The Linux Kernel, the operating system core itself.
Security Fix(es):
In the Linux kernel, the following vulnerability has been resolved:
usb: typec: wcove: don't write past struct pd_message in wcove_read_rx_buffer()
wcove_read_rx_buffer() copies the PD RX FIFO into the caller's struct pd_message with
for (i = 0; i < USBC_RXINFO_RXBYTES(info); i++)
regmap_read(wcove->regmap, USBC_RX_DATA + i, msg + i);
which has two problems:
USBC_RXINFO_RXBYTES() is a 5-bit field (max 31) while struct pd_message is 30 bytes (__le16 header + __le32 payload[PD_MAX_PAYLOAD], packed). The byte count latched in RXINFO is the number of bytes the port partner put on the wire, so a malicious partner that transmits a 31-byte frame can drive the loop one byte past the destination if the WCOVE BMC receiver does not enforce the PD object-count limit in hardware. The existing FIXME flagged this as unverified.
Independently, regmap_read() takes an unsigned int * and stores a full unsigned int at the destination. Passing the byte pointer msg + i means each iteration writes four bytes; the high three are zero (val_bits is 8) and are normally overwritten by the next iteration, but the final iteration's high bytes are not. With RXBYTES == 30 the i == 29 iteration already writes three zero bytes past msg, which sits on the IRQ thread's stack in wcove_typec_irq().
Clamp the loop to sizeof(struct pd_message) and read each register into a local before storing only its low byte, so the copy can never exceed the destination regardless of what RXINFO reports.(CVE-2026-63960)
In the Linux kernel, the following vulnerability has been resolved:
dm-verity: fix buffer overflow in FEC calculation
There's a buffer overflow in dm-verity-fec:
if (neras && *neras <= v->fec->roots) fio->erasures[(*neras)++] = i;
This allows *neras to reach roots + 1 (the post-increment pushes it past roots). This value is then passed as no_eras to decode_rs8(). Inside the RS decoder (lib/reed_solomon/decode_rs.c:113-121), the erasure locator polynomial loop writes lambda[j] where j can reach nroots + 1 — one element past the end of lambda[] (which is sized nroots + 1, valid indices 0..nroots). The out-of-bounds write lands on syn[0], corrupting the syndrome buffer.(CVE-2026-72098)
In the Linux kernel, the following vulnerability has been resolved:
net/x25: fix use-after-free of the socket by its timers
The x25 timers are armed with mod_timer() and cancelled with timer_delete(), so a pending timer holds no reference on the socket and a cancel does not wait for a callback already running on another CPU.
x25_heartbeat_expiry() also rearms unconditionally, so it can reinstall sk->sk_timer after __x25_destroy_socket() has passed its cancel point. The following __sock_put() frees the socket while the timer is still queued, and the next expiry uses freed memory. KASAN reports a slab-use-after-free on the kmalloc-2k object freed by close().
timer_delete_sync() cannot be used here: x25_heartbeat_expiry() and x25_timer_expiry() both reach the cancels from inside the timer they would wait on, through __x25_destroy_socket() and x25_disconnect().
Arm the timers with sk_reset_timer() and cancel them with sk_stop_timer() so that an armed timer owns a reference, and release it in both expiry handlers. Rearm the heartbeat only while sk_hashed(sk) is still true, since __x25_destroy_socket() unlinks the socket before dropping it. Arm the deferred destroy timer the same way and drop its reference in x25_destroy_timer().
Reproduced on net with KASAN, with the heartbeat period shortened so the window recurs. With this patch the reproducer no longer triggers a report and /proc/net/x25 drains.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>(CVE-2026-74628)
In the Linux kernel, the following vulnerability has been resolved:
net: prestera: validate firmware header length
prestera_fw_hdr_parse() reads the firmware header before checking that the firmware image contains that header.
Reject images shorter than struct prestera_fw_header before decoding the magic and version fields.(CVE-2026-74693)
In the Linux kernel, the following vulnerability has been resolved:
kcov: fix data corruption and race conditions on PREEMPT_RT
syzbot is reporting KCOV state corruption on PREEMPT_RT kernels, for the temporary storage used for saving/restoring remote KCOV state is currently allocated as the per-CPU area.
On PREEMPT_RT kernels, softirq handlers run as preemptible task threads (e.g., ksoftirqd). If a softirq context preempts a task running a remote KCOV session, it safely saves the task's state into the per-CPU area. However, if that softirq thread is subsequently preempted by a higher- priority softirq thread on the same CPU, the second softirq will overwrite the same per-CPU area, permanently destroying the original task's KCOV state.
Fix this data corruption by moving the temporary storage from the per-CPU area to the per-thread area. Since each softirq thread now owns its own task context, nested softirq preemption no longer causes data overwrites.
Note that while the temporary storage is now on a per-thread basis, the per-CPU kcov_percpu_data.lock must be retained, for we need to ensure that kcov_remote_start() and kcov_remote_stop() operate atomically without racing against asynchronous interrupts that manipulate the current task's KCOV state.
It is likely that GFP_KERNEL allocation by vmalloc_node() in kcov_init() has already called panic() before returning NULL, for there will be no OOM-killable userspace processes when __init function of built-in module runs. But this patch also fixes crashing the kernel when vmalloc_node() in kcov_init() returned NULL, for kcov_init() left per-CPU irq_area == NULL but kcov_remote_start() depends on per-CPU irq_area != NULL, resulting in
(1) doing vmalloc() in kcov_remote_start() despite !in_task() context
(2) out-of-array-bounds access if (1) succeeded but kcov->remote_size < CONFIG_KCOV_IRQ_AREA_SIZE
(3) always leak memory allocated by (1), eventually killing all OOM-killable userspace processes
problems.(CVE-2026-80916)
In the Linux kernel, the following vulnerability has been resolved:
ALSA: harmony: initialize locks before requesting IRQ
snd_harmony_create() registers the IRQ before initializing h->lock and h->mixer_lock. A pending interrupt can invoke the handler while these locks are uninitialized.
Initialize both locks before requesting the IRQ so the handler always sees valid lock state.(CVE-2026-89980)
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: fix OOB write in snd_usbmidi_us122l_output()
The snd_usbmidi_us122l_output() picks a count of 2 on anything slower than high speed and never relates it to ep->max_transfer. The URB buffer holds exactly max_transfer bytes, so a device declaring a one byte bulk endpoint takes two bytes from snd_rawmidi_transmit(), and the memset that pads the rest computes 1 - 2 in int and wraps to SIZE_MAX.
Only 0x800e and 0x800f are pinned to nine bytes. The US-122MKII at 0x0644:0x8021 falls to the default and takes usb_maxpacket(), which the USB core only clamps downward.
The akai and novation output ops in this file were given the same guard recently. Do the same here.(CVE-2026-90033)
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix slab-out-of-bounds read in ksmbd_alloc_user()
ksmbd_alloc_user() copies resp->hash_sz bytes out of the mountd IPC login response with
user->passkey_sz = resp->hash_sz;
user->passkey = kmalloc(resp->hash_sz, KSMBD_DEFAULT_GFP);
if (user->passkey)
memcpy(user->passkey, resp->hash, resp->hash_sz);
resp->hash_sz is a __u16 supplied by the response, but resp->hash[] is only KSMBD_REQ_MAX_HASH_SZ bytes. A malformed or malicious login response can set hash_sz well beyond that (up to 65535), so the memcpy() reads past the end of the response object. ipc_validate_msg() does not bound hash_sz, so reject any response whose hash_sz exceeds the on-stack hash[] buffer before allocating and copying.
[ 2030.238706] BUG: KASAN: slab-out-of-bounds in ksmbd_alloc_user+0x278/0x680 [ 2030.240549] Read of size 65535 at addr ffff888121bb6680 by task kworker/4:1/18611 [ 2030.242296] [ 2030.242710] CPU: 4 UID: 0 PID: 18611 Comm: kworker/4:1 Not tainted 7.1.0-next-20260623-virtme #96 PREEMPT(lazy) [ 2030.242732] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 [ 2030.242743] Workqueue: ksmbd-io handle_ksmbd_work [ 2030.242763] Call Trace: [ 2030.242769] <TASK> [ 2030.242776] dump_stack_lvl+0xa2/0xd0 [ 2030.242794] print_address_description+0x77/0x200 [ 2030.242815] ? ksmbd_alloc_user+0x278/0x680 [ 2030.242831] print_report+0x58/0x70 [ 2030.242848] kasan_report+0x117/0x150 [ 2030.242869] ? ksmbd_alloc_user+0x278/0x680 [ 2030.242888] kasan_check_range+0x3c7/0x3f0 [ 2030.242908] ? ksmbd_alloc_user+0x278/0x680 [ 2030.242925] __asan_memcpy+0x29/0x70 [ 2030.242942] ksmbd_alloc_user+0x278/0x680 [ 2030.242960] ksmbd_login_user+0xc3/0x120 [ 2030.242978] ntlm_authenticate+0x5e6/0x1b00 [ 2030.243017] ? __pfx_ntlm_authenticate+0x10/0x10 [ 2030.243035] ? ksmbd_session_lookup+0x188/0x1d0 [ 2030.243054] ? __pfx_ksmbd_session_lookup+0x10/0x10 [ 2030.243090] ? __sanitizer_cov_trace_switch+0x7b/0x140 [ 2030.243108] smb2_sess_setup+0x1e4a/0x27b0 [ 2030.243126] ? copy_from_kernel_nofault+0x199/0x300 [ 2030.243156] ? __pfx_smb2_sess_setup+0x10/0x10 [ 2030.243173] ? get_smb2_cmd_val+0xe3/0x1c0 [ 2030.243208] handle_ksmbd_work+0x954/0x1280 [ 2030.243230] ? __pfx_handle_ksmbd_work+0x10/0x10 [ 2030.243249] ? process_scheduled_works+0xa07/0x1490 [ 2030.243270] ? process_scheduled_works+0xa07/0x1490 [ 2030.243291] process_scheduled_works+0xa70/0x1490 [ 2030.243320] ? __pfx_process_scheduled_works+0x10/0x10 [ 2030.243340] ? do_raw_spin_lock+0x130/0x300 [ 2030.243358] ? lock_is_held_type+0x7b/0x110 [ 2030.243388] worker_thread+0x932/0xe20 [ 2030.243415] kthread+0x38a/0x470 [ 2030.243431] ? __pfx_worker_thread+0x10/0x10 [ 2030.243451] ? __pfx_kthread+0x10/0x10 [ 2030.243467] ret_from_fork+0x484/0x910 [ 2030.243485] ? __pfx_ret_from_fork+0x10/0x10 [ 2030.243501] ? __switch_to+0xc77/0x12c0 [ 2030.243523] ? __pfx_kthread+0x10/0x10 [ 2030.243540] ret_from_fork_asm+0x1a/0x30 [ 2030.243564] </TASK> [ 2030.243570] [ 2030.290164] Allocated by task 19279: [ 2030.290911] kasan_save_track+0x3e/0x80 [ 2030.292179] __kasan_kmalloc+0x72/0x90 [ 2030.293217] __kvmalloc_node_noprof+0x3ff/0x6b0 [ 2030.294467] handle_generic_event+0x59b/0x750 [ 2030.295345] genl_family_rcv_msg_doit+0x238/0x340 [ 2030.296553] genl_rcv_msg+0x606/0x7b0 [ 2030.297129] netlink_rcv_skb+0x22b/0x4a0 [ 2030.298500] genl_rcv+0x2d/0x40 [ 2030.299273] netlink_unicast+0x7ba/0x930 [ 2030.300019] netlink_sendmsg+0x8c3/0xb00 [ 2030.301073] __sock_sendmsg+0xec/0x140 [ 2030.301579] __sys_sendto+0x357/0x470 [ 2030.302255] __x64_sys_sendto+0xe3/0x100 [ 2030.303425] do_syscall_64+0x135/0x460 [ 2030.304763] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 2030.305594] [ 2030.305819] The buggy address belongs to the object at ffff888121bb6640 [ 2030.305819] which belongs to the cache kmalloc-192 of size 192 [ 2030.309595] The buggy address ---truncated---(CVE-2026-90174)
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate orphan slot during inode read
Patch series "ocfs2: validate active orphan slots during inode read".
OCFS2 trusts active ordinary and append-DIO orphan slots read from dinodes. A corrupted slot can therefore index osb_orphan_wipes or the slot-local system-inode cache outside their allocations before the corruption is reported.
Patch 1 validates the ordinary orphan slot used by inode wipe processing. Patch 2 validates the append-DIO orphan slot used by DIO completion and orphan recovery. Both checks reject corrupt metadata at the existing inode validation boundary.
This patch (of 2):
[BUG] A corrupted dinode with OCFS2_ORPHANED_FL can carry an i_orphaned_slot outside the mounted filesystem slot range. ocfs2_wipe_inode() uses it to index osb_orphan_wipes before looking up the orphan directory, causing an out-of-bounds memory access.
BUG: KASAN: slab-use-after-free in ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 Read of size 8 at addr ffff88800b767c00 by task kworker/u8:3/85 Call Trace: ... ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102 ocfs2_wipe_inode+0x292/0xf70 fs/ocfs2/inode.c:840 ocfs2_delete_inode fs/ocfs2/inode.c:1155 [inline] ocfs2_evict_inode+0x6c9/0x1170 fs/ocfs2/inode.c:1295 evict+0x38e/0x8f0 fs/inode.c:810 iput_final fs/inode.c:1914 [inline] iput fs/inode.c:1966 [inline] iput+0x55b/0x8b0 fs/inode.c:1926 ocfs2_recover_orphans+0x610/0xe40 fs/ocfs2/journal.c:2374 ocfs2_complete_recovery+0x5af/0xd00 fs/ocfs2/journal.c:1373 ...
[CAUSE] ocfs2_validate_inode_block() validates i_suballoc_slot but leaves the active ordinary orphan slot unchecked. Downstream consumers assume that the value is smaller than osb->max_slots.
[FIX] Reject an active i_orphaned_slot outside the slot range during dinode validation, before the inode reaches orphan wipe processing.(CVE-2026-90205)
In the Linux kernel, the following vulnerability has been resolved:
firmware: coreboot: Validate table bounds
The existing coreboot_table_populate() bounds checks limit individual entries to the mapped length. However, coreboot_table_probe() replaces the platform resource length with header and table sizes supplied by firmware before mapping the full table.
A malformed table can overflow the 32-bit size addition or advertise an extent beyond the resource, causing the driver to map and parse memory outside the resource. A resource shorter than the fixed header is also mapped as though it contained a complete header.
Reject resources shorter than the fixed header. After validating the signature, require a complete header, calculate the advertised extent with overflow checking, and reject extents beyond the resource before remapping the table.(CVE-2026-90341)
In the Linux kernel, the following vulnerability has been resolved:
power: supply: sc2731_charger: cancel work on remove
The USB notifier and initial charger detection can schedule info->work. The remove path unregisters the notifier, but does not cancel queued or running work before the devm-allocated driver data is released.
Set the platform drvdata used by remove, then cancel the work after unregistering the notifier.
This issue was found by a static analysis tool.(CVE-2026-90394)
In the Linux kernel, the following vulnerability has been resolved:
vhost-scsi: flush backend after device ioctls
vhost-scsi translates guest response descriptors into userspace iovecs when commands are submitted. Target-core completes those commands asynchronously, so VHOST_SET_MEM_TABLE can replace the memory table while an in-flight command still retains response iovecs translated through the old table.
If the old mapping is reused after VHOST_SET_MEM_TABLE returns, command completion can write the response to an unrelated userspace object.
Flush the vhost-scsi backend after vhost_dev_ioctl() handles a device ioctl. This waits for in-flight commands that can still use the old response iovecs before the ioctl returns.(CVE-2026-93782)
In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject userspace cifs.idmap descriptions
cifs.idmap key descriptions carry authority-bearing fields (owner and group SIDs and uid/gid values in "os:"/"gs:"/"oi:"/"gi:" form) that the cifs.idmap upcall helper treats as kernel-originating inputs. Unlike its sibling cifs.spnego, the cifs.idmap key type has no vet_description hook, so userspace can create keys of this type through request_key(2)/add_key(2) and supply those fields without CIFS origin. A request_key(2) call with a non-NULL callout then drives a root usermodehelper upcall (/sbin/request-key -> cifs.idmap) that consumes the unvetted description in root context.
Only accept cifs.idmap descriptions while CIFS is using its private root_cred to request the key. id_to_sid()/sid_to_id() already run under override_creds(root_cred), so the kernel-originated path is unaffected.
This mirrors commit 3da1fdf4efbc ("smb: client: reject userspace cifs.spnego descriptions"), which applied the same restriction to cifs.spnego.(CVE-2026-97564)
In the Linux kernel, the following vulnerability has been resolved:
iio: accel: kxcjk-1013: reject duplicate event disable
The IIO core does not filter duplicate writes to the event enable attribute. kxcjk1013_write_event_config() already ignores repeated enable requests, but a repeated disable request still calls kxcjk1013_set_power_state(data, false), dropping a runtime PM reference that was not acquired for this request. This can underflow the runtime PM usage count and trigger a "Runtime PM usage count underflow" warning.
Return early when the requested state already matches ev_enable_state.(CVE-2026-98679)
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: set info->band for 802.3 encap offload frames
Unlike the 802.11 TX paths, ieee80211_8023_xmit() does not set info->band from the channel context on non-MLD interfaces. It stays at 0, so ieee80211_get_tx_rates() uses the wrong band for these frames.
Set it the same way as ieee80211_build_hdr(): drop the frame if there is no channel context, and leave the band at 0 on MLD interfaces.(CVE-2026-98700)
In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: cadence: Initialize IRQ state before requesting IRQ
The Cadence NAND interrupt handler uses both the IRQ lock and completion object. Registering the IRQ before initializing them leaves a window in which a pending interrupt can access uninitialized synchronization state.
Initialize them before registering the handler.(CVE-2026-98721)
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: fix buffer over-read in btintel_hw_error()
The "Exception info %s" print uses skb->data + 1, but the 12-byte payload is not guaranteed to be NUL-terminated and can be read past its end.
Bound the print with "%.*s" and skb->len - 1.(CVE-2026-98732)
In the Linux kernel, the following vulnerability has been resolved:
net: cpsw_new: unregister devlink on port registration failure
cpsw_probe() registers devlink before registering the CPSW ports.
If cpsw_register_ports() fails, the error path only unregisters the notifiers and then releases the lower level resources. It does not undo the successful cpsw_register_devlink() call, leaving the devlink instance and its parameters registered after probe has failed.
Add a devlink cleanup label for the path where devlink registration has already succeeded, and use it when port registration fails.(CVE-2026-98909)
In the Linux kernel, the following vulnerability has been resolved:
keys: Protect the type name while describing a key
keyctl_describe_key() must keep the key type's name alive until kasprintf() has consumed it. The retained key reference keeps the key and its description alive, but does not pin the module providing its type. The name is passed to kasprintf() without holding key->sem.
kvasprintf() uses the saved name pointer in two formatting passes, with a GFP_KERNEL allocation between them. With AF_RXRPC=m, a task that passes View permission before type retirement can overlap a privileged module unload in this order:
Hold key->sem for reading across kasprintf(). The collector then cannot retype the key or complete retirement until both formatting passes have finished. If retirement wins the lock first, formatting uses the core key_type_dead name instead. Release the semaphore immediately after kasprintf(), including on allocation failure, before copying to userspace.
Oops report as below:
BUG: unable to handle page fault for address: fffffbfff8054794
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
RIP: 0010:string+0x23f/0x470
Call Trace:
vsnprintf+0x330/0x1110(CVE-2026-99224)
{
"severity": "Critical"
}{
"aarch64": [
"bpftool-5.10.0-342.0.0.243.oe2203sp4.aarch64.rpm",
"bpftool-debuginfo-5.10.0-342.0.0.243.oe2203sp4.aarch64.rpm",
"kernel-5.10.0-342.0.0.243.oe2203sp4.aarch64.rpm",
"kernel-debuginfo-5.10.0-342.0.0.243.oe2203sp4.aarch64.rpm",
"kernel-debugsource-5.10.0-342.0.0.243.oe2203sp4.aarch64.rpm",
"kernel-devel-5.10.0-342.0.0.243.oe2203sp4.aarch64.rpm",
"kernel-headers-5.10.0-342.0.0.243.oe2203sp4.aarch64.rpm",
"kernel-source-5.10.0-342.0.0.243.oe2203sp4.aarch64.rpm",
"kernel-tools-5.10.0-342.0.0.243.oe2203sp4.aarch64.rpm",
"kernel-tools-debuginfo-5.10.0-342.0.0.243.oe2203sp4.aarch64.rpm",
"kernel-tools-devel-5.10.0-342.0.0.243.oe2203sp4.aarch64.rpm",
"perf-5.10.0-342.0.0.243.oe2203sp4.aarch64.rpm",
"perf-debuginfo-5.10.0-342.0.0.243.oe2203sp4.aarch64.rpm",
"python3-perf-5.10.0-342.0.0.243.oe2203sp4.aarch64.rpm",
"python3-perf-debuginfo-5.10.0-342.0.0.243.oe2203sp4.aarch64.rpm"
],
"src": [
"kernel-5.10.0-342.0.0.243.oe2203sp4.src.rpm"
],
"x86_64": [
"bpftool-5.10.0-342.0.0.243.oe2203sp4.x86_64.rpm",
"bpftool-debuginfo-5.10.0-342.0.0.243.oe2203sp4.x86_64.rpm",
"kernel-5.10.0-342.0.0.243.oe2203sp4.x86_64.rpm",
"kernel-debuginfo-5.10.0-342.0.0.243.oe2203sp4.x86_64.rpm",
"kernel-debugsource-5.10.0-342.0.0.243.oe2203sp4.x86_64.rpm",
"kernel-devel-5.10.0-342.0.0.243.oe2203sp4.x86_64.rpm",
"kernel-headers-5.10.0-342.0.0.243.oe2203sp4.x86_64.rpm",
"kernel-source-5.10.0-342.0.0.243.oe2203sp4.x86_64.rpm",
"kernel-tools-5.10.0-342.0.0.243.oe2203sp4.x86_64.rpm",
"kernel-tools-debuginfo-5.10.0-342.0.0.243.oe2203sp4.x86_64.rpm",
"kernel-tools-devel-5.10.0-342.0.0.243.oe2203sp4.x86_64.rpm",
"perf-5.10.0-342.0.0.243.oe2203sp4.x86_64.rpm",
"perf-debuginfo-5.10.0-342.0.0.243.oe2203sp4.x86_64.rpm",
"python3-perf-5.10.0-342.0.0.243.oe2203sp4.x86_64.rpm",
"python3-perf-debuginfo-5.10.0-342.0.0.243.oe2203sp4.x86_64.rpm"
]
}