro: itg3200: fix i2c read into the wrong stack location

itg3200_read_all_channels() takes __be16 *buf' as a parameter and fills the i2c_msg destination as (char *)&buf'. Since buf' is the parameter (a pointer), &buf' is the address of the local pointer slot on the stack of itg3200_read_all_channels(), not the address of the caller's scan buffer. The (char *) cast hides the type mismatch.

i2c_transfer() therefore writes ITG3200_SCAN_ELEMENTS * sizeof(s16) = 8 bytes into the parameter's stack slot, which is discarded when the function returns. The caller's scan buffer in itg3200_trigger_handler() is never written to, so iio_push_to_buffers_with_timestamp() pushes uninitialised stack contents to userspace via /dev/iio:deviceX every scan -- both a functional bug (no actual gyroscope or temperature data is delivered through the triggered buffer) and an information leak.

The non-buffered read_raw() path is unaffected: it goes through itg3200_read_reg_s16() which uses `&out' on a local s16 value, where that is correct.

Drop the spurious `&' so the i2c read writes into the caller's buffer.(CVE-2026-63934)

In the Linux kernel, the following vulnerability has been resolved:

net: team: fix NULL pointer dereference in team_xmit during mode change

__team_change_mode() clears team->ops with memset() before restoring safe dummy handlers via team_adjust_ops(). A concurrent team_xmit() running under RCU on another CPU can read team->ops.transmit during this window and call a NULL function pointer, crashing the kernel.

The race requires a mode change (CAP_NET_ADMIN) concurrent with transmit on the team device.

BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: 0010 [#1] SMP KASAN NOPTI RIP: 0010:0x0 Call Trace: team_xmit (drivers/net/team/team_core.c:1853) dev_hard_start_xmit (net/core/dev.c:3904) __dev_queue_xmit (net/core/dev.c:4871) packet_sendmsg (net/packet/af_packet.c:3109) __sys_sendto (net/socket.c:2265)

The original code assumed that no ports means no traffic, so mode changes could freely memset()/memcpy() the ops. AF_PACKET with forced carrier breaks that assumption.

Prevent the race instead of making it safe: replace memset()/memcpy() with per-field updates that never touch transmit or receive. Those two handlers are managed solely by team_adjust_ops(), which already installs dummies when tx_en_port_count == 0 (always true during mode change since no ports are present). WRITE_ONCE/READ_ONCE prevent store/load tearing on the handler pointers.

synchronize_net() before exit_op() drains in-flight readers that may still reference old mode state from before port removal switched the handlers to dummies.(CVE-2026-64190)

In the Linux kernel, the following vulnerability has been resolved:

btrfs: reject free space cache with more entries than pages

When loading a v1 free space cache, __load_free_space_cache() takes num_entries and num_bitmaps straight from the on-disk btrfs_free_space_header. That header is stored in the tree_root under a key with type 0, which the tree-checker has no case for, so neither count is validated before the load trusts it.

The load loops num_entries times and maps the next page whenever the current one runs out, going through io_ctl_check_crc() -> io_ctl_map_page(), which does io_ctl->pages[io_ctl->index++]. But pages[] is allocated in io_ctl_init() from the cache inode's i_size, not from num_entries:

num_pages = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE);
io_ctl->pages = kcalloc(num_pages, sizeof(struct page *), GFP_NOFS);

So if num_entries claims more records than the pages can hold, io_ctl->index runs off the end of pages[]. The write side never hits this because io_ctl_add_entry() and io_ctl_add_bitmap() both stop once io_ctl->index >= io_ctl->num_pages; the read side just never had the same check.

To trigger it, take a clean cache (num_entries = <N> here), set num_entries in the header to 0x10000, and fix up the leaf checksum so it still passes the tree-checker. The cache inode has i_size = 65536, so num_pages is 16 and pages[] is a 16-pointer (kmalloc-128) array. The load now tries to read 65536 entries, io_ctl->index walks up to 16, and pages[16] is read past the array:

BUG: KASAN: slab-out-of-bounds in io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565) Read of size 8 at addr ffff88800c833a80 by task kworker/u8:3/58 io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565) __load_free_space_cache (fs/btrfs/free-space-cache.c:655 fs/btrfs/free-space-cache.c:820) load_free_space_cache (fs/btrfs/free-space-cache.c:1017) caching_thread (fs/btrfs/block-group.c:880) btrfs_work_helper (fs/btrfs/async-thread.c:312) process_one_work worker_thread kthread ret_from_fork

free-space-cache.c:420 is io_ctl_map_page(), inlined into io_ctl_check_crc() at line 565, which is why that is the frame KASAN names. The out-of-bounds slot is then treated as a struct page and handed to crc32c(), so the bad read turns into a GP fault.

Add the missing check to io_ctl_check_crc(), which is where both the entry loop and the bitmap loop end up. When num_entries is too large the load now fails like any corrupt cache: __load_free_space_cache() drops it and rebuilds the free space from the extent tree, so a valid cache is never rejected.(CVE-2026-64567)

In the Linux kernel, the following vulnerability has been resolved:

HID: wacom: stop hardware after post-start probe failures

wacom_parse_and_register() starts HID hardware before registering inputs and initializing pad LEDs/remotes. Those later steps can fail, but their error paths currently release Wacom resources without stopping the HID hardware.

Route post-hid_hw_start() failures through hid_hw_stop() before releasing driver resources.

This issue was identified during our ongoing static-analysis research while reviewing kernel code.(CVE-2026-68091)

In the Linux kernel, the following vulnerability has been resolved:

wifi: brcmfmac: make release_scratchbuffers idempotent

brcmf_pcie_release_scratchbuffers() frees the shared.scratch and shared.ringupd DMA buffers with dma_free_coherent() but does not clear the pointers afterwards, unlike the sibling release_ringbuffers() which NULLs commonrings/flowrings/idxbuf on release.

Both the bus_reset .reset callback (brcmf_pcie_reset) and brcmf_pcie_remove() call release_scratchbuffers. When reset teardown has run before removal, remove's own teardown would call dma_free_coherent() a second time on the already-freed DMA allocation.

NULL the pointers after free, matching release_ringbuffers(), so a later release observes that the allocation has already been released. This patch makes repeated sequential release safe; the reset-work lifetime is handled separately by the following patch.

This issue was found by an in-house static analysis tool.(CVE-2026-68192)

In the Linux kernel, the following vulnerability has been resolved:

drm/amdgpu: fix lifetime issue of amdgpu_vm_get_task_info_pasid()

The vm pointer returned from amdgpu_vm_get_vm_from_pasid() is only valid while the lock is still being held. Once xa_unlock_irqrestore is called and returned, the pointer is no longer under lock and is subject to modification. Since, the caller still dereferences vm->task_info in amdgpu_vm_get_task_info_vm() after the lock is removed, this causes a use after unlock problem.

Remove the lifetime issue present in amdgpu_vm_get_task_info_pasid() through removing the amdgpu_vm_get_vm_from_pasid() function from amdgpu_vm.c and making the relevant code inline to hold the lock while it is still in use.

(cherry picked from commit 9d01579f3f868b333acc901815972685989092c7)(CVE-2026-68245)

In the Linux kernel, the following vulnerability has been resolved:

wifi: cfg80211: cancel sched scan results work on unregister

cfg80211_sched_scan_results() can queue rdev->sched_scan_res_wk from a driver result notification while a scheduled scan request is present. The work callback recovers the containing cfg80211_registered_device and then locks the wiphy and walks the scheduled-scan request list.

wiphy_unregister() already makes the wiphy unreachable and drains rdev work items before cfg80211_dev_free() can release the object, but it does not drain sched_scan_res_wk. A queued or running result work item can therefore cross the unregister/free boundary and access freed rdev state.

The buggy scenario involves two paths, with each column showing the order within that path:

scheduled-scan result path: unregister/free path:

1. cfg80211_sched_scan_results() 1. interface teardown stops and queues rdev->sched_scan_res_wk. removes the scheduled scan request.
2. cfg80211_wq starts the work 2. wiphy_unregister() drains other item and recovers rdev. rdev work items.
3. The worker locks rdev->wiphy 3. cfg80211_dev_free() destroys and and walks rdev state. frees rdev.

Cancel sched_scan_res_wk in wiphy_unregister() alongside the other rdev work items. cancel_work_sync() removes a pending result notification and waits for an already running callback, so cfg80211_dev_free() cannot free rdev while this work item is still active.

Validation reproduced this kernel report: BUG: KASAN: use-after-free in cfg80211_sched_scan_results_wk+0x4a6/0x530 Workqueue: cfg80211 cfg80211_sched_scan_results_wk [cfg80211] Read of size 8 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 cfg80211_sched_scan_results_wk+0x4a6/0x530 srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x224/0x430 kasan_report+0xac/0xe0 lockdep_hardirqs_on_prepare+0xea/0x1a0 process_one_work+0x8d0/0x18f0 (kernel/workqueue.c:3212) lock_is_held_type+0x8f/0x100 worker_thread+0x5ad/0xfd0 __kthread_parkme+0xc6/0x200 kthread+0x31e/0x410 trace_hardirqs_on+0x1a/0x170 ret_from_fork+0x576/0x810 __switch_to+0x57e/0xe20 __switch_to_asm+0x33/0x70 ret_from_fork_asm+0x1a/0x30(CVE-2026-68414)

In the Linux kernel, the following vulnerability has been resolved:

wifi: rt2x00: avoid full teardown before work setup in probe

rt2x00lib_probe_dev() uses the full rt2x00lib_remove_dev() teardown for all probe failures. However, drv_data allocation and workqueue allocation can fail before intf_work, autowakeup_work and sleep_work have been initialized.

Do not enter the full remove path until the probe has reached the point where those work items are set up. Return directly for drv_data allocation failure, and use a small early cleanup path for workqueue allocation failure.

This issue was found by our static analysis tool and then confirmed by manual review of rt2x00lib_probe_dev() and rt2x00lib_remove_dev(). The early probe exits should not call a common teardown path that assumes the later work setup has already completed.

A QEMU PoC forced alloc_ordered_workqueue() to fail before the work initializers are reached. The resulting fail path entered rt2x00lib_remove_dev(), and DEBUG_OBJECTS reported invalid work drains with rt2x00lib_probe_dev() and rt2x00lib_remove_dev() in the stack.(CVE-2026-72005)

In the Linux kernel, the following vulnerability has been resolved:

wifi: ath9k: fix OOB access from firmware tx status queue ID

ath_tx_edma_tasklet() accesses sc->tx.txq[ts.qid] where ts.qid is a 4-bit hardware field (0-15), but the txq array only has ATH9K_NUM_TX_QUEUES (10) entries. A qid >= 10 causes an OOB array access.

Add a bounds check on ts.qid before using it as an array index.(CVE-2026-74408)

In the Linux kernel, the following vulnerability has been resolved:

drm/radeon: fix integer overflow in radeon_align_pitch()

radeon_align_pitch() has the same kind of overflow issue as the old amdgpu helper: both the alignment round-up add and the final 'aligned * cpp' calculation can overflow signed int.

If that wraps, radeon_mode_dumb_create() can end up returning an invalid pitch or creating a zero-sized dumb buffer.

Fix this by using check_add_overflow() for the alignment round-up and check_mul_overflow() for the final pitch calculation, returning 0 on overflow. Also reject zero pitch and size in radeon_mode_dumb_create().

Found via AST-based call-graph analysis using sqry.(CVE-2026-74417)

In the Linux kernel, the following vulnerability has been resolved:

sctp: clear new_transport when removing a peer

sctp_process_asconf_param() stores a newly added peer transport in asoc->new_transport. After all parameters in the ASCONF chunk have been processed, sctp_sf_do_asconf() uses this pointer to send a HEARTBEAT to the new transport.

An authenticated ASCONF from a remote SCTP peer can add a transport and remove it again with a wildcard DEL-IP parameter in the same chunk. The wildcard deletion preserves the transport on which the ASCONF arrived, but removes the newly added transport through sctp_assoc_del_nonprimary_peers(). The removal does not clear asoc->new_transport, leaving it pointing to the removed transport.

sctp_sf_do_asconf() then creates a HEARTBEAT whose chunk->transport points to the removed transport without holding a transport reference. During local address replacement, src_out_of_asoc_ok keeps this HEARTBEAT on control_chunk_list. After the transport is freed by RCU, a successful ASCONF_ACK for the replacement address releases the queued HEARTBEAT and sctp_outq_select_transport() reads the freed transport's state.

The issue was found during a static audit of SCTP objects. With an authenticated peer, the reproducer triggered the same KASAN report in 2 of 2 unpatched runs on a KASAN-enabled netdev/main kernel:

BUG: KASAN: slab-use-after-free in sctp_outq_select_transport Read of size 4 at addr ffff88800b9bd95c by task python3/197

Call Trace: sctp_outq_select_transport+0x549/0x8b0 [sctp] sctp_outq_flush+0x306/0x2c60 [sctp] sctp_transport_immediate_rtx+0xaf/0x260 [sctp] sctp_process_asconf_ack+0xa48/0xf70 [sctp]

Allocated by task 197: sctp_transport_new+0x68/0x650 [sctp] sctp_assoc_add_peer+0x258/0x12a0 [sctp] sctp_process_asconf+0x5e9/0x1090 [sctp]

Last potentially related work creation: __call_rcu_common.constprop.0+0x77/0xb70 sctp_assoc_del_nonprimary_peers+0x7c/0xd0 [sctp] sctp_process_asconf+0xd9c/0x1090 [sctp]

The first invalid access was a four-byte read of transport->state at net/sctp/outqueue.c:833. The same reproducer completed the full authenticated ASCONF and local-address replacement sequence with this change without a KASAN report or oops.

Clear new_transport when its peer is removed, before it can be used to create the HEARTBEAT.(CVE-2026-74586)

In the Linux kernel, the following vulnerability has been resolved:

sched/psi: Shut down rtpoll_timer in psi_cgroup_free()

psi_schedule_rtpoll_work() is called locklessly from the scheduler hotpath and can race psi_trigger_destroy() taking down the last rtpoll trigger under rtpoll_trigger_lock:

psi_schedule_rtpoll_work() psi_trigger_destroy()

rcu_read_lock(); task = rcu_dereference(rtpoll_task); rcu_assign_pointer(rtpoll_task, NULL); timer_delete(&rtpoll_timer); mod_timer(&rtpoll_timer, ...); rcu_read_unlock(); synchronize_rcu(); kthread_stop(task_to_destroy);

The group can then be freed with the re-armed timer still pending, and poll_timer_fn() runs on freed memory.

461daba06bdc ("psi: eliminate kthread_worker from psi trigger scheduling mechanism") deleted the timer synchronously after the synchronize_rcu(), which prevented this but raced trigger creation instead: the deletion could cancel the timer that a new trigger set armed during the grace period and, as creation also reinitialized the timer at the time, corrupt it. 8f91efd870ea ("psi: Fix race between psi_trigger_create/destroy") moved the initialization into group_init() and the deletion into the locked section, trading the creation races for the window above.

Neither placement in the destruction path works. A pending timer firing while the group is alive is harmless though. poll_timer_fn() just wakes the rtpoll waitqueue and doesn't re-arm itself. Bind the timer to the group's lifetime instead and shut it down in psi_cgroup_free(). Nothing can arm it by then. timer_shutdown_sync() because the timer is never armed again.(CVE-2026-74594)

In the Linux kernel, the following vulnerability has been resolved:

tipc: read le->link under the node lock in tipc_node_link_down()

tipc_node_link_down() caches the link pointer before taking n->lock:

struct tipc_link *l = le->link;		/* unlocked */

if (!l)
	return;
tipc_node_write_lock(n);
if (!tipc_link_is_establishing(l)) {	/* deref l */
...
	tipc_link_reset(l);		/* write into l */
if (delete) {
	kfree(l);
	le->link = NULL;

The delete=true caller frees that very object under n->lock, so the lock does not protect the cached pointer against it:

• CPU A, delete=false: tipc_rcv() on TIPC_LINK_DOWN_EVT, or the link supervision timer via tipc_node_timeout(), reads l unlocked and then dereferences it under n->lock;
• CPU B, delete=true: netlink TIPC_NL_BEARER_DISABLE -> bearer_disable() -> tipc_node_delete_links() -> tipc_node_link_down(n, bearer_id, true) -> kfree(l).

The link is freed with plain kfree(), not kfree_rcu(), and for UDP bearers disable_media() only schedules the asynchronous cleanup_bearer() work, so its synchronize_net() runs after the links are already gone. An in-flight CPU A that has read l therefore dereferences freed memory once B frees it: a use-after-free read in tipc_link_is_establishing(), and a use-after-free write via tipc_link_reset() on the establishing branch.

The following trace was captured on 7.2.0-rc5-00284-gaf39eb111ce6:

BUG: KASAN: slab-use-after-free in tipc_link_is_establishing (net/tipc/link.c:285) Read of size 4 at addr ffff88802e2aa068 by task swapper/2/0 tipc_link_is_establishing (net/tipc/link.c:285) tipc_node_link_down (net/tipc/node.c:1076) tipc_node_timeout (net/tipc/node.c:843) Allocated by task 9549: tipc_link_create (net/tipc/link.c:490) tipc_node_check_dest (net/tipc/node.c:1279) tipc_disc_rcv (net/tipc/discover.c:252) tipc_udp_recv (net/tipc/udp_media.c:389) Freed by task 9549: tipc_node_link_down (net/tipc/node.c:1084) tipc_node_delete_links (net/tipc/node.c:1320) bearer_disable (net/tipc/bearer.c:414) __tipc_nl_bearer_disable (net/tipc/bearer.c:992)

Move the le->link read inside tipc_node_write_lock(), so it is serialised against the kfree() in the delete path. A racing teardown now either has not run yet, and we see a valid link, or has already run, and we see NULL.(CVE-2026-74609)

In the Linux kernel, the following vulnerability has been resolved:

packet: use consistent hard_header_len in TX_RING send path

tpacket_snd() reads dev->hard_header_len independently for skb allocation and header construction in tpacket_fill_skb(). Concurrent netdevice reconfiguration can therefore make the reserved headroom smaller than the amount later pushed, or make copylen - hard_header_len negative.

Snapshot hard_header_len once before processing ring frames and use it for the frame limit, headroom allocation, copy length, and skb construction. Pass the snapshot to tpacket_fill_skb().

The separate SOCK_DGRAM consistency problem between hard_header_len and header_ops->create is not addressed here.(CVE-2026-74668)

In the Linux kernel, the following vulnerability has been resolved:

sctp: clear control chunk transport if it is being removed

sctp_make_heartbeat_ack() caches the destination transport in chunk->transport without taking a reference. When src_out_of_asoc_ok is enabled, the HEARTBEAT ACK may remain queued on control_chunk_list instead of being transmitted immediately.

If the peer transport is removed while the chunk is still queued, sctp_assoc_rm_peer() drops the transport and schedules it for RCU freeing, but only clears cached transport pointers in out_chunk_list. The queued control chunk therefore retains a dangling transport pointer.

Once an ASCONF_ACK clears the suppression and the queued control chunk is transmitted, SCTP dereferences the stale transport pointer, leading to a use-after-free.

Fix this by also clearing chunk->transport for queued control chunks in control_chunk_list when removing the transport.(CVE-2026-74688)

In the Linux kernel, the following vulnerability has been resolved:

s390/vfio_ccw: Implement a crw lock

Unlike the channel_program struct, which covers synchronous I/O submissions and asynchronous interrupts, the CRW region relies exclusively on asynchronous events coming from hardware.

Implement a lock to manage the list of those payloads, to ensure they are read cohesively.(CVE-2026-80547)

In the Linux kernel, the following vulnerability has been resolved:

s390/vfio_ccw: Selectively expand io_mutex

The io_mutex was defined to serialize the io_regions, but then has also sort of been associated with the I/O themselves because of the close relationship they share.

With the handful of races that are possible, the choices are either to: A) expand the scope of io_mutex to close these remaining windows, or B) reduce the scope of io_mutex to just io_region, and introduce a new lock mechanism for the remaining I/O resources

This patch implements A, since B brings with it a lot more interactions that would need to be tracked and kept in a correct hierarchy. It also takes advantage of the workqueue element for cp_free() that now gets called out of fsm_notoper(), which could be invoked out of an interrupt context and thus cannot acquire a mutex itself.(CVE-2026-80548)

In the Linux kernel, the following vulnerability has been resolved:

s390/vfio_ccw: Ensure first IDAW remains constant

The first IDAW in a list does not need to be on a 2K/4K boundary like all others, and so is read separately to accurately calculate the size of the buffer needed to read the full IDAL.

Verify that the address found in the first IDAW is unchanged between reads, to ensure a consistent set of IDAWs being worked with.(CVE-2026-80551)

In the Linux kernel, the following vulnerability has been resolved:

s390/vfio_ccw: Limit the number of channel program segments

The processing of channel programs, and the CCWs within them, is done recursively. As such, there is an arbitrary (but not architectural) limit to the number of CCWs that can exist in a single channel program.

The vfio-ccw logic breaks these channel programs into segments whenever it encounters a Transfer-In-Channel (TIC) CCW, and the combined number of segments count towards the global limit. Impose an equivalent limit to the number of segments until such logic can be made non-recursive.(CVE-2026-80554)

In the Linux kernel, the following vulnerability has been resolved:

Input: synaptics-rmi4 - fix F55 transmitter electrode count typo

During F55 sensor detection, the transmitter (TX) electrode count was incorrectly assigned the value of the receiver (RX) electrode count due to copy-paste typos.

This incorrect value was then propagated to the driver data and used by F54 to determine the diagnostics report size. On devices with more RX than TX electrodes, this inflated the perceived TX count, leading to incorrect report size calculations and potential out-of-bounds buffer accesses.

Fix the typos by correctly assigning the TX electrode counts.(CVE-2026-80754)

In the Linux kernel, the following vulnerability has been resolved:

xfs: validate attr entry pointer before field access

xfs_attr3_leaf_verify_entry() accesses lentry/rentry fields (namelen, valuelen) before checking if the entry pointer itself is within bounds. If nameidx is crafted to point near the end of the buffer, these field accesses can read out-of-bounds before the bounds check at name_end > buf_end is performed.

Add explicit bounds checks for entry pointers before accessing their fields. Use offsetof() to check that the start of the flexible array member (nameval/name) is within bounds, which ensures all preceding fields are safe to access.(CVE-2026-80805)

In the Linux kernel, the following vulnerability has been resolved:

ext4: don't enable DAX on new encrypted files

Currently, when a new encrypted regular file is created, the call to ext4_set_inode_flags(inode, init=true) in __ext4_new_inode() is made before EXT4_INODE_ENCRYPT is set. As a result, it can set S_DAX if the filesystem is mounted with "-o dax=always".

EXT4_INODE_ENCRYPT then actually gets set a bit later in __ext4_new_inode(), when it calls fscrypt_set_context() which calls ext4_set_context(). ext4_set_context() sets EXT4_INODE_ENCRYPT and calls ext4_set_inode_flags(inode, init=false) to set S_ENCRYPTED too.

This was intended to clear S_DAX as well. However, this was broken by commit 043546e46dc7 ("fs/ext4: Only change S_DAX on inode load"). This causes data written to the file to bypass encryption, also causing xfstests failures such as generic/548 (when "-o dax=always" is used).

Fix this by simplifying the flow by making __ext4_new_inode() set EXT4_INODE_ENCRYPT earlier. This makes it take effect in ext4_set_inode_flags(inode, init=true), making S_DAX never be set.

Similarly, make EXT4_STATE_MAY_INLINE_DATA never be set in the first place on new encrypted inodes. Then it doesn't need to be cleared.

As a result of these simplifications, ext4_set_context() no longer needs to change inode flags or state when 'handle != NULL'. Remove that too.(CVE-2026-80806)

In the Linux kernel, the following vulnerability has been resolved:

usb: gadget: f_tcm: keep port count until LUN teardown completes

tcm_usbg_drop_nexus() permits session removal once tpg_port_count reaches zero. However, usbg_port_unlink() currently decrements that count from the fabric_pre_unlink() callback, before core_dev_del_lun() waits for active se_lun references to drain.

If removal of the last LUN races a nexus removal, the latter can observe a zero port count and call target_remove_session(). This frees sess_cmd_map while an in-flight struct usbg_cmd, including its work item, can still be accessed.

Overlapping the last-LUN unlink with nexus removal reproduces this lifetime violation as a DEBUG_OBJECTS "free active" warning for usbg_cmd_work, followed by a target-core BUG/Oops.

The generic target-core unlink path has no callback after core_dev_del_lun() completes. Add an optional fabric_post_unlink() callback and use it for the f_tcm port count. The count now remains nonzero until core_dev_del_lun() has finished draining active LUN references, preventing nexus removal from freeing the session during command completion.(CVE-2026-80854)

In the Linux kernel, the following vulnerability has been resolved:

KVM: s390: vsie: zero stale crypto bits

When shadowing crypto access bits from a format0 apcb (crycb 0 or 1), the bits 64..255 are unchanged from whatever is in the vsie page in the crycb and thus in the apcb. This gives a nested guest potential access to a device no longer available. Zero out the remaining bits.(CVE-2026-80921)

In the Linux kernel, the following vulnerability has been resolved:

net/smc: do not dereference an unset send buffer on the SMC-D teardown path

smc_close_stream_wait() calls smc_tx_prepared_sends() from inside its sk_wait_event() condition, and sk_wait_event() evaluates that condition once with the socket lock released. smcd_buf_detach() clears conn->sndbuf_desc from smc_conn_kill() under lock_sock(), so a link group terminating while a socket waits there leaves the helper dereferencing NULL, faulting out of close(). SIOCOUTQ reads the field by hand, and smc_close_cancel_work() drops the lock across two cancel_*_sync() calls.

Sample the pointer once in the helper, report nothing prepared while it is unset, and bound the ioctl the same way. The receive tasklet dereferences the field directly in smc_cdc_msg_recv_action(), not through this helper; 1/2 is what keeps it from running that late.(CVE-2026-80984)

In the Linux kernel, the following vulnerability has been resolved:

net: thunderbolt: Mark the connection down when bringing it up fails

Every failure path in tbnet_connected_work() undoes its own work and returns without clearing login_sent, so the connection still looks established. The next tbnet_tear_down() therefore takes its main branch and repeats a teardown that already happened: it stops rings that are already stopped, which is a dev_WARN() and fatal under panic_on_warn, and it releases net->remote_transmit_path even on the HopID mismatch path, where this connection never owned that id, silently freeing one that someone else is still using.

Clear login_sent on those paths. That is enough for tbnet_tear_down() to leave the unwound state alone, and login_received has to stay set: it records that the peer has logged in and carries the transmit path it gave us, which nothing on this side can make the peer send again. Two things change beyond keeping the teardown out of the way: the logout request in that block is no longer sent, and the peer's next login request now re-queues our login work rather than connected_work, giving the connection a fresh login instead of a retry on stale state.(CVE-2026-80989)

In the Linux kernel, the following vulnerability has been resolved:

net: openvswitch: fix flow mask use-after-free on flow deletion

The commit in the Fixes tag below made so flow->mask free is scheduled via RCU right after it is removed from the flow table. The pointer stays in the flow structure and it can be accessible while in the same RCU critical section. This is done to avoid requiring ovs_mutex for the ovs_flow_free().

However, while removing the flow during processing of CMD_DEL, we do not take RCU read lock before the removal, and ovs_flow_cmd_fill_info() uses the flow->mask pointer afterwards. The RCU read lock is taken, but it's already late at that point. The comment on that line acknowledges that the lock is cosmetic and doesn't serve a real purpose.

This leads to use-after-free if the RCU grace period passes between removal and the filling. It is a short race window, but it is there and can lead to a real crash in case memory allocation for the info takes a bit longer:

BUG: KASAN: slab-use-after-free in __ovs_nla_put_key net/openvswitch/flow_netlink.c:1996 BUG: KASAN: slab-use-after-free in ovs_nla_put_key+0x2463/0x2e30 net/openvswitch/flow_netlink.c:2250 Read of size 4 at addr ffff88801ee89970 by task ovs_flow_del_ec/9487

Call Trace: <TASK> __ovs_nla_put_key net/openvswitch/flow_netlink.c:1996 ovs_nla_put_key+0x2463/0x2e30 net/openvswitch/flow_netlink.c:2250 ovs_flow_cmd_fill_info+0x420/0x9c0 net/openvswitch/datapath.c:930 ovs_flow_cmd_del+0x53a/0x970 net/openvswitch/datapath.c:1467 ... netlink_rcv_skb+0x156/0x420 net/netlink/af_netlink.c:2556 </TASK>

Allocated by task 9487: mask_alloc net/openvswitch/flow_table.c:967 flow_mask_insert net/openvswitch/flow_table.c:1012 ovs_flow_tbl_insert+0xea2/0x1a90 net/openvswitch/flow_table.c:1084 ovs_flow_cmd_new+0x7e3/0xd90 net/openvswitch/datapath.c:1086 ... netlink_rcv_skb+0x156/0x420 net/netlink/af_netlink.c:2556

Freed by task 9485: rcu_free_sheaf+0x1e/0x100 mm/slub.c:5978 rcu_do_batch kernel/rcu/tree.c:2645 rcu_core+0x59c/0x10c0 kernel/rcu/tree.c:2897 handle_softirqs+0x1e4/0x9a0 kernel/softirq.c:622 ... instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062

ovs_flow_tbl_remove() must be called after the ovs_flow_cmd_fill_info() to avoid this race. This also helps with cleaning up the forced cast and the cosmetic RCU read lock. Before the commit in the Fixes tag the order did not matter as long as the flow object itself was not freed.

A wider RCU critical section could be another option, but we have a GFP_KERNEL allocation in the way.

Reported by Trend Micro's Zero Day Initiative as ZDI-CAN-32042.(CVE-2026-80994)

In the Linux kernel, the following vulnerability has been resolved:

mmc: via-sdmmc: stop card-detect handling on probe failure

request_irq() registers the SD card-detect interrupt and the probe enables it before mmc_add_host() runs. If mmc_add_host() fails, the error path only unmaps the registers and returns: the interrupt stays registered, so the handler keeps running against the host once it is freed. via_sdc_isr() dereferences sdhost and its MMIO base and schedules carddet_work, which via_sdc_card_detect() also runs against freed memory through its container_of() dereference.

Add a probe-error path that disables and frees the interrupt and cancels carddet_work before unmapping. carddet_work can re-enable the device interrupt via via_reset_pcictrl(), which restores PCIINTCTRL, so mask it again after cancelling the work.

This issue was found by an in-house static analysis tool and confirmed by manual code review.(CVE-2026-89440)

In the Linux kernel, the following vulnerability has been resolved:

sctp: fix NULL deref on untransmitted RECONF completion

sctp_process_strreset_outreq(), sctp_process_strreset_addstrm_out() and sctp_process_strreset_resp() complete a pending stream reconfiguration request by stopping the reconf timer on the transport it was sent on:

t = asoc->strreset_chunk->transport;
if (timer_delete(&t->reconf_timer))
	sctp_transport_put(t);

chunk->transport is assigned by __sctp_packet_append_chunk() when the chunk is appended to an outbound packet, and sctp_outq_flush_ctrl() arms the reconf timer at that same point. A request already published in asoc->strreset_chunk but not yet transmitted has neither, so completing it dereferences NULL.

Two ways to get there. sctp_send_asconf_del_ip() sets asoc->src_out_of_asoc_ok without sending anything when the address being removed is the association's last one, and sctp_outq_flush_ctrl() then leaves every non-ASCONF control chunk queued; as only sctp_process_asconf_ack() clears that flag, it persists. An unprivileged process that removes such an address and then asks for a stream reset panics the kernel from softirq. A peer needs neither ASCONF nor local help: sctp_cmd_interpreter() uncorks the outqueue only once the whole packet has been processed, so a reply built while walking a RECONF chunk stays untransmitted for the rest of that walk, and one RECONF chunk carrying [Incoming SSN Reset Request, Outgoing SSN Reset Request, Response] -- or two RECONF chunks in one packet -- reaches the same dereference.

KASAN: null-ptr-deref in range [0x00000000000001e8-0x00000000000001ef] RIP: 0010:timer_delete+0x67/0x110 Call Trace: <IRQ> sctp_process_strreset_addstrm_out (net/sctp/stream.c:832) sctp_sf_do_reconf (net/sctp/sm_statefuns.c:4212) sctp_do_sm (net/sctp/sm_sideeffect.c:1172) sctp_assoc_bh_rcv (net/sctp/associola.c:1044) sctp_rcv (net/sctp/input.c:243) ip_local_deliver (net/ipv4/ip_input.c:262) process_backlog (net/core/dev.c:6680) </IRQ>

A response can only acknowledge a request that was actually sent, so do not match asoc->strreset_chunk while chunk->transport is NULL. Guarding the lookup covers all three completion sites.(CVE-2026-89477)

In the Linux kernel, the following vulnerability has been resolved:

nvme-tcp: reject a read that transferred too few bytes

nvme_tcp_recv_data() completes a request once the current C2HData PDU has been consumed. Nothing compares the total bytes received against the length the command asked for: struct nvme_tcp_request has no receive-side counter, queue->data_remaining is per queue, and blk_mq_end_request() completes for blk_rq_bytes(rq) unconditionally with no residual concept anywhere above.

A controller can therefore answer a 4096-byte read with 512 bytes and have it reported as a complete read; user space then gets 4096 bytes of which 3584 are whatever was already in the page. I reproduced that with a test target.

Count the bytes received and refuse to complete a successful read whose count does not match, at the two NVME_TCP_F_DATA_SUCCESS paths and in nvme_tcp_process_nvme_cqe(). The success test shifts req->status right by one, because the driver keeps the wire value there and shifts it on completion, so the check must see what the completion path will see. Only REQ_OP_READ is checked, because there the length comes from the sectors the request covers; a passthrough command is built by its submitter, which picks both command and buffer, so the kernel has nothing to compare against.(CVE-2026-89480)

In the Linux kernel, the following vulnerability has been resolved:

nvme-tcp: fix host memory disclosure on R2T for a read command

nvme_tcp_handle_r2t() does not check the direction of the request the R2T refers to. A malicious controller can send an R2T for a READ and the host will answer it: nvme_tcp_setup_h2c_data_pdu() builds the H2CData header and nvme_tcp_try_send_data() sends the request's data buffer. That buffer is the READ destination, so its contents go to the controller.

The command then completes normally and nothing is logged.

Against a test controller that answers every READ with an R2T, a 4096 byte buffered read returned all 4096 bytes, split over two R2Ts. The pages contained stale kernel data, including an array of struct page pointers.

Reject an R2T for a request that is not a write.(CVE-2026-89481)

In the Linux kernel, the following vulnerability has been resolved:

lockd: pin next file across nlm_inspect_file lock-drop

nlm_traverse_files() pins the current file with f_count++ across a mutex_unlock for nlm_inspect_file(), but nothing pins the saved next pointer. A concurrent nlm_release_file() can kfree the next file during the unlock window, and the iterator dereferences freed memory on the next loop step.

Pin both current and next before the lock-drop. Advance by swapping the pinned cursors at the end of each iteration so next is always held alive across the unlock.

Always call nlm_file_release() after dropping the iteration pin, regardless of whether the file matched the predicate. Use nlm_file_inuse(), which does a live walk of the inode lock list, rather than the cached f_locks field, so skipped files that never ran nlm_inspect_file() are evaluated correctly.

Because every file in a hash bucket is now pinned and released, files skipped by the is_failover_file predicate that have no locks, blocks, shares, or external references are deleted during traversal. The old code never evaluated skipped files for cleanup. The new behavior is intentional: such files are stale and should not persist in the table.(CVE-2026-89485)

In the Linux kernel, the following vulnerability has been resolved:

openvswitch: only skb_tx_error() a packet we are about to drop

queue_userspace_packet() borrows the packet skb -- it only copies it into a private netlink message (user_skb) and does not own it; on return do_execute_actions() keeps forwarding it through the flow's remaining actions. Its error path nevertheless calls skb_tx_error(skb), which via skb_zcopy_clear() does skb_shinfo(skb)->flags &= ~SKBFL_ALL_ZEROCOPY, stripping SKBFL_SHARED_FRAG from that live skb (skb_tx_error()'s kerneldoc says "skb must be freed afterwards").

For a MSG_ZEROCOPY skb carrying page-cache frags, SKBFL_SHARED_FRAG is what makes esp_input() skb_cow_data() before in-place AEAD; once it is stripped a later local ESP-in-UDP delivery decrypts in place over pages the sender does not own -- an unprivileged page-cache write (the "Fragnesia" primitive). do_execute_actions() ignores output_userspace()'s return value, so any action after a failed USERSPACE upcall inherits the stripped skb.

Move the skb_tx_error() to the flow-miss drop path - the "default" branch of ovs_dp_process_packet()'s switch(error), before kfree_skb().

The call has been here since commit 36d5fe6a0007 ("core, nfqueue, openvswitch: Orphan frags in skb_zerocopy and handle errors") but was harmless until esp_input() began relying on SKBFL_SHARED_FRAG to gate in-place decrypt; only then did stripping it on a still-forwarded skb become a page-cache write primitive.(CVE-2026-89487)

In the Linux kernel, the following vulnerability has been resolved:

ocfs2: validate directory-index entry counts when reading metadata

ocfs2_validate_dx_leaf() and ocfs2_validate_dx_root() check the ECC and signature of an indexed-directory block before it reaches higher-level callers, but neither validator bounds the ocfs2_dx_entry_list counts against the capacity of the block that holds them.

ocfs2_dx_dir_search() then walks

for (i = 0; i < le16_to_cpu(entry_list->de_num_used); i++)
	dx_entry = &entry_list->de_entries[i];

over de_num_used entries with no bounds check. entry_list is either dx_leaf->dl_list (from ocfs2_read_dx_leaf) or, for an inline root, dx_root->dr_entries. A crafted on-disk image can set de_num_used (and de_count, which is the __counted_by_le() bound of de_entries) to 0xffff and make the walk read far past the end of the 4KB metadata block, giving a slab out-of-bounds read reachable from any path lookup, stat() or open() on an indexed directory once the image is mounted.

Commit 775c17386a6f ("ocfs2: validate dx_root extent list fields during block read") already bounds dr_list for the non-inline dx_root, but left the inline dr_entries path and the dx_leaf dl_list unchecked. Add the same read-time validation for both entry lists: de_count must equal the capacity of the block (ocfs2_dx_entries_per_leaf()/per_root()) and de_num_used must not exceed de_count, rejecting corrupted metadata with -EFSCORRUPTED before ocfs2_dx_dir_search() can walk an out-of-range entry array.

de_count is always written as exactly the block capacity when a leaf or inline root is formatted, so the equality check does not reject any valid image.

Found by 0sec automated security-research tooling (https://0sec.ai).(CVE-2026-89492)

In the Linux kernel, the following vulnerability has been resolved:

qede: Fix NULL pointer dereference in TPA fragment processing

Under memory pressure, the qede driver encounters NULL pointer dereferences when processing TPA continuation fragments.

Commit 8a8633978b84 ("qede: Add build_skb() support.") accidentally dropped the assignment of tpa_info->buffer.data in qede_tpa_start().

When memory pressure causes an SKB allocation failure in qede_tpa_start(), the driver sets tpa_start_fail = true and attempts to recycle the physical page later in qede_tpa_end() via qede_reuse_page(). However, because buffer.data was left uninitialized (NULL), qede_reuse_page() pushes a "ghost" BD (valid DMA mapping but NULL data pointer) back into the active Rx ring.

The next time the hardware uses this ring slot, it passes a NULL page to qede_fill_frag_skb(), causing a kernel panic.

Example crash from production system: BUG: unable to handle kernel NULL pointer dereference at 0x8 RIP: qede_fill_frag_skb+0x96/0x430 [qede] Call Trace: qede_rx_int+0xb06/0x1de0 qede_poll+0x2f4/0x6c0 __napi_poll+0x2d/0x130

Fix the root cause by restoring the tpa_info->buffer.data assignment in qede_tpa_start(), ensuring valid pages are correctly tracked and recycled. Additionally, update the stale comment for struct qede_agg_info::buffer to reflect its current usage.(CVE-2026-89511)

In the Linux kernel, the following vulnerability has been resolved:

audit: avoid dropping live tree ref on fsnotify rule autoremove

audit_del_rule() is used for both netlink deletion templates and internal fsnotify autoremove. The former passes a parsed template which owns a temporary tree reference; the latter passes the installed entry itself.

The unconditional audit_put_tree() at the end of audit_del_rule() assumes the template case. For mixed AUDIT_DIR plus AUDIT_EXE rules, an fsnotify autoremove event therefore drops the installed rule's live tree reference. Repeating this across rules sharing the same tree can free the tree while another rule still references it, and a later autoremove dereferences the freed pathname while comparing rules.

Move the temporary-tree put to audit_rule_change(), the caller that owns deletion templates. Keep it in the AUDIT_DEL_RULE cleanup so both successful deletion and -ENOENT still release the parser-owned tree.

PM: dropped unnecessary comment for line length reasons

In the Linux kernel, the following vulnerability has been resolved:

nfsd: revoke copy-notify stateids before dropping their reference

Copy-notify stateids live in the s2s_cp_stateids IDR and on their parent stid's sc_cp_list, pinned by a single membership reference. _free_cpntf_state_locked() only unlinks an entry once its refcount reaches zero, so any revoke path that runs while a concurrent find_cpntf_state()/manage_cpntf_state() holder has elevated cs_count drops the reference without unlinking, leaving the entry discoverable with its membership reference already consumed. A second revoke or a laundromat tick then frees it while the reader still holds the pointer -- a KASAN-detectable use-after-free at the reader's nfs4_put_cpntf_state().

This affected all three revoke paths:

• The parent-stid drain (nfs4_free_cpntf_statelist()) repeatedly called _free_cpntf_state_locked() on the first list entry; a holder that had bumped cs_count made it return early, so the next iteration re-decremented and burned the holder's reference.

• OFFLOAD_CANCEL (manage_cpntf_state()) and laundromat expiry likewise used _free_cpntf_state_locked() and could drop 2->1 without unlinking.

Add revoke_cpntf_state_locked(), which unhashes the entry from the IDR and sc_cp_list first (deferring the final free to any holder), and use it from all three revoke paths. The drain now walks with list_for_each_entry_safe() and revokes each entry unconditionally, so it terminates in one pass per entry regardless of cs_count. The unhash is gated on !list_empty(&cps->cp_list); the idr_remove() gate matters because idr_alloc_cyclic() may have recycled the so_id by then. Keep _free_cpntf_state_locked() for the reference-holder put path only, where a concurrent revoke may already have unlinked the entry (its list_del_init() then a no-op).(CVE-2026-89663)

In the Linux kernel, the following vulnerability has been resolved:

nfsd: gate nfs2 setacl by argp->mask

The NFSACL v2 SETACL path shares the decoder convention used by its v3 sibling: nfsaclsvc_decode_setaclargs() fills in argp->acl_access only when NFS_ACL is set in the request mask and argp->acl_default only when NFS_DFACL is set, leaving the other pointer NULL because the argument buffer is zeroed up to pc_argzero before decode.

nfsacld_proc_setacl() then hands both pointers to set_posix_acl() unconditionally. set_posix_acl(idmap, dentry, type, NULL) is the VFS "remove this ACL type" operation, so an omitted arm is indistinguishable from an explicit request to delete that ACL. A SETACL carrying only NFS_ACL silently strips the directory's default ACL; mask=0 strips both.

This is the same defect just fixed in nfsd3_proc_setacl(); apply the same remedy. Gate each set_posix_acl() call on its mask bit and initialize error to 0 so that a request with neither bit set leaves the on-disk ACLs untouched and returns success. The out_drop_lock path and the unconditional posix_acl_release() in nfsaclsvc_release_setacl() already tolerate the skipped arms.(CVE-2026-89672)

In the Linux kernel, the following vulnerability has been resolved:

nfsd: fix stale s2s_cp_stateids IDR entry for async COPY

For an async COPY, nfsd4_copy() called nfs4_init_copy_state() before dup_copy_fields(), so the s2s_cp_stateids IDR was pointed at &u->copy->cp_stateid -- memory in the per-rqstp COMPOUND buffer that is reused by the next request. dup_copy_fields() copies only the value into async_copy, so the IDR slot dangled at the transient buffer for the whole background copy. Any IDR walker then dereferences reused request memory: the laundromat reads cs_type from it and, if the bytes look like an expired NFS4_COPYNOTIFY_STID, follows into refcount_dec()/idr_remove()/kfree() on garbage; manage_cpntf_state() has the same exposure via idr_find().

Duplicate the fields first, then register the stateid on the stable async_copy. result->cb_stateid is unchanged.(CVE-2026-89676)

In the Linux kernel, the following vulnerability has been resolved:

nfsd: validate symlink target length in NFSv4 CREATE

nfsd4_decode_create() accepts an unbounded cr_datalen from the wire for NF4LNK symlink targets, allowing a client to force a kmalloc of up to the maximum RPC payload size (several MiB) per COMPOUND op that persists until compound teardown. The VFS rejects oversized targets with ENAMETOOLONG, but the allocation has already occurred.

Reject cr_datalen == 0 early with nfserr_inval and cr_datalen greater than NFS4_MAXPATHLEN (PATH_MAX) with nfserr_nametoolong to bound the allocation.(CVE-2026-89699)

In the Linux kernel, the following vulnerability has been resolved:

NFSD: remove flawed WARN_ON_ONCE from nfsd_mode_check

The header for commit e75b23f9e323 ("nfsd: check d_can_lookup in fh_verify of directories") details the assumption that justified adding the WARN_ON_ONCE to nfsd_mode_check(), that assumption is invalid (in the case of NFS reexport).

When NFSD exports an NFS filesystem it is very possible for nfsd_mode_check() to encounter a @dentry that doesn't have i_op->lookup (see nfs_fhget()'s NFS_ATTR_FATTR_MOUNTPOINT and NFS_ATTR_FATTR_V4_REFERRAL handling, and d_flags_for_inode()).

So remove nfsd_mode_check()'s WARN_ON_ONCE(). The nfserr_notdir return on that branch must stay. It guards the subsequent lookup_one_unlocked() -> __lookup_slow() path, which calls inode->i_op->lookup() with no NULL check, so returning nfserr_notdir is what keeps a client LOOKUP into such a @dentry from dereferencing a NULL method pointer.(CVE-2026-89711)

In the Linux kernel, the following vulnerability has been resolved:

NFSD: check truncate permission under inode lock

nfsd_setattr() checks whether a size update needs NFSD_MAY_TRUNC before it takes inode_lock(). The comparison uses the file size sampled by that unlocked read, but the actual ATTR_SIZE update is applied later under inode_lock() by notify_change().

This leaves a TOCTOU window for append-only files. If a client sends a SETATTR that does not shrink the file at the time of the unlocked sample, a concurrent append can extend the file before nfsd_setattr() takes inode_lock(). notify_change() then applies a real truncation without the NFSD_MAY_TRUNC check that rejects IS_APPEND(inode). The VFS truncate syscall paths perform their own append-only checks before calling notify_change(), so NFSD must make this decision against the locked size it is about to change.

Split the write-count acquisition from the truncation permission check. Keep get_write_access() before the locked setattr work, then recheck whether the requested size is below i_size_read(inode) after inode_lock() has been acquired and before notify_change(ATTR_SIZE). This also avoids the plain unlocked inode->i_size load.(CVE-2026-89713)

In the Linux kernel, the following vulnerability has been resolved:

HID: sensor-hub: Fix out-of-bounds write in sensor_hub_get_feature

sensor_hub_get_feature() clamps its return value to the caller's buffer size, but the copy loop still copies field->report_size / 8 bytes for each report value. A malicious HID descriptor can advertise a large feature field size while an IIO caller supplies a small stack buffer, such as a single s32, causing an out-of-bounds write.

HID core stores parsed report values in __s32 slots and clamps extracted values to 32 bits. Reject feature fields that require more than one slot per value, guard the total byte count calculation, and clamp each per-value copy to the remaining caller buffer.(CVE-2026-89729)

In the Linux kernel, the following vulnerability has been resolved:

fs: fix user path of nested backing files

backing_file_open() derives the path to be stored in the new backing file from user_file->f_path. This is incorrect when user_file itself is a backing file, which is the case for nested stacking filesystems, e.g. overlayfs mounts where the lowerdir of one overlayfs is the merged directory of another. Since commit def3ae83da02 ("fs: store real path instead of fake path in backing file f_path") the f_path of a backing file holds the real path of the intermediate layer, not the path that the user opened.

Commit 924577e4f6ca ("ovl: Fix nested backing file paths") fixed this for such configurations by passing file_user_path() from ovl_open_realfile(). However, commit 6af36aeb147a ("lsm: add backing_file LSM hooks") changed the first argument of backing_file_open() from the user path back to the user file and derived the path from user_file->f_path again, silently re-introducing the problem.

As a result, files mapped through a nested overlayfs show the wrong path in /proc/<pid>/maps and in perf/ftrace mmap records. For example, with two nested overlayfs mounts:

mkdir -p /ovl/{lower,upper,work,merged} /ovl/nested echo hello > /ovl/lower/foo mount -t overlay overlay
-o lowerdir=/ovl/lower,upperdir=/ovl/upper,workdir=/ovl/work
/ovl/merged

at least two lowerdirs are needed when upperdir is nonexistent

mount -t overlay overlay
-o lowerdir=/ovl/merged:/ovl/lower /ovl/nested

mapping /ovl/nested/foo shows a disconnected path instead of the user path:

readlink /proc/self/fd/3

/ovl/nested/foo

grep foo /proc/self/maps

7f6e2c100000-7f6e2c101000 r--s 00000000 00:24 15813027 /foo

The bogus path is derived from the f_path of the intermediate backing file, whose mount is a private clone that d_path() cannot resolve.

Fix this by using file_user_path(), which returns the outermost user-visible path for backing files and falls back to &user_file->f_path for regular files. This restores the behavior of commit 924577e4f6ca ("ovl: Fix nested backing file paths") for overlayfs and also fixes the same problem for the other backing_file_open() callers, fuse passthrough and erofs ishare, when their user file is itself a backing file.

backing_tmpfile_open() has the same pattern but is not affected: it is only called by ovl_create_tmpfile() for the upper layer, and another overlayfs is rejected as upperdir by the DCACHE_OP_REAL check in ovl_mount_dir_check(), so its user_file can never be a backing file.(CVE-2026-89768)

In the Linux kernel, the following vulnerability has been resolved:

isofs: fix out-of-bounds page array access on empty zisofs block

zisofs_uncompress_block()'s empty-block fast path returns pcount << PAGE_SHIFT, ignoring the incoming poffset, unlike the decompression path which returns bytes produced relative to poffset. zisofs_fill_pages() uses that return to advance its page cursor, so when the zisofs block size is below PAGE_SIZE and a sub-page block leaves poffset partway into a page, a following empty block over-counts and advances pages[] one element past its end, after which "if (poffset && *pages)" reads pages[1] out of bounds. rock.c only rejects a block-size shift > 17, so a crafted "ZF" Rock Ridge record can set it below PAGE_SHIFT; the bug is reached by an ordinary read() of a compressed file on such a mounted ISO9660 image.

Return the byte count relative to poffset and zero only [poffset, PAGE_SIZE) of the first page, matching the decompression path. The page-aligned case (poffset == 0) is unaffected.

BUG: KASAN: slab-out-of-bounds in zisofs_read_folio (fs/isofs/compress.c:290) Read of size 8 at addr ffff88800f5eac48 by task exploit/142 zisofs_read_folio (fs/isofs/compress.c:290) read_pages (mm/readahead.c:184) ... filemap_read (mm/filemap.c:2814) vfs_read (fs/read_write.c:574) __x64_sys_pread64 (fs/read_write.c:769) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) The buggy address is located 0 bytes to the right of the allocated 8-byte region in the kmalloc-8 cache(CVE-2026-89778)

In the Linux kernel, the following vulnerability has been resolved:

drm: fix race between partial drm_dev_register() failure and ioctl

If drm_dev_register() fails after registering a minor (e.g. render minor registered, primary minor fails), userspace could have opened the first minor and entered a drm_dev_enter() critical section. Since the unplugged flag was never set, the ioctl proceeds while the error path tears down device resources.

Fix this by introducing drm_dev_synchronize_unplug(), which sets the unplugged flag and waits for the SRCU barrier, ensuring all in-flight drm_dev_enter() critical sections complete before cleanup proceeds; call it on the error path of drm_dev_register().(CVE-2026-89823)

In the Linux kernel, the following vulnerability has been resolved:

scsi: qla2xxx: Fix cs84xx use-after-free on host teardown

qla84xx_put_chip() drops the last reference to ha->cs84xx and frees it via __qla84xx_chip_release() without clearing ha->cs84xx. During teardown it ran before scsi_remove_host(), which is what removes the 84xx_fw_version host sysfs attribute. A concurrent read of that attribute in the window between the two calls executes qla24xx_84xx_fw_version_show(), which dereferences the freed ha->cs84xx, resulting in a use-after-free.

Move qla84xx_put_chip() to after scsi_remove_host() in both qla2x00_remove_one() and qla2x00_disable_board_on_pci_error(). Once scsi_remove_host() returns, the sysfs attribute is gone and kernfs has drained any in-flight show(), so no reader can touch cs84xx; the put still runs before the host and ha are freed.(CVE-2026-89854)

In the Linux kernel, the following vulnerability has been resolved:

scsi: qla2xxx: Clamp MSI-X derived queue counts to avoid truncation

ha->msix_count is u16, but ha->max_req_queues, ha->max_rsp_queues and ha->max_qpairs are u8. Deriving the queue count as "ha->max_req_queues = ha->msix_count - 1" therefore truncates: a board (or a misconfigured/malicious hot-plugged device) advertising 257 MSI-X vectors yields msix_count - 1 == 256, which truncates to 0. An MSI-X count of 1 zeroes it as well, and in target mode the subsequent "ha->max_req_queues--" then underflows 0 to 255.

When the count is 0, qla2x00_alloc_queues() calls kzalloc_objs(struct req_que *, 0), which returns ZERO_SIZE_PTR. That is not NULL, so the allocation check passes and the following "ha->req_q_map[0] = req" dereferences ZERO_SIZE_PTR, corrupting memory or crashing the kernel.

Add qla_calc_queue_count() to clamp the derived value into [1, QLA_MAX_QUEUES - 1] so it always fits in u8 and is never zero, and use it at all three derivation sites (qla25xx_iospace_config(), qla83xx_iospace_config() and qla24xx_enable_msix()). Also guard the target-mode decrement so it cannot reintroduce a zero (which would in turn underflow max_qpairs).(CVE-2026-89856)

In the Linux kernel, the following vulnerability has been resolved:

scsi: qla2xxx: Hold vport reference in qla24xx_report_id_acquisition()

In the format 1 path, the virtual port is located on ha->vp_list while holding vport_slock, but the lock is dropped before vp is used: qla_update_host_map() is called and VP_IDX_ACQUIRED/REGISTER_FC4_NEEDED/ REGISTER_FDMI_NEEDED are set on vp. No reference is taken across that window, so a concurrent qla24xx_deallocate_vp_id() can tear the vport down and free it, leading to a use-after-free.

Take a vport reference (vref_count) under vport_slock when the matching vp is found, and drop it after the last use of vp. qla24xx_deallocate_vp_id() waits for vref_count to reach zero before unlinking and freeing the vport, so the pointer stays valid. This matches the reference idiom already used by the other ha->vp_list traversals.(CVE-2026-89861)

In the Linux kernel, the following vulnerability has been resolved:

KVM: s390: Fix memory corruption by not reinjecting CK machine checks

Channel-subsystem damage machine checks are for the host channel subsystem. The guest channel subsystem is emulated in the userspace VMM. There is no point in forwarding such machine checks into the guest.

This also simplifies the machine check reinjection and avoids kfree of a stack variable as reported by sashiko. There might be still machine checks that have the ck bit set with another bit (like instruction damage), mask out the CK bit in s390_backup_mcck_info(), like the CP and ED bits already are.(CVE-2026-89920)

In the Linux kernel, the following vulnerability has been resolved:

KVM: x86: hyper-v: Clamp stimer deadline to avoid livelock

Fix an issue where userspace or the guest can program an Hyper-V synthetic timer to have a deadline in the past via integer overflow, preventing the CPU from making progress and triggering an RCU stall.

Hyper-V's SynIC exposes 4 per-vCPU synthetic timers to the guest, which are emulated by KVM. Each is programmed through the HV_X64_MSR_STIMERi_CONFIG and HV_X64_MSR_STIMERi_COUNT MSRs. Depending on CONFIG, COUNT represents either the absolute expiration time or the period of a periodic timer, both expressed in 100ns ticks. These timers may be set both by the guest (WRMSR) and the host (KVM_SET_MSRS).

When the timer is enabled, stimer_start() translates COUNT to an absolute monotonic deadline and arms an hrtimer. If COUNT is set to a value close to U64_MAX, the deadline calculation can overflow.

ktime_add_ns(ktime_now, 100 * (stimer->exp_time - time_now))

This can result in a CPU livelock. stimer_start() arms the timer via hrtimer_start() with a deadline in the past, which causes it to immediately fire. The stimer callback then raises KVM_RQ_HV_STIMER, with the intention of causing KVM to deliver a synthetic interrupt on the next vCPU guest enter.

Then, once userspace issues KVM_RUN, vcpu_enter_guest() consumes the request, calling kvm_hv_process_stimers(). This would normally disable the timer via stimer_expiration() once the deadline is in the past. However, the deadline comparison is done between the KVM reference counter and stime->exp_time, which is a big value close to U64_MAX, so this never happens for a few thousand years.

kvm_hv_process_timers() then re-arms the timer via stimer_start(), since it was not disabled, which again fires immediately. Before entering the guest, kvm_vcpu_exit_request() checks kvm_request_pending(), which returns true due to the newly raised KVM_REQ_HV_STIMER. Then vcpu_enter_guest() aborts the guest entry, returning early into vcpu_run(), which loops back again into vcpu_enter_guest(), restarting the cycle.

Since there are no manual yields in this loop, a task with SCHED_FIFO may starve RCU grace-period kthreads, which exposes the stalls found by syzcaller:

rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu:    (detected by 1, t=10502 jiffies, g=14269, q=1142 ncpus=2)
rcu: All QSes seen, last rcu_preempt kthread activity 10500 (4294965239-4294954739), jiffies_till_next_fqs=1, root ->qsmask 0x0
rcu: rcu_preempt kthread starved for 10500 jiffies! g14269 f0x2 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0
rcu:    Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
    ( ... )
Call Trace:
 <IRQ>
 __run_hrtimer kernel/time/hrtimer.c:1773 [inline]
 __hrtimer_run_queues+0x408/0xc30 kernel/time/hrtimer.c:1841
 hrtimer_interrupt+0x45b/0xaa0 kernel/time/hrtimer.c:1903
 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1045 [inline]
 __sysvec_apic_timer_interrupt+0x102/0x3e0 arch/x86/kernel/apic/apic.c:1062
 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1056 [inline]
 sysvec_apic_timer_interrupt+0xa1/0xc0 arch/x86/kernel/apic/apic.c:1056
 </IRQ>
 <TASK>
 asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:697
RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:152 [inline]
RIP: 0010:_raw_spin_unlock_irqrestore+0xa8/0x110 kernel/locking/spinlock.c:194
Code: 74 05 e8 0b f4 5f f6 48 c7 44 24 20 00 00 00 00 9c 8f 44 24 20 f6 44 24 21 02 75 4f f7 c3 00 02 00 00 74 01 fb bf 01 00 00 00 <e8> 23 6b 27 f6 65 8b 05 7c 60 5a 07 85 c0 74 40 48 c7 04 24 0e 36
RSP: 0018:ffffc900040a7320 EFLAGS: 00000206
RAX: 5de15cb931505900 RBX: 0000000000000a06 RCX: 5de15cb931505900
RDX: 0000000000000007 RSI: ffffffff8daa9dc3 RDI: 0000000000000001
RBP: ffffc900040a73b0 R08: ffffffff8fc3d0

---truncated---(CVE-2026-89927)

In the Linux kernel, the following vulnerability has been resolved:

KVM: nVMX: Always flush vpid02 on first use

Make sure vpid02 is always flushed on first use by setting last_vpid=0 when allocating vpid02. nested_vmx_transition_tlb_flush() will always detect a VPID change on first VM-Enter after VMXON, because VPID=0 in vmcs12 is not allowed if L1 enables VPID.

This avoids using stale TLB entries from a previous lifetime of the VPID, that might have been associated with a different vCPU (or a completely different VM).

Note that last_vpid is already being initialized as 0 when the vCPU is created, but it is not reset when vpid02 is freed on VMXOFF. Hence, the problem can only occur if L1 does VMXOFF -> VMXON, runs an L2, and KVM happens to reuse a VPID that has TLB entries on the physical CPU.(CVE-2026-89932)

In the Linux kernel, the following vulnerability has been resolved:

nvdimm/btt: reject an arena whose nfree is below the lane count

The BTT info block's nfree field, the number of reserve free blocks, is read from the medium without validation. btt_freelist_init() and btt_rtt_init() size the per-lane freelist[] and rtt[] arrays by nfree, but the I/O path indexes them by the lane from nd_region_acquire_lane(), which is bounded by nd_region->num_lanes (ND_MAX_LANES), not by nfree. A crafted or foreign arena whose nfree is below the lane count makes freelist[lane]/rtt[lane] run past the allocation: an out-of-bounds write.

btt.rst documents the nlanes = min(nfree, num_cpus) invariant, which the code does not currently honor: num_lanes is ND_MAX_LANES regardless of nfree. Reject an arena whose nfree is below num_lanes at discovery, before the per-lane arrays are allocated, enforcing that invariant.(CVE-2026-89965)

In the Linux kernel, the following vulnerability has been resolved:

nvme-tcp: check the data direction of a C2HData PDU

nvme_tcp_handle_c2h_data() finds the request by command id and checks that it has a payload, but it does not check that the command asked for data to be read. A controller that answers a write command with C2HData therefore reaches nvme_tcp_recv_data(), where _copy_to_iter() hits WARN_ON_ONCE(i->data_source) and returns 0. The receive path turns that into -EFAULT and resets the controller.

No data is copied, so this is not memory corruption. What a controller gets is a kernel warning it can raise at will, which is fatal on a host booted with panic_on_warn.

The send path already knows the direction - it consults rq_data_dir() when it builds a command - and nvme_tcp_handle_r2t() checks the length and the offset of the request it names. The C2HData path does not check the direction at all.

Reject a C2HData PDU whose command is not a read. Rejecting it fails the command and resets the controller, as the neighbouring check in this function does; what goes away is the warning.

[ 6.885580] ------------[ cut here ]------------ [ 6.886457] WARNING: lib/iov_iter.c:193 at _copy_to_iter+0x289/0x1330, CPU#0: kworker/0:1H/71 [ 6.888137] CPU: 0 UID: 0 PID: 71 Comm: kworker/0:1H Not tainted 7.2.0-rc5-NVMETCP-gf5098b6bae76 #1 PREEMPT(lazy) [ 6.891165] Workqueue: nvme_tcp_wq nvme_tcp_io_work [ 6.891875] RIP: 0010:_copy_to_iter+0x289/0x1330 [ 6.903739] Call Trace: [ 6.904085] <TASK> [ 6.909254] __skb_datagram_iter+0x433/0x820 [ 6.911026] skb_copy_datagram_iter+0x37/0x120 [ 6.911622] nvme_tcp_recv_skb+0xa07/0x4320 [ 6.913378] __tcp_read_sock+0x1ab/0x810 [ 6.915788] nvme_tcp_try_recv+0x152/0x1e0 [ 6.918222] nvme_tcp_io_work+0x1e4/0x6c0 [ 6.926906] </TASK> [ 6.927226] ---[ end trace 0000000000000000 ]--- [ 6.927878] nvme nvme0: queue 1 failed to copy request 0x71 data [ 6.928709] nvme nvme0: receive failed: -14(CVE-2026-89973)

In the Linux kernel, the following vulnerability has been resolved:

dma-direct: return struct page from dma_direct_alloc_from_pool()

Commit 5b138c534fda ("dma-direct: factor out a dma_direct_alloc_from_pool helper") changed dma_direct_alloc_from_pool() to return the CPU address from dma_alloc_from_pool(). That fits dma_direct_alloc(), but dma_direct_alloc_pages() also uses the helper and expects a struct page *.

Fix this by making dma_direct_alloc_from_pool() return the struct page * again, and pass the CPU address back through an out-parameter for the dma_direct_alloc() caller.(CVE-2026-89995)

In the Linux kernel, the following vulnerability has been resolved:

usb: typec: ucsi: displayport: Fix OOB altmode array index

The UCSI displayport driver indexes the connector's port altmode array with the GET_CURRENT_CAM response after checking it is not 0xff. The port altmode array is UCSI_MAX_ALTMODES elements long. If the PPM returns an invalid GET_CURRENT_CAM response above UCSI_MAX_ALTMODES and not equal to 0xff, the kernel may crash with an array index OOB error.

Update the UCSI displayport driver to verify the current cam is less than UCSI_MAX_ALTMODES before accessing the port altmode array.(CVE-2026-90025)

In the Linux kernel, the following vulnerability has been resolved:

NFSv4/pnfs: key the data server cache on the NFS version

nfs4_pnfs_ds_add() keys the per-net data server cache on the multipath address set alone, and struct nfs4_pnfs_ds records no version. That suffices for the files layout driver, which always connects with version 4, but flexfiles takes its version tuple from GETDEVICEINFO per device, and one address can legitimately serve both NFSv3 and NFSv4.

Two deviceids on one address with different ds_versions[0].version therefore share a single nfs4_pnfs_ds, and whichever mirror connects first pins ds_clp to its own version. The other one is handed that client anyway, so it selects rpc_call_ops for a version the connection does not speak, and the mismatched sequence-slot handling dereferences NULL.

Add the version to the cache key so the two cannot alias, giving each version its own nfs4_pnfs_ds and connection while both mirrors stay usable. Only the major version is compared, since that is what selects rpc_call_ops and rpc_ops; v4.0 and v4.1 keep sharing a client. The files layout driver passes the 4 it already hardcodes at connect time.(CVE-2026-90102)

In the Linux kernel, the following vulnerability has been resolved:

NFS: Return a delegation the client fails to record

When an NFS server grants a delegation in an OPEN reply, nfs_inode_set_delegation() records it on the client. However, three of its error flows return without sending DELEGRETURN.

A delegation can be relinquished only by DELEGRETURN (RFC 8881 Section 20.2.4), so dropping one silently leaves the server believing the client still holds it. If the server happens to recall that delegation, the client answers CB_RECALL with NFS4ERR_BADHANDLE because it has no record of the stateid. The server revokes the delegation and moves it onto its cl_revoked list, because the client never sends the FREE_STATEID that would drain it. Every subsequent SEQUENCE reply then carries SEQ4_STATUS_RECALLABLE_STATE_REVOKED, and the client's state manager loops issuing TEST_STATEID across its delegations without ever clearing the condition.

The window is easy to reach now that a server offers a write delegation on any write OPEN: a delegation recalled for one opener races a re-open that the server answers with a fresh write delegation.

Instead of dropping it, hand the delegation back during these error flows.(CVE-2026-90234)

In the Linux kernel, the following vulnerability has been resolved:

drm/omap: dsi: Do not copy isr table

To be able to unregister stuff from isrs, the corresponding table was copied. Nobody seems to unregister stuff that way, so it does not help. But there are stack-allocated objects passed to these isrs giving chances of UAF of these objects if irqs are unregistered while they are handled, so better do not copy that table.(CVE-2026-90316)

In the Linux kernel, the following vulnerability has been resolved:

HID: synchronize input before cleaning up a failed probe

hid_device_io_start() allows reports to run concurrently with probe. If the probe subsequently fails, __hid_device_probe() releases driver resources and clears hdev->driver without first excluding those report callbacks.

For example, a report may enter hidraw_report_event() while the failure path frees the associated hidraw object, leading to a use-after-free when the report takes the object's list lock.

Stop input before performing failed-probe cleanup. This reacquires driver_input_lock and waits for any report callback already in progress.(CVE-2026-90329)