SUSE-SU-2018:2223-1

The SUSE Linux Enterprise 15 kernel was updated to receive various security and bugfixes.

The following security bugs were fixed:

CVE-2018-5390 aka SegmentSmack: A remote attacker even with relatively low bandwidth could have caused lots of CPU usage by triggering the worst case scenario during IP and/or TCP fragment reassembly (bsc#1102340) CVE-2017-18344: The timer_create syscall implementation didn't properly validate input, which could have lead to out-of-bounds access. This allowed userspace applications to read arbitrary kernel memory in some setups. (bsc#1102851)

The following non-security bugs were fixed:

• acpi, apei, einj: Subtract any matching Register Region from Trigger resources (bsc#1051510).
• acpi, nfit: Fix scrub idle detection (bsc#1094119).
• acpi/nfit: fix cmdrc for acpinfit_ctl to always return a value (bsc#1051510).
• acpi/processor: Finish making acpiprocessorppchaschanged() void (bsc#1051510).
• ahci: Disable Lpm on Lenovo 50 series laptops with a too old BIOS (bsc#1051510).
• alsa: hda - Handle pm failure during hotplug (bsc#1051510).
• alsa: hda/realtek - Add Panasonic CF-SZ6 headset jack quirk (bsc#1051510).
• alsa: hda/realtek - Yet another Clevo P950 quirk entry (bsc#1101143).
• alsa: hda/realtek - two more lenovo models need fixup of MIC_LOCATION (bsc#1051510).
• alsa: hda: add mute led support for HP ProBook 455 G5 (bsc#1051510).
• alsa: rawmidi: Change resized buffers atomically (bsc#1051510).
• alx: take rtnl before calling _alxopen from resume (bsc#1051510).
• arm64: kpti: Use early_param for kpti= command-line option (bsc#1103220).
• arm: module: fix modsign build error (bsc#1093666).
• asoc: mediatek: preallocate pages use platform device (bsc#1051510).
• ath9khtc: Add a sanity check in ath9khtcampduaction() (bsc#1051510).
• atl1c: reserve min skb headroom (bsc#1051510).
• audit: Fix wrong task in comparison of session ID (bsc#1051510).
• audit: ensure that 'audit=1' actually enables audit for PID 1 (bsc#1051510).
• audit: return on memory error to avoid null pointer dereference (bsc#1051510).
• b44: Initialize 64-bit stats seqcount (bsc#1051510).
• backlight: as3711_bl: Fix Device Tree node leaks (bsc#1051510).
• backlight: lm3630a: Bump REG_MAX value to 0x50 instead of 0x1F (bsc#1051510).
• batman-adv: Accept only filled wifi station info (bsc#1051510).
• batman-adv: Always initialize fragment header priority (bsc#1051510).
• batman-adv: Avoid race in TT TVLV allocator helper (bsc#1051510).
• batman-adv: Avoid storing non-TT-sync flags on singular entries too (bsc#1051510).
• batman-adv: Fix TT sync flags for intermediate TT responses (bsc#1051510).
• batman-adv: Fix batogmiv best gw refcnt after netlink dump (bsc#1051510).
• batman-adv: Fix bat_v best gw refcnt after netlink dump (bsc#1051510).
• batman-adv: Fix check of retrieved origgw in batadvvgwis_eligible (bsc#1051510).
• batman-adv: Fix debugfs path for renamed hardif (bsc#1051510).
• batman-adv: Fix debugfs path for renamed softif (bsc#1051510).
• batman-adv: Fix internal interface indices types (bsc#1051510).
• batman-adv: Fix lock for ogm cnt access in batadvivogmcalctq (bsc#1051510).
• batman-adv: Fix multicast packet loss with a single WANTALLIPV4/6 flag (bsc#1051510).
• batman-adv: Fix netlink dumping of BLA backbones (bsc#1051510).
• batman-adv: Fix netlink dumping of BLA claims (bsc#1051510).
• batman-adv: Fix skbuff rcsum on packet reroute (bsc#1051510).
• batman-adv: Ignore invalid batadvivgw during netlink send (bsc#1051510).
• batman-adv: Ignore invalid batadvvgw during netlink send (bsc#1051510).
• batman-adv: Use default throughput value on cfg80211 error (bsc#1051510).
• batman-adv: fix TT sync flag inconsistencies (bsc#1051510).
• batman-adv: fix header size check in batadvdbgarp() (bsc#1051510).
• batman-adv: fix multicast-via-unicast transmission with AP isolation (bsc#1051510).
• batman-adv: fix packet checksum in receive path (bsc#1051510).
• batman-adv: fix packet loss for broadcasted DHCP packets to a server (bsc#1051510).
• batman-adv: invalidate checksum on fragment reassembly (bsc#1051510).
• batman-adv: update data pointers after skb_cow() (bsc#1051510).
• blk-mq: count allocated but not started requests in iostats inflight (bsc#1077989).
• blk-mq: fix sysfs inflight counter (bsc#1077989).
• block: always set partition number to '0' in blkpartitionremap() (bsc#1054245).
• block: always set partition number to '0' in blkpartitionremap() (bsc#1077989).
• block: biocheckeod() needs to consider partitions (bsc#1077989).
• block: fail opiswrite() requests to read-only partitions (bsc#1077989).
• block: pass 'runqueue' to blkmqrequestbypass_insert (bsc#1077989).
• block: set request_list for request (bsc#1077989).
• bluetooth: avoid recursive locking in hcisendto_channel() (bsc#1051510).
• bluetooth: hci_ll: Add support for the external clock (bsc#1051510).
• bluetooth: hcill: Fix downloadfirmware() return when _hcicmd_sync fails (bsc#1051510).
• bluetooth: hcinokia: select BTHCIUART_H4 (bsc#1051510).
• bluetooth: hci_uart: fix kconfig dependency (bsc#1051510).
• bnxten: Always set output parameters in bnxtgetmaxrings() (bsc#1050242).
• bnxten: Always set output parameters in bnxtgetmaxrings() (bsc#1050242).
• bnxt_en: Do not modify max IRQ count after rdma driver requests/frees IRQs (bsc#1050242).
• bnxt_en: Do not modify max IRQ count after rdma driver requests/frees IRQs (bsc#1050242).
• bnxten: Fix for system hang if requestirq fails (bsc#1050242).
• bnxten: Fix for system hang if requestirq fails (bsc#1050242).
• bnxten: Fix inconsistent BNXTFLAGAGGRINGS logic (bsc#1050242).
• bnxten: Fix inconsistent BNXTFLAGAGGRINGS logic (bsc#1050242).
• bnxten: Fix the vlantci exact match check (bsc#1050242).
• bnxten: Fix the vlantci exact match check (bsc#1050242).
• bonding: re-evaluate forceprimary when the primary slave name changes (networking-stable-1806_20).
• btrfs: Do not remove block group still has pinned down bytes (bsc#1086457).
• bus: arm-cci: Fix use of smpprocessorid() in preemptible context (bsc#1051510).
• bus: arm-ccn: Check memory allocation failure (bsc#1051510).
• bus: arm-ccn: Fix use of smpprocessorid() in preemptible context (bsc#1051510).
• bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left (bsc#1051510).
• can: bcm: check for null sk before deferencing it via the call to sock_net (bsc#1051510).
• can: m_can.c: fix setup of CCCR register: clear CCCR NISO bit before checking can.ctrlmode (bsc#1051510).
• can: mpc5xxxcan: check ofiomap return before use (bsc#1051510).
• can: peak_canfd: fix firmware v3.3.0: limit allocation to 32-bit DMA addr only (bsc#1051510).
• can: xilinx_can: fix RX loop if RXNEMP is asserted without RXOK (bsc#1051510).
• can: xilinx_can: fix RX overflow interrupt not being enabled (bsc#1051510).
• can: xilinx_can: fix device dropping off bus on RX overrun (bsc#1051510).
• can: xilinx_can: fix incorrect clear of non-processed interrupts (bsc#1051510).
• can: xilinx_can: fix power management handling (bsc#1051510).
• can: xilinx_can: fix recovery from error states not being propagated (bsc#1051510).
• can: xilinx_can: keep only 1-2 frames in TX FIFO to fix TX accounting (bsc#1051510).
• cdcncm: avoid padding beyond end of skb (networking-stable-1806_20).
• cfg80211: initialize sinfo in cfg80211getstation (bsc#1051510).
• checkpatch: add 6 missing types to --list-types (bsc#1051510).
• cifs: Fix infinite loop when using hard mount option (bsc#1091171).
• cifs: do not allow creating sockets except with SMB1 posix exensions (bsc#1102097).
• clk: Do not show the incorrect clock phase (bsc#1051510).
• clk: Do not write error code into divider register (bsc#1051510).
• clk: Fix _setclk_rates error print-string (bsc#1051510).
• clk: at91: PLL recalc_rate() now using cached MUL and DIV values (bsc#1051510).
• clk: at91: fix clk-generated parenting (bsc#1051510).
• clk: axi-clkgen: Correctly handle nocount bit in recalc_rate() (bsc#1051510).
• clk: bcm2835: De-assert/assert PLL reset signal when appropriate (bsc#1051510).
• clk: fix false-positive Wmaybe-uninitialized warning (bsc#1051510).
• clk: fix mux clock documentation (bsc#1051510).
• clk: fix setraterange when current rate is out of range (bsc#1051510).
• clk: hi3660: fix incorrect uart3 clock freqency (bsc#1051510).
• clk: hi6220: change watchdog clock source (bsc#1051510).
• clk: hi6220: mark clock csatbsyspll as critical (bsc#1051510).
• clk: hisilicon: fix potential NULL dereference in hisiclkalloc() (bsc#1051510).
• clk: hisilicon: mark wdtmuxp[] as const (bsc#1051510).
• clk: honor CLKMUXROUND_CLOSEST in generic clk mux (bsc#1051510).
• clk: imx6: refine hdmi_isfr's parent to make HDMI work on i.MX6 SoCs w/o VPU (bsc#1051510).
• clk: imx7d: fix mipi dphy div parent (bsc#1051510).
• clk: mediatek: add the option for determining PLL source clock (bsc#1051510).
• clk: mediatek: mark mtkinfrasysinitearly _init (bsc#1051510).
• clk: meson: gxbb: fix clkmclki958 divider flags (bsc#1051510).
• clk: meson: gxbb: fix meson cts_amclk divider flags (bsc#1051510).
• clk: meson: gxbb: fix wrong clock for SARADC/SANA (bsc#1051510).
• clk: meson: meson8b: fix protection against undefined clks (bsc#1051510).
• clk: meson: mpll: fix mpll0 fractional part ignored (bsc#1051510).
• clk: meson: mpll: use 64-bit maths in paramsfromrate (bsc#1051510).
• clk: meson: remove unnecessary rounding in the pll clock (bsc#1051510).
• clk: mvebu: use correct bit for 98DX3236 NAND (bsc#1051510).
• clk: qcom: Base rcg parent rate off plan frequency (bsc#1051510).
• clk: qcom: clk-smd-rpm: Fix the reported rate of branches (bsc#1051510).
• clk: qcom: common: fix legacy board-clock registration (bsc#1051510).
• clk: qcom: msm8916: Fix bimc gpu clock ops (bsc#1051510).
• clk: qcom: msm8916: fix mndwidth for codecdigcodec (bsc#1051510).
• clk: renesas: div6: Document fields used for parent selection (bsc#1051510).
• clk: renesas: r8a7745: Remove PLL configs for MD19=0 (bsc#1051510).
• clk: renesas: r8a7745: Remove nonexisting scu-src[0789] clocks (bsc#1051510).
• clk: renesas: r8a7795: Correct pwm, gpio, and i2c parent clocks on ES2.0 (bsc#1051510).
• clk: renesas: rcar-gen2: Fix PLL0 on R-Car V2H and E2 (bsc#1051510).
• clk: rockchip: Fix wrong parent for SDMMC phase clock for rk3228 (bsc#1051510).
• clk: rockchip: Prevent calculating mmc phase if clock rate is zero (bsc#1051510).
• clk: samsung: Fix m2m scaler clock on Exynos542x (bsc#1051510).
• clk: samsung: exynos3250: Fix PLL rates (bsc#1051510).
• clk: samsung: exynos5250: Add missing clocks for FIMC LITE SYSMMU devices (bsc#1051510).
• clk: samsung: exynos5250: Fix PLL rates (bsc#1051510).
• clk: samsung: exynos5260: Fix PLL rates (bsc#1051510).
• clk: samsung: exynos5433: Fix PLL rates (bsc#1051510).
• clk: samsung: exynos7: Fix PLL rates (bsc#1051510).
• clk: samsung: s3c2410: Fix PLL rates (bsc#1051510).
• clk: scpi: error when clock fails to register (bsc#1051510).
• clk: scpi: fix return type of _scpidvfsroundrate (bsc#1051510).
• clk: si5351: Rename internal plls to avoid name collisions (bsc#1051510).
• clk: si5351: fix PLL reset (bsc#1051510).
• clk: socfpga: Fix the smplsel on Arria10 and Stratix10 (bsc#1051510).
• clk: sunxi-ng: Fix fractional mode for N-M clocks (bsc#1051510).
• clk: sunxi-ng: Make fractional helper less chatty (bsc#1051510).
• clk: sunxi-ng: Wait for lock when using fractional mode (bsc#1051510).
• clk: sunxi-ng: a31: Fix CLKOUT* clock ops (bsc#1051510).
• clk: sunxi-ng: add CLKSETRATE_PARENT flag to H3 GPU clock (bsc#1051510).
• clk: sunxi-ng: add CLKSETRATE_UNGATE to all H3 PLLs (bsc#1051510).
• clk: sunxi-ng: allow set parent clock (PLL_CPUX) for CPUX clock on H3 (bsc#1051510).
• clk: sunxi-ng: h3: gate then ungate PLL CPU clk after rate change (bsc#1051510).
• clk: sunxi-ng: multiplier: Fix fractional mode (bsc#1051510).
• clk: sunxi-ng: nm: Check if requested rate is supported by fractional clock (bsc#1051510).
• clk: sunxi-ng: sun5i: Fix bit offset of audio PLL post-divider (bsc#1051510).
• clk: sunxi-ng: sun6i: Export video PLLs (bsc#1051510).
• clk: sunxi-ng: sun6i: Rename HDMI DDC clock to avoid name collision (bsc#1051510).
• clk: sunxi: fix build warning (bsc#1051510).
• clk: sunxi: fix uninitialized access (bsc#1051510).
• clk: tegra: Fix cclk_lp divisor register (bsc#1051510).
• clk: tegra: Fix pll_u rate configuration (bsc#1051510).
• clk: tegra: Use readlrelaxedpolltimeoutatomic() in tegra210clockinit() (bsc#1051510).
• clk: ti: dra7-atl-clock: fix child-node lookups (bsc#1051510).
• clk: uniphier: fix DAPLL2 clock rate of Pro5 (bsc#1051510).
• clk: x86: Do not gate clocks enabled by the firmware (bsc#1051510).
• clockevents/drivers/cs5535: Improve resilience to spurious interrupts (bsc#1051510).
• clocksource/drivers/stm32: Fix kernel panic with multiple timers (bsc#1051510).
• cnic: Fix an error handling path in 'cnicallocbnx2x_resc()' (bsc#1086324).
• cnic: Fix an error handling path in 'cnicallocbnx2x_resc()' (bsc#1086324).
• cpufreq: CPPC: Initialize shared perf capabilities of CPUs (bsc#1100884).
• cpufreq: Fix new policy initialization during limits updates via sysfs (bsc#1100884).
• cpufreq: cppccpufreq: Fix cppccpufreq_init() failure path (bsc#1100884).
• cpufreq: docs: Add missing cpuinfocurfreq description (bsc#1051510).
• cpufreq: docs: Drop intel-pstate.txt from index.txt (bsc#1051510).
• cpufreq: governors: Fix long idle detection logic in load calculation (bsc#1100884).
• cpufreq: powernv: Fix hardlockup due to synchronous smp_call in timer interrupt (bsc#1100884).
• cpuidle: powernv: Fix promotion from snooze if next state disabled (bsc#1100884).
• crashdump: iskdump_kernel can be boolean (bsc#1103230).
• crypto: caam/qi - explicitly set dma_ops (bsc#1051510).
• crypto: ccp - remove unused variable qim (bsc#1051510).
• crypto: change transient busy return code to -ENOSPC (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• crypto: chelsio - Add authenc versions of ctr and sha (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• crypto: chelsio - Check error code with IS_ERR macro (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• crypto: chelsio - Fix IV updated in XTS operation (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• crypto: chelsio - Fix Indentation (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• crypto: chelsio - Fix an error code in chcrhashdma_map() (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• crypto: chelsio - Fix indentation warning (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• crypto: chelsio - Fix iv passed in fallback path for rfc3686 (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• crypto: chelsio - Fix src buffer dma length (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• crypto: chelsio - Make function aeadccmvalidate_input static (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• crypto: chelsio - Move DMA un/mapping to chcr from lld cxgb4 driver (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• crypto: chelsio - Remove allocation of sg list to implement 2K limit of dsgl header (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• crypto: chelsio - Remove dst sg size zero check (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• crypto: chelsio - Remove unused parameter (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• crypto: chelsio - Update IV before sending request to HW (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• crypto: chelsio - Use kernel round function to align lengths (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• crypto: chelsio - Use x8_ble gf multiplication to calculate IV (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• crypto: chelsio - check for sg null (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• crypto: chelsio - do not leak pointers to authenc keys (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• crypto: crypto4xx - fix crypto4xxbuildpdr, crypto4xxbuildsdr leak (bsc#1051510).
• crypto: crypto4xx - remove bad list_del (bsc#1051510).
• crypto: gf128mul - The x8_ble multiplication functions (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• crypto: sha512-mb - add some missing unlock on error (bsc#1051510).
• cxgb4/cxgb4vf: Notify link changes to OS-dependent code (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4/cxgb4vf: add support for ndosetvf_vlan (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4/cxgb4vf: check fw caps to set link mode mask (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4/cxgb4vf: link management changes for new SFP (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: Add FORCE_PAUSE bit to 32 bit port caps (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: Add HMA support (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: Add TP Congestion map entry for single-port (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: Add new T5 device id (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: Add new T6 device ids (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: Add support for ethtool i2c dump (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: Add support to initialise/read SRQ entries (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: Add support to query HW SRQ parameters (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: Adds CPL support for Shared Receive Queues (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: Check alignment constraint for T6 (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: Check for kvzalloc allocation failure (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: Fix error handling path in 'init_one()' (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: Fix queue free path of ULD drivers (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: Fix {vxlan/geneve}_port initialization (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: IPv6 filter takes 2 tids (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: Setup FW queues before registering netdev (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: Support firmware rdma write completion work request (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: Support firmware rdma write with immediate work request (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: add new T5 device id's (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: avoid schedule while atomic (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: change the port capability bits definition (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: clean up init_one (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: collect SGE PF/VF queue map (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: collect hardware dump in second kernel (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: copy adap index to PF0-3 adapter instances (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: copy mbox log size to PF0-3 adap instances (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: copy the length of cpltxpktcore to fwwr (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: copy vlanid in ndogetvfconfig (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: depend on firmware event for link status (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: do L1 config when module is inserted (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: do not display 50Gbps as unsupported speed (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: do not fail vf instatiation in slave mode (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: do not set needsfreenetdev for mgmt dev's (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: enable ZLib_DEFLATE when building cxgb4 (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: enable inner header checksum calculation (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: fix the wrong conversion of Mbps to Kbps (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: free up resources of pf 0-3 (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: increase max tx rate limit to 100 Gbps (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: notify fatal error to uld drivers (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: remove dead code when allocating filter (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: restructure VF mgmt code (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: rework on-chip memory read (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: support new ISSI flash parts (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: update LE-TCAM collection for T6 (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: update dump collection logic to use compression (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: update latest firmware version supported (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: update latest firmware version supported (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: use CLIP with LIP6 on T6 for TCAM filters (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: use zlib deflate to compress firmware dump (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4: zero the HMA memory (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4vf: Forcefully link up virtual interfaces (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgb4vf: display pause settings (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• cxgbit: call neigheventsend() to update MAC address (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• dccp: do not free ccid2hctxsock struct in dccpdisconnect() (networking-stable-180608).
• device property: Allow iterating over available child fwnodes (bsc#1098633).
• device property: Introduce fwnodecallbool_op() for ops that return bool (bsc#1098633).
• device property: Introduce fwnodedeviceis_available() (bsc#1098633).
• device property: Introduce fwnodegetmac_address() (bsc#1098633).
• device property: Introduce fwnodegetphy_mode() (bsc#1098633).
• device property: Introduce fwnodeirqget() (bsc#1098633).
• device property: Move FW type specific functionality to FW specific files (bsc#1098633).
• device property: Move fwnode graph ops to firmware specific locations (bsc#1098633).
• device property: preserve usecount for node passed to offwnodegraphgetport_parent() (bsc#1098633).
• dmaengine: fsl-edma: disable clks on all error paths (bsc#1051510).
• dmaengine: k3dma: Off by one in k3ofdmasimplexlate() (bsc#1051510).
• dmaengine: mvxorv2: Fix clock resource by adding a register clock (bsc#1051510).
• dmaengine: omap-dma: port_window support correction for both direction (bsc#1051510).
• dmaengine: pl330: fix a race condition in case of threaded irqs (bsc#1051510).
• dmaengine: pl330: report BURST residue granularity (bsc#1051510).
• dmaengine: qcom: bam_dma: get num-channels and num-ees from dt (bsc#1051510).
• dmaengine: qcom_hidma: check pending interrupts (bsc#1051510).
• dmaengine: rcar-dmac: Check the done lists in rcardmacchangetresidue() (bsc#1051510).
• dmaengine: rcar-dmac: fix maxchunksize for R-Car Gen3 (bsc#1051510).
• dmaengine: tegra-apb: Really fix runtime-pm usage (bsc#1051510).
• dmaengine: tegra210-adma: fix ofirqget() error check (bsc#1051510).
• dmaengine: xilinx_dma: Fix error code format specifier (bsc#1051510).
• dmaengine: zynqmp_dma: Fix race condition in the probe (bsc#1051510).
• doc: Rename .systemkeyring to .builtintrusted_keys (bsc#1051510).
• doc: SKBGSO[IPIP|SIT] have been replaced (bsc#1051510).
• docs-rst: fix broken links to dynamic-debug-howto in kernel-parameters (bsc#1051510).
• docs: segmentation-offloads.txt: Fix ref to SKBGSOTUNNEL_REMCSUM (bsc#1051510).
• docu: admin-guide: intel_pstate: Fix sysfs path (bsc#1051510).
• dp83640: Ensure against premature access to PHY registers after reset (bsc#1051510).
• drbd: fix access after free (bsc#1051510).
• driver core: Fix link to device power management documentation (bsc#1051510).
• driver core: Partially revert 'driver core: correct device's shutdown order' (bsc#1051510).
• drivers/firmware: pscichecker: Add missing destroytimeronstack() (bsc#1051510).
• drivers/net/ethernet/qlogic/qed: Fix _qedspq_block() ordering (bsc#1086314 bsc#1086313 bsc#1086301).
• drivers/net/ethernet/qlogic/qed: Fix _qedspq_block() ordering (bsc#1086314 bsc#1086313 bsc#1086301).
• drivers: net: i40evf: use setup_timer() helper (bsc#1101816).
• drivers: net: i40evf: use setup_timer() helper (bsc#1101816).
• drm/bridge/sii8620: fix potential buffer overflow (bsc#1051510).
• drm/exynos: Fix dma-buf import (bsc#1051510).
• drm/i915/dp: Send DPCD ON for MST before phy_up (bsc#1051510).
• drm/i915: Fix hotplug irq ack on i965/g4x (bsc#1051510).
• drm/i915: Only call taskletkill() on the first preparereset (bsc#1051510).
• drm/nouveau/drm/nouveau: Fix runtime pm leak in nv50dispatomic_commit() (bsc#1090888).
• drm/nouveau/gem: off by one bugs in nouveaugempushbufrelocapply() (bsc#1051510).
• drm/nouveau: Avoid looping through fake MST connectors (bsc#1051510).
• drm/nouveau: Use drmconnectorlistiter* for iterating connectors (bsc#1051510).
• drm/rockchip: Fix build warning in analogix_dp-rockchip.c (bsc#1085536).
• drm/rockchip: analogix_dp: Remove unnecessary init code (bsc#1085536).
• drm/rockchip: dw_hdmi: Move HDMI vpll clock enable to bind() (bsc#1087092).
• drm/rockchip: inno_hdmi: Fix error handling path (bsc#1087092).
• drm/rockchip: innohdmi: reorder clkdisable_unprepare call in unbind (bsc#1087092).
• drm/tegra: Acquire a reference to the IOVA cache (bsc#1090888).
• drm/udl: fix display corruption of the last line (bsc#1101337).
• drm: Use kvzalloc for allocating blob property memory (bsc#1101352).
• drm: mali-dp: Uninitialized variable in malidpsecheck_scaling() (bsc#1087092).
• drm: rcar-du: Remove zpos field from rcarduvspplanestate structure (bsc#1085539).
• drm: rcar-du: lvds: Fix LVDCR1 for R-Car gen3 (bsc#1085539).
• dvb_frontend: do not use-after-free the frontend struct (bsc#1051510).
• efi/efitest: Prevent an Oops in efiruntimequerycapsulecaps() (bsc#1051510).
• enic: do not overwrite error code (bsc#1037697).
• enic: enable rq before updating rq descriptors (bsc#1037697).
• enic: set DMA mask to 47 bit (networking-stable-180608).
• ethtool: add ethtoolintersectlink_masks (bsc#1101816).
• ethtool: add ethtoolintersectlink_masks (bsc#1101816).
• firewire: net: max MTU off by one (bsc#1051510).
• firmware: armscpi: fix endianness of devid in struct devpstateset (bsc#1051510).
• firmware: dmi: Optimize dmi_matches (bsc#1051510).
• firmware: tegra: Fix locking bugs in BpmP (bsc#1051510).
• fix kabi due to perf_event.h uapi field change ().
• fm10k: Fix configuration for macvlan offload (bsc#1101813).
• fm10k: Fix configuration for macvlan offload (bsc#1101813).
• fm10k: Fix misuse of net_ratelimit() (bsc#1101813).
• fm10k: Fix misuse of net_ratelimit() (bsc#1101813).
• fm10k: Use seqputc() in fm10kdbgdescbreak() (bsc#1101813).
• fm10k: Use seqputc() in fm10kdbgdescbreak() (bsc#1101813).
• fm10k: add missing fall through comment (bsc#1101813).
• fm10k: add missing fall through comment (bsc#1101813).
• fm10k: avoid divide by zero in rare cases when device is resetting (bsc#1101813).
• fm10k: avoid divide by zero in rare cases when device is resetting (bsc#1101813).
• fm10k: avoid needless delay when loading driver (bsc#1101813).
• fm10k: avoid needless delay when loading driver (bsc#1101813).
• fm10k: avoid possible truncation of q_vector->name (bsc#1101813).
• fm10k: avoid possible truncation of q_vector->name (bsc#1101813).
• fm10k: bump version number (bsc#1101813).
• fm10k: bump version number (bsc#1101813).
• fm10k: bump version number (bsc#1101813).
• fm10k: bump version number (bsc#1101813).
• fm10k: clarify action when updating the VLAN table (bsc#1101813).
• fm10k: clarify action when updating the VLAN table (bsc#1101813).
• fm10k: cleanup unnecessary parenthesis in fm10k_iov.c (bsc#1101813).
• fm10k: cleanup unnecessary parenthesis in fm10k_iov.c (bsc#1101813).
• fm10k: correct typo in fm10k_pf.c (bsc#1101813).
• fm10k: correct typo in fm10k_pf.c (bsc#1101813).
• fm10k: do not assume VLAN 1 is enabled (bsc#1101813).
• fm10k: do not assume VLAN 1 is enabled (bsc#1101813).
• fm10k: do not loop while resetting VFs due to VFLR event (bsc#1101813).
• fm10k: do not loop while resetting VFs due to VFLR event (bsc#1101813).
• fm10k: do not protect fm10kqueuemacrequest by fm10khostmbxready (bsc#1101813).
• fm10k: do not protect fm10kqueuemacrequest by fm10khostmbxready (bsc#1101813).
• fm10k: fix 'failed to kill vid' message for VF (bsc#1101813).
• fm10k: fix 'failed to kill vid' message for VF (bsc#1101813).
• fm10k: fix function doxygen comments (bsc#1101813).
• fm10k: fix function doxygen comments (bsc#1101813).
• fm10k: fix incorrect warning for function prototype (bsc#1101813).
• fm10k: fix incorrect warning for function prototype (bsc#1101813).
• fm10k: fix typos on fall through comments (bsc#1101813).
• fm10k: fix typos on fall through comments (bsc#1101813).
• fm10k: introduce a message queue for MAC/VLAN messages (bsc#1101813).
• fm10k: introduce a message queue for MAC/VLAN messages (bsc#1101813).
• fm10k: mark pm functions as _maybeunused (bsc#1101813).
• fm10k: mark pm functions as _maybeunused (bsc#1101813).
• fm10k: move fm10kprepareforreset and fm10khandle_reset (bsc#1101813).
• fm10k: move fm10kprepareforreset and fm10khandle_reset (bsc#1101813).
• fm10k: prefer %s and func for diagnostic prints (bsc#1101813).
• fm10k: prefer %s and func for diagnostic prints (bsc#1101813).
• fm10k: prepareforreset() when we lose pcie Link (bsc#1101813).
• fm10k: prepareforreset() when we lose pcie Link (bsc#1101813).
• fm10k: prevent race condition of _FM10KSERVICE_SCHED (bsc#1101813).
• fm10k: prevent race condition of _FM10KSERVICE_SCHED (bsc#1101813).
• fm10k: reduce duplicate fm10k_stat macro code (bsc#1101813).
• fm10k: reduce duplicate fm10k_stat macro code (bsc#1101813).
• fm10k: reschedule service event if we stall the PF<->SM mailbox (bsc#1101813).
• fm10k: reschedule service event if we stall the PF->SM mailbox (bsc#1101813).
• fm10k: setup VLANs for l2 accelerated macvlan interfaces (bsc#1101813).
• fm10k: setup VLANs for l2 accelerated macvlan interfaces (bsc#1101813).
• fm10k: simplify reading PFVFLRE register (bsc#1101813).
• fm10k: simplify reading PFVFLRE register (bsc#1101813).
• fm10k: stop adding VLAN 0 to the VLAN table (bsc#1101813).
• fm10k: stop adding VLAN 0 to the VLAN table (bsc#1101813).
• fm10k: stop spurious link down messages when Tx FIFO is full (bsc#1101813).
• fm10k: stop spurious link down messages when Tx FIFO is full (bsc#1101813).
• fm10k: use generic pm hooks instead of legacy pcie power hooks (bsc#1101813).
• fm10k: use generic pm hooks instead of legacy pcie power hooks (bsc#1101813).
• fm10k: use macro to avoid passing the array and size separately (bsc#1101813).
• fm10k: use macro to avoid passing the array and size separately (bsc#1101813).
• fm10k: use spinlock to implement mailbox lock (bsc#1101813).
• fm10k: use spinlock to implement mailbox lock (bsc#1101813).
• fm10k: use the MAC/VLAN queue for VF<->PF MAC/VLAN requests (bsc#1101813).
• fm10k: use the MAC/VLAN queue for VF->PF MAC/VLAN requests (bsc#1101813).
• fm10k: use variadic arguments to fm10kaddstat_strings (bsc#1101813).
• fm10k: use variadic arguments to fm10kaddstat_strings (bsc#1101813).
• fm10k: warn if the stat size is unknown (bsc#1101813).
• fm10k: warn if the stat size is unknown (bsc#1101813).
• fsi: core: register with postcore_initcall (bsc#1051510).
• fuse: Remove the buggy retranslation of pids in fusedevdo_read (bsc#1051510).
• fuse: atomicotrunc should truncate pagecache (bsc#1051510).
• fuse: do not keep dead fuseconn at fusefill_super() (bsc#1051510).
• fuse: fix congested state leak on aborted connections (bsc#1051510).
• fuse: fix control dir setup and teardown (bsc#1051510).
• gpio: acpi: work around false-positive -Wstring-overflow warning (bsc#1051510).
• gpio: brcmstb: allow all instances to be wakeup sources (bsc#1051510).
• gpio: brcmstb: check return value of gpiochipirqchipadd() (bsc#1051510).
• gpio: brcmstb: correct the configuration of level interrupts (bsc#1051510).
• gpio: brcmstb: release the bgpio lock during irq handlers (bsc#1051510).
• gpio: brcmstb: switch to handlelevelirq flow (bsc#1051510).
• gpio: pca953x: fix vendor prefix for PCA9654 (bsc#1051510).
• gpio: reject invalid gpio before getting gpio_desc (bsc#1051510).
• gpio: tegra: fix unbalanced chainedirqenter/exit (bsc#1051510).
• gpu: host1x: Acquire a reference to the IOVA cache (bsc#1090888).
• hwmon: (aspeed-pwm) add THERMAL dependency (bsc#1051510).
• hwmon: (ftsteutates) Fix clearing alarm sysfs entries (bsc#1051510).
• hwmon: (ltc2990) Fix incorrect conversion of negative temperatures (bsc#1051510).
• hwmon: (nct6683) Enable EC access if disabled at boot (bsc#1051510).
• hwmon: (stts751) buffer overrun on wrong chip configuration (bsc#1051510).
• hwmon: (tmp102) Fix first temperature reading (bsc#1051510).
• hwmon: Deal with errors from the thermal subsystem (bsc#1051510).
• hwrng: stm32 - add reset during probe (bsc#1051510).
• i2c: axxia: enable clock before calling clkgetrate() (bsc#1051510).
• i2c: designware: Round down ACPI provided clk to nearest supported clk (bsc#1051510).
• i2c: mux: pinctrl: mention correct module name in Kconfig help text (bsc#1051510).
• i2c: tegra: Fix NACK error handling (bsc#1051510).
• i40e/i40evf: Add support for new mechanism of updating adaptive ITR (bsc#1101816).
• i40e/i40evf: Add support for new mechanism of updating adaptive ITR (bsc#1101816).
• i40e/i40evf: Bump driver versions (bsc#1101816).
• i40e/i40evf: Bump driver versions (bsc#1101816).
• i40e/i40evf: Clean up logic for adaptive ITR (bsc#1101816).
• i40e/i40evf: Clean up logic for adaptive ITR (bsc#1101816).
• i40e/i40evf: Clean-up of bits related to using qvector->regidx (bsc#1101816).
• i40e/i40evf: Clean-up of bits related to using qvector->regidx (bsc#1101816).
• i40e/i40evf: Detect and recover hung queue scenario (bsc#1101816).
• i40e/i40evf: Detect and recover hung queue scenario (bsc#1101816).
• i40e/i40evf: Do not bother setting the CLEARPBA bit (bsc#1101816).
• i40e/i40evf: Do not bother setting the CLEARPBA bit (bsc#1101816).
• i40e/i40evf: Enable NVMUpdate to retrieve AdminQ and add preservation flags for NVM update (bsc#1101816).
• i40e/i40evf: Enable NVMUpdate to retrieve AdminQ and add preservation flags for NVM update (bsc#1101816).
• i40e/i40evf: Only track one ITR setting per ring instead of Tx/Rx (bsc#1101816).
• i40e/i40evf: Only track one ITR setting per ring instead of Tx/Rx (bsc#1101816).
• i40e/i40evf: Record ITR register location in the q_vector (bsc#1101816).
• i40e/i40evf: Record ITR register location in the q_vector (bsc#1101816).
• i40e/i40evf: Split container ITR into currentitr and targetitr (bsc#1101816).
• i40e/i40evf: Split container ITR into currentitr and targetitr (bsc#1101816).
• i40e/i40evf: Update DESC_NEEDED value to reflect larger value (bsc#1101816).
• i40e/i40evf: Update DESC_NEEDED value to reflect larger value (bsc#1101816).
• i40e/i40evf: Use ring pointers to clean up setitrperqueue (bsc#1101816).
• i40e/i40evf: Use ring pointers to clean up setitrperqueue (bsc#1101816).
• i40e/i40evf: Use usec value instead of reg value for ITR defines (bsc#1101816).
• i40e/i40evf: Use usec value instead of reg value for ITR defines (bsc#1101816).
• i40e/i40evf: always set the CLEARPBA flag when re-enabling interrupts (bsc#1101816).
• i40e/i40evf: always set the CLEARPBA flag when re-enabling interrupts (bsc#1101816).
• i40e/i40evf: bundle more descriptors when allocating buffers (bsc#1101816).
• i40e/i40evf: bundle more descriptors when allocating buffers (bsc#1101816).
• i40e/i40evf: cleanup incorrect function doxygen comments (bsc#1101816).
• i40e/i40evf: cleanup incorrect function doxygen comments (bsc#1101816).
• i40e/i40evf: do not trust VF to reset itself (bsc#1101816).
• i40e/i40evf: do not trust VF to reset itself (bsc#1101816).
• i40e/i40evf: fix incorrect default ITR values on driver load (bsc#1101816).
• i40e/i40evf: fix incorrect default ITR values on driver load (bsc#1101816).
• i40e/i40evf: organize and re-number feature flags (bsc#1101816).
• i40e/i40evf: organize and re-number feature flags (bsc#1101816).
• i40e/i40evf: rename bytesperint to bytesperusec (bsc#1101816).
• i40e/i40evf: rename bytesperint to bytesperusec (bsc#1101816).
• i40e/i40evf: use DECLARE_BITMAP for state (bsc#1101816).
• i40e/i40evf: use DECLARE_BITMAP for state (bsc#1101816).
• i40e/i40evf: use SW variables for hang detection (bsc#1101816).
• i40e/i40evf: use SW variables for hang detection (bsc#1101816).
• i40e/virtchnl: fix application of sizeof to pointer (bsc#1101816).
• i40e/virtchnl: fix application of sizeof to pointer (bsc#1101816).
• i40e: Add advertising 10G LR mode (bsc#1101816).
• i40e: Add advertising 10G LR mode (bsc#1101816).
• i40e: Add delay after EMP reset for firmware to recover (bsc#1101816).
• i40e: Add delay after EMP reset for firmware to recover (bsc#1101816).
• i40e: Add infrastructure for queue channel support (bsc#1101816).
• i40e: Add infrastructure for queue channel support (bsc#1101816).
• i40e: Add macro for PF reset bit (bsc#1101816).
• i40e: Add macro for PF reset bit (bsc#1101816).
• i40e: Add new PHY types for 25G AOC and ACC support (bsc#1101816).
• i40e: Add new PHY types for 25G AOC and ACC support (bsc#1101816).
• i40e: Add returning AQ critical error to SW (bsc#1101816).
• i40e: Add returning AQ critical error to SW (bsc#1101816).
• i40e: Add support for 'ethtool -m' (bsc#1101816).
• i40e: Add support for 'ethtool -m' (bsc#1101816).
• i40e: Cleanup i40evlanrx_register (bsc#1101816).
• i40e: Cleanup i40evlanrx_register (bsc#1101816).
• i40e: Delete an error message for a failed memory allocation in i40einitinterrupt_scheme() (bsc#1101816).
• i40e: Delete an error message for a failed memory allocation in i40einitinterrupt_scheme() (bsc#1101816).
• i40e: Disable iWARP VSI PETCP_ENA flag on netdev down events (bsc#1101816).
• i40e: Disable iWARP VSI PETCP_ENA flag on netdev down events (bsc#1101816).
• i40e: Display error message if module does not meet thermal requirements (bsc#1101816).
• i40e: Display error message if module does not meet thermal requirements (bsc#1101816).
• i40e: Enable VF to negotiate number of allocated queues (bsc#1101816).
• i40e: Enable VF to negotiate number of allocated queues (bsc#1101816).
• i40e: Fix FLR reset timeout issue (bsc#1101816).
• i40e: Fix FLR reset timeout issue (bsc#1101816).
• i40e: Fix a potential NULL pointer dereference (bsc#1101816).
• i40e: Fix a potential NULL pointer dereference (bsc#1101816).
• i40e: Fix for NUP NVM image downgrade failure (bsc#1101816).
• i40e: Fix for NUP NVM image downgrade failure (bsc#1101816).
• i40e: Fix for adding multiple ethtool filters on the same location (bsc#1101816).
• i40e: Fix for adding multiple ethtool filters on the same location (bsc#1101816).
• i40e: Fix for blinking activity instead of link LEDs (bsc#1101816).
• i40e: Fix for blinking activity instead of link LEDs (bsc#1101816).
• i40e: Fix kdump failure (bsc#1101816).
• i40e: Fix kdump failure (bsc#1101816).
• i40e: Fix link down message when interface is brought up (bsc#1101816).
• i40e: Fix link down message when interface is brought up (bsc#1101816).
• i40e: Fix multiple issues with UDP tunnel offload filter configuration (bsc#1101816).
• i40e: Fix multiple issues with UDP tunnel offload filter configuration (bsc#1101816).
• i40e: Fix permission check for VF MAC filters (bsc#1101816).
• i40e: Fix permission check for VF MAC filters (bsc#1101816).
• i40e: Fix recalculation of MSI-X vectors for VMDq (bsc#1101816).
• i40e: Fix recalculation of MSI-X vectors for VMDq (bsc#1101816).
• i40e: Fix reporting of supported link modes (bsc#1101816).
• i40e: Fix reporting of supported link modes (bsc#1101816).
• i40e: Fix the polling mechanism of GLGEN_RSTAT.DEVSTATE (bsc#1101816).
• i40e: Fix the polling mechanism of GLGEN_RSTAT.DEVSTATE (bsc#1101816).
• i40e: Fix unqualified module message while bringing link up (bsc#1101816).
• i40e: Fix unqualified module message while bringing link up (bsc#1101816).
• i40e: Prevent setting link speed on I40EDEVID25GB (bsc#1101816).
• i40e: Prevent setting link speed on I40EDEVID25GB (bsc#1101816).
• i40e: Prevent setting link speed on KX_X722 (bsc#1101816).
• i40e: Prevent setting link speed on KX_X722 (bsc#1101816).
• i40e: Properly maintain flow director filters list (bsc#1101816).
• i40e: Properly maintain flow director filters list (bsc#1101816).
• i40e: Remove limit of 64 max queues per channel (bsc#1101816).
• i40e: Remove limit of 64 max queues per channel (bsc#1101816).
• i40e: Retry AQC GetPhyAbilities to overcome I2CRead hangs (bsc#1101816).
• i40e: Retry AQC GetPhyAbilities to overcome I2CRead hangs (bsc#1101816).
• i40e: Stop dropping 802.1ad tags - eth proto 0x88a8 (bsc#1101816).
• i40e: Stop dropping 802.1ad tags - eth proto 0x88a8 (bsc#1101816).
• i40e: add check for return from findfirstbit call (bsc#1101816).
• i40e: add check for return from findfirstbit call (bsc#1101816).
• i40e: add doxygen comment for new mode parameter (bsc#1101816).
• i40e: add doxygen comment for new mode parameter (bsc#1101816).
• i40e: add function doc headers for ethtool stats functions (bsc#1101816).
• i40e: add function doc headers for ethtool stats functions (bsc#1101816).
• i40e: add function header for i40egetrxfh (bsc#1101816).
• i40e: add function header for i40egetrxfh (bsc#1101816).
• i40e: add helper conversion function for link_speed (bsc#1101816).
• i40e: add helper conversion function for link_speed (bsc#1101816).
• i40e: add tx_busy to ethtool stats (bsc#1101816).
• i40e: add tx_busy to ethtool stats (bsc#1101816).
• i40e: allow XPS with QoS enabled (bsc#1101816).
• i40e: allow XPS with QoS enabled (bsc#1101816).
• i40e: always return VEB stat strings (bsc#1101816).
• i40e: always return VEB stat strings (bsc#1101816).
• i40e: always return all queue stat strings (bsc#1101816).
• i40e: always return all queue stat strings (bsc#1101816).
• i40e: avoid divide by zero (bsc#1101816).
• i40e: avoid divide by zero (bsc#1101816).
• i40e: avoid overflow in i40eptpadjfreq() (bsc#1101816).
• i40e: avoid overflow in i40eptpadjfreq() (bsc#1101816).
• i40e: broadcast filters can trigger overflow promiscuous (bsc#1101816).
• i40e: broadcast filters can trigger overflow promiscuous (bsc#1101816).
• i40e: calculate ethtool stats size in a separate function (bsc#1101816).
• i40e: calculate ethtool stats size in a separate function (bsc#1101816).
• i40e: change flags to use 64 bits (bsc#1101816).
• i40e: change flags to use 64 bits (bsc#1101816).
• i40e: change ppp name to ddp (bsc#1101816).
• i40e: change ppp name to ddp (bsc#1101816).
• i40e: check for invalid DCB config (bsc#1101816).
• i40e: check for invalid DCB config (bsc#1101816).
• i40e: cleanup unnecessary parens (bsc#1101816).
• i40e: cleanup unnecessary parens (bsc#1101816).
• i40e: cleanup whitespace for some ethtool stat definitions (bsc#1101816).
• i40e: cleanup whitespace for some ethtool stat definitions (bsc#1101816).
• i40e: cleanup wording in a header comment (bsc#1101816).
• i40e: cleanup wording in a header comment (bsc#1101816).
• i40e: convert i40egetsettingslinkup to new API (bsc#1101816).
• i40e: convert i40egetsettingslinkup to new API (bsc#1101816).
• i40e: convert i40ephytypetoethtool to new API (bsc#1101816).
• i40e: convert i40ephytypetoethtool to new API (bsc#1101816).
• i40e: convert i40esetlink_ksettings to new API (bsc#1101816).
• i40e: convert i40esetlink_ksettings to new API (bsc#1101816).
• i40e: disallow programming multiple filters with same criteria (bsc#1101816).
• i40e: disallow programming multiple filters with same criteria (bsc#1101816).
• i40e: display priorityxon and priorityxoff stats (bsc#1101816).
• i40e: display priorityxon and priorityxoff stats (bsc#1101816).
• i40e: do not clear suspended state until we finish resuming (bsc#1101816).
• i40e: do not clear suspended state until we finish resuming (bsc#1101816).
• i40e: do not enter PHY debug mode while setting LEDs behaviour (bsc#1101816).
• i40e: do not enter PHY debug mode while setting LEDs behaviour (bsc#1101816).
• i40e: do not force filter failure in overflow promiscuous (bsc#1101816).
• i40e: do not force filter failure in overflow promiscuous (bsc#1101816).
• i40e: do not hold spinlock while resetting VF (bsc#1101816).
• i40e: do not hold spinlock while resetting VF (bsc#1101816).
• i40e: do not leak memory addresses (bsc#1101816).
• i40e: do not leak memory addresses (bsc#1101816).
• i40e: drop i40epf *pf from i40evcdisablevf() (bsc#1101816).
• i40e: drop i40epf *pf from i40evcdisablevf() (bsc#1101816).
• i40e: ensure reset occurs when disabling VF (bsc#1101816).
• i40e: ensure reset occurs when disabling VF (bsc#1101816).
• i40e: factor out re-enable functions for ATR and SB (bsc#1101816).
• i40e: factor out re-enable functions for ATR and SB (bsc#1101816).
• i40e: fix a typo (bsc#1101816).
• i40e: fix a typo (bsc#1101816).
• i40e: fix a typo in i40e_pf documentation (bsc#1101816).
• i40e: fix a typo in i40e_pf documentation (bsc#1101816).
• i40e: fix clearing link masks in i40egetlink_ksettings (bsc#1101816).
• i40e: fix clearing link masks in i40egetlink_ksettings (bsc#1101816).
• i40e: fix comment typo (bsc#1101816).
• i40e: fix comment typo (bsc#1101816).
• i40e: fix flags declaration (bsc#1101816).
• i40e: fix flags declaration (bsc#1101816).
• i40e: fix for flow director counters not wrapping as expected (bsc#1101816).
• i40e: fix for flow director counters not wrapping as expected (bsc#1101816).
• i40e: fix for wrong partition id calculation on OCP mezz cards (bsc#1101816).
• i40e: fix for wrong partition id calculation on OCP mezz cards (bsc#1101816).
• i40e: fix handling of vf_states variable (bsc#1101816).
• i40e: fix handling of vf_states variable (bsc#1101816).
• i40e: fix i40ephytypetoethtool function header (bsc#1101816).
• i40e: fix i40ephytypetoethtool function header (bsc#1101816).
• i40e: fix incorrect register definition (bsc#1101816).
• i40e: fix incorrect register definition (bsc#1101816).
• i40e: fix link reporting (bsc#1101816).
• i40e: fix link reporting (bsc#1101816).
• i40e: fix merge error (bsc#1101816).
• i40e: fix merge error (bsc#1101816).
• i40e: fix reading LLDP configuration (bsc#1101816).
• i40e: fix reading LLDP configuration (bsc#1101816).
• i40e: fix typo in function description (bsc#1101816).
• i40e: fix typo in function description (bsc#1101816).
• i40e: fix whitespace issues in i40e_ethtool.c (bsc#1101816).
• i40e: fix whitespace issues in i40e_ethtool.c (bsc#1101816).
• i40e: fold prefix strings directly into stat names (bsc#1101816).
• i40e: fold prefix strings directly into stat names (bsc#1101816).
• i40e: free skb after clearing lock in ptp_stop (bsc#1101816).
• i40e: free skb after clearing lock in ptp_stop (bsc#1101816).
• i40e: free the skb after clearing the bitlock (bsc#1101816).
• i40e: free the skb after clearing the bitlock (bsc#1101816).
• i40e: group autoneg PHY types together (bsc#1101816).
• i40e: group autoneg PHY types together (bsc#1101816).
• i40e: hold the RTNL lock while changing interrupt schemes (bsc#1101816).
• i40e: hold the RTNL lock while changing interrupt schemes (bsc#1101816).
• i40e: ignore skb->xmit_more when deciding to set RS bit (bsc#1101816).
• i40e: ignore skb->xmit_more when deciding to set RS bit (bsc#1101816).
• i40e: implement split pci error reset handler (bsc#1101816).
• i40e: implement split pci error reset handler (bsc#1101816).
• i40e: limit lan queue count in large CPU count machine (bsc#1101816).
• i40e: limit lan queue count in large CPU count machine (bsc#1101816).
• i40e: make const array patterns static, reduces object code size (bsc#1101816).
• i40e: make const array patterns static, reduces object code size (bsc#1101816).
• i40e: make i40evfmapringstovectors void (bsc#1101816).
• i40e: make i40evfmapringstovectors void (bsc#1101816).
• i40e: make use of i40evcdisable_vf (bsc#1101816).
• i40e: make use of i40evcdisable_vf (bsc#1101816).
• i40e: mark pm functions as _maybeunused (bsc#1101816).
• i40e: mark pm functions as _maybeunused (bsc#1101816).
• i40e: move AUTO_DISABLED flags into the state field (bsc#1101816).
• i40e: move AUTO_DISABLED flags into the state field (bsc#1101816).
• i40e: move I40EFLAGFILTER_SYNC to a state bit (bsc#1101816).
• i40e: move I40EFLAGFILTER_SYNC to a state bit (bsc#1101816).
• i40e: move I40EFLAGTEMPLINKPOLLING to state field (bsc#1101816).
• i40e: move I40EFLAGTEMPLINKPOLLING to state field (bsc#1101816).
• i40e: move I40EFLAGUDPFILTERSYNC to the state field (bsc#1101816).
• i40e: move I40EFLAGUDPFILTERSYNC to the state field (bsc#1101816).
• i40e: move client flags into state bits (bsc#1101816).
• i40e: move client flags into state bits (bsc#1101816).
• i40e: prevent service task from running while we're suspended (bsc#1101816).
• i40e: prevent service task from running while we're suspended (bsc#1101816).
• i40e: re-enable PTP L4 capabilities for XL710 if FW >6.0 (bsc#1101816).
• i40e: re-enable PTP L4 capabilities for XL710 if FW >6.0 (bsc#1101816).
• i40e: re-number feature flags to remove gaps (bsc#1101816).
• i40e: re-number feature flags to remove gaps (bsc#1101816).
• i40e: redfine I40EPHYTYPE_MAX (bsc#1101816).
• i40e: redfine I40EPHYTYPE_MAX (bsc#1101816).
• i40e: reduce lrxqthresh from 2 to 1 (bsc#1101816).
• i40e: reduce lrxqthresh from 2 to 1 (bsc#1101816).
• i40e: refactor FW version checking (bsc#1101816).
• i40e: refactor FW version checking (bsc#1101816).
• i40e: refactor promiscchanged in i40esyncvsifilters (bsc#1101816).
• i40e: refactor promiscchanged in i40esyncvsifilters (bsc#1101816).
• i40e: relax warning message in case of version mismatch (bsc#1101816).
• i40e: relax warning message in case of version mismatch (bsc#1101816).
• i40e: remove duplicate pfc stats (bsc#1101816).
• i40e: remove duplicate pfc stats (bsc#1101816).
• i40e: remove i40e_fcoe files (bsc#1101816).
• i40e: remove i40e_fcoe files (bsc#1101816).
• i40e: remove ifdef SPEED_25000 (bsc#1101816).
• i40e: remove ifdef SPEED_25000 (bsc#1101816).
• i40e: remove logically dead code (bsc#1101816).
• i40e: remove logically dead code (bsc#1101816).
• i40e: remove redundant initialization of read_size (bsc#1101816).
• i40e: remove redundant initialization of read_size (bsc#1101816).
• i40e: rename 'change' variable to 'autoneg_changed' (bsc#1101816).
• i40e: rename 'change' variable to 'autoneg_changed' (bsc#1101816).
• i40e: rename 'cmd' variables in ethtool interface (bsc#1101816).
• i40e: rename 'cmd' variables in ethtool interface (bsc#1101816).
• i40e: restore TCPv4 input set when re-enabling ATR (bsc#1101816).
• i40e: restore TCPv4 input set when re-enabling ATR (bsc#1101816).
• i40e: restore promiscuous after reset (bsc#1101816).
• i40e: restore promiscuous after reset (bsc#1101816).
• i40e: shutdown all IRQs and disable MSI-X when suspended (bsc#1101816).
• i40e: shutdown all IRQs and disable MSI-X when suspended (bsc#1101816).
• i40e: simplify member variable accesses (bsc#1101816).
• i40e: simplify member variable accesses (bsc#1101816).
• i40e: split i40egetstrings() into smaller functions (bsc#1101816).
• i40e: split i40egetstrings() into smaller functions (bsc#1101816).
• i40e: stop using cmpxchg flow in i40esetpriv_flags() (bsc#1101816).
• i40e: stop using cmpxchg flow in i40esetpriv_flags() (bsc#1101816).
• i40e: track filter type statistics when deleting invalid filters (bsc#1101816).
• i40e: track filter type statistics when deleting invalid filters (bsc#1101816).
• i40e: track id can be 0 (bsc#1101816).
• i40e: track id can be 0 (bsc#1101816).
• i40e: update VFs of link state after GETVFRESOURCES (bsc#1101816).
• i40e: update VFs of link state after GETVFRESOURCES (bsc#1101816).
• i40e: update data pointer directly when copying to the buffer (bsc#1101816).
• i40e: update data pointer directly when copying to the buffer (bsc#1101816).
• i40e: use WARNONCE to replace the commented BUGON size check (bsc#1101816).
• i40e: use WARNONCE to replace the commented BUGON size check (bsc#1101816).
• i40e: use a local variable instead of calculating multiple times (bsc#1101816).
• i40e: use a local variable instead of calculating multiple times (bsc#1101816).
• i40e: use admin queue for setting LEDs behavior (bsc#1101816).
• i40e: use admin queue for setting LEDs behavior (bsc#1101816).
• i40e: use newer generic pm support instead of legacy pm callbacks (bsc#1101816).
• i40e: use newer generic pm support instead of legacy pm callbacks (bsc#1101816).
• i40e: use separate state bit for miscellaneous IRQ setup (bsc#1101816).
• i40e: use separate state bit for miscellaneous IRQ setup (bsc#1101816).
• i40e: use the more traditional 'i' loop variable (bsc#1101816).
• i40e: use the more traditional 'i' loop variable (bsc#1101816).
• i40evf: Allow turning off offloads when the VF has VLAN set (bsc#1101816).
• i40evf: Allow turning off offloads when the VF has VLAN set (bsc#1101816).
• i40evf: Clean-up flags for promisc mode to avoid high polling rate (bsc#1101816).
• i40evf: Clean-up flags for promisc mode to avoid high polling rate (bsc#1101816).
• i40evf: Correctly populate rxitridx and txitridx (bsc#1101816).
• i40evf: Correctly populate rxitridx and txitridx (bsc#1101816).
• i40evf: Do not clear MSI-X PBA manually (bsc#1101816).
• i40evf: Do not clear MSI-X PBA manually (bsc#1101816).
• i40evf: Drop i40evffiresw_int as it is prone to races (bsc#1101816).
• i40evf: Drop i40evffiresw_int as it is prone to races (bsc#1101816).
• i40evf: Enable VF to request an alternate queue allocation (bsc#1101816).
• i40evf: Enable VF to request an alternate queue allocation (bsc#1101816).
• i40evf: Fix a hardware reset support in VF driver (bsc#1101816).
• i40evf: Fix a hardware reset support in VF driver (bsc#1101816).
• i40evf: Fix double locking the same resource (bsc#1101816).
• i40evf: Fix double locking the same resource (bsc#1101816).
• i40evf: Fix link up issue when queues are disabled (bsc#1101816).
• i40evf: Fix link up issue when queues are disabled (bsc#1101816).
• i40evf: Fix turning TSO, GSO and GRO on after (bsc#1101816).
• i40evf: Fix turning TSO, GSO and GRO on after (bsc#1101816).
• i40evf: Make VF reset warning message more clear (bsc#1101816).
• i40evf: Make VF reset warning message more clear (bsc#1101816).
• i40evf: Replace GFPATOMIC with GFPKERNEL in i40evfaddvlan (bsc#1101816).
• i40evf: Replace GFPATOMIC with GFPKERNEL in i40evfaddvlan (bsc#1101816).
• i40evf: Use an iterator of the same type as the list (bsc#1101816).
• i40evf: Use an iterator of the same type as the list (bsc#1101816).
• i40evf: enable support for VF VLAN tag stripping control (bsc#1101816).
• i40evf: enable support for VF VLAN tag stripping control (bsc#1101816).
• i40evf: fix client notify of l2 params (bsc#1101816).
• i40evf: fix client notify of l2 params (bsc#1101816).
• i40evf: fix ring to vector mapping (bsc#1101816).
• i40evf: fix ring to vector mapping (bsc#1101816).
• i40evf: hold the critical task bit lock while opening (bsc#1101816).
• i40evf: hold the critical task bit lock while opening (bsc#1101816).
• i40evf: lower message level (bsc#1101816).
• i40evf: lower message level (bsc#1101816).
• i40evf: release bit locks in reverse order (bsc#1101816).
• i40evf: release bit locks in reverse order (bsc#1101816).
• i40evf: remove flags that are never used (bsc#1101816).
• i40evf: remove flags that are never used (bsc#1101816).
• i40evf: remove flushscheduledwork call in i40evf_remove (bsc#1101816).
• i40evf: remove flushscheduledwork call in i40evf_remove (bsc#1101816).
• i40evf: use GFP_ATOMIC under spin lock (bsc#1101816).
• i40evf: use GFP_ATOMIC under spin lock (bsc#1101816).
• i40evf: use _devcsync routines in .setrx_mode (bsc#1101816).
• i40evf: use _devcsync routines in .setrx_mode (bsc#1101816).
• i40evf: use spinlock to protect (mac|vlan)filterlist (bsc#1101816).
• i40evf: use spinlock to protect (mac|vlan)filterlist (bsc#1101816).
• i40iw: Fix memory leak in error path of create QP (bsc#1058659).
• i40iw: Fix memory leak in error path of create QP (bsc#1058659).
• i40iw: Refactor of driver generated AEs (bsc#1058659).
• i40iw: Refactor of driver generated AEs (bsc#1058659).
• i40iw: Tear-down connection after CQP Modify QP failure (bsc#1058659).
• i40iw: Tear-down connection after CQP Modify QP failure (bsc#1058659).
• i40iw: Use correct address in dstneighlookup for IPv6 (bsc#1058659).
• i40iw: Use correct address in dstneighlookup for IPv6 (bsc#1058659).
• ib/core: Fix error code for invalid GID entry (bsc#1046306).
• ib/core: Fix error code for invalid GID entry (bsc#1046306).
• ib/core: Honor port_num while resolving GID for ib link layer (bsc#1046306).
• ib/core: Honor port_num while resolving GID for ib link layer (bsc#1046306).
• ib/core: Make ibmadclient_id atomic (bsc#1046306).
• ib/core: Make ibmadclient_id atomic (bsc#1046306).
• ib/core: Make testing MR flags for writability a static inline function (bsc#1046306).
• ib/core: Make testing MR flags for writability a static inline function (bsc#1046306).
• ib/core: Remove duplicate declaration of gidcachewq (bsc#1046306).
• ib/core: Remove duplicate declaration of gidcachewq (bsc#1046306).
• ib/hfi1: Add bypass register defines and replace blind constants (bsc#1060463).
• ib/hfi1: Add bypass register defines and replace blind constants (bsc#1060463).
• ib/hfi1: Fix fault injection init/exit issues (bsc#1060463).
• ib/hfi1: Fix fault injection init/exit issues (bsc#1060463).
• ib/hfi1: Fix incorrect mixing of ERR_PTR and NULL return values (bsc#1060463).
• ib/hfi1: Fix incorrect mixing of ERR_PTR and NULL return values (bsc#1060463).
• ib/hfi1: Fix user context tail allocation for DMA_RTAIL (bsc#1060463).
• ib/hfi1: Fix user context tail allocation for DMA_RTAIL (bsc#1060463).
• ib/hfi1: Return actual error value from program_rcvarray() (bsc#1060463).
• ib/hfi1: Return actual error value from program_rcvarray() (bsc#1060463).
• ib/iser: Do not reduce max_sectors (bsc#1046306).
• ib/iser: Do not reduce max_sectors (bsc#1046306).
• ib/isert: Fix for lib/dmadebug checksync warning (bsc#1046306).
• ib/isert: Fix for lib/dmadebug checksync warning (bsc#1046306).
• ib/isert: fix T10-pi check mask setting (bsc#1046306).
• ib/isert: fix T10-pi check mask setting (bsc#1046306).
• ib/mlx4: Fix an error handling path in 'mlx4ibreregusermr()' (bsc#1046302).
• ib/mlx4: Fix an error handling path in 'mlx4ibreregusermr()' (bsc#1046302).
• ib/mlx4: Mark user MR as writable if actual virtual memory is writable (bsc#1046302).
• ib/mlx4: Mark user MR as writable if actual virtual memory is writable (bsc#1046302).
• ib/mlx5: Fetch soft WQE's on fatal error state (bsc#1046305).
• ib/mlx5: Fetch soft WQE's on fatal error state (bsc#1046305).
• ib/mlx5: Use 'kvfree()' for memory allocated by 'kvzalloc()' (bsc#1046305).
• ib/mlx5: Use 'kvfree()' for memory allocated by 'kvzalloc()' (bsc#1046305).
• ib/qedr: Remove GID add/del dummy routines (bsc#1086314 bsc#1086313 bsc#1086301).
• ib/qedr: Remove GID add/del dummy routines (bsc#1086314 bsc#1086313 bsc#1086301).
• ib/rxe: Fix for oops in rxeregisterdevice on ppc64le arch (bsc#1046306).
• ib/rxe: Fix for oops in rxeregisterdevice on ppc64le arch (bsc#1046306).
• ib/rxe: add RXESTARTMASK for rxeopcode ibOPCODERCSENDONLYINV (bsc#1046306).
• ib/rxe: add RXESTARTMASK for rxeopcode ibOPCODERCSENDONLYINV (bsc#1046306).
• ib/rxe: avoid double kfree_skb (bsc#1046306).
• ib/rxe: avoid double kfree_skb (bsc#1046306).
• ib/umem: Use the correct mm during ibumemrelease (bsc#1046306).
• ib/umem: Use the correct mm during ibumemrelease (bsc#1046306).
• ib/uverbs: Fix possible oops with duplicate ioctl attributes (bsc#1046306).
• ib/uverbs: Fix possible oops with duplicate ioctl attributes (bsc#1046306).
• ibmvnic: Fix error recovery on login failure (bsc#1101789).
• igb: Fix not adding filter elements to the list (bsc#1056651).
• igb: Fix not adding filter elements to the list (bsc#1056651).
• igb: Fix queue selection on MAC filters on i210 (bsc#1056651).
• igb: Fix queue selection on MAC filters on i210 (bsc#1056651).
• iio: BME280: Updates to Humidity readings need ctrl_reg write! (bsc#1051510).
• iio: accel: st_accel: fix data-ready line configuration (bsc#1051510).
• iio: accel: stacceli2c: fix i2cdeviceid table (bsc#1051510).
• iio: accel: staccelspi: fix spideviceid table (bsc#1051510).
• iio: adc: sun4i-gpadc-iio: fix unbalanced irq enable/disable (bsc#1051510).
• iio: adc: twl4030: Return an error if we can not enable the vusb3v1 regulator in 'twl4030madcprobe()' (bsc#1051510).
• iio: gyro: st_gyro: fix L3GD20H support (bsc#1051510).
• iio: humidity: hts221: remove warnings in hts221parse{temp,rh}_caldata() (bsc#1051510).
• iio: imu: inv_mpu6050: test whoami first and against all known values (bsc#1051510).
• iio: magnetometer: st_magn: fix drdy line configuration for LIS3MDL (bsc#1051510).
• iio: magnetometer: stmagncore: enable multiread by default for LIS3MDL (bsc#1051510).
• iio: magnetometer: stmagnspi: fix spideviceid table (bsc#1051510).
• iio: pressure: bmp280: fix relative humidity unit (bsc#1051510).
• iio: pressure: st_pressure: fix drdy configuration for LPS22HB and LPS25H (bsc#1051510).
• iio: pressure: zpa2326: Remove always-true check which confuses gcc (bsc#1051510).
• iio: pressure: zpa2326: report interrupted case as failure (bsc#1051510).
• iio: trigger: stm32-timer: fix quadrature mode get routine (bsc#1051510).
• iio: trigger: stm32-timer: fix write_raw return value (bsc#1051510).
• iio: tsl2583: correct values in integrationtimeavailable (bsc#1051510).
• infiniband: fix a possible use-after-free bug (bsc#1046306).
• infiniband: fix a possible use-after-free bug (bsc#1046306).
• iommu/vt-d: Clear Page Request Overflow fault bit ().
• iommu/vt-d: Clear Page Request Overflow fault bit ().
• ip6tunnel: remove magic mtu value 0xFFF8 (networking-stable-1806_08).
• ipc/shm: fix use-after-free of shm file via remapfilepages() (bnc#1102512).
• ipmr: properly check rhltableinit() return value (networking-stable-1806_08).
• ipv4: remove warning in iprecverror (networking-stable-180608).
• ipv6: allow pmTU exceptions to local routes (networking-stable-180620).
• ipv6: sr: fix memory OOB access in seg6dosrhencap/inline (networking-stable-1806_08).
• iwcxgb4: Add ibdevice->get_netdev support (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• iwcxgb4: correctly enforce the max regmr depth (bsc#1046543).
• iwcxgb4: correctly enforce the max regmr depth (bsc#1046543).
• iwcxgb4: initialize ibmr fields for user mrs (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• ixgbe/fm10k: Record macvlan stats instead of Rx queue for macvlan offloaded rings (bsc#1101674).
• ixgbe/fm10k: Record macvlan stats instead of Rx queue for macvlan offloaded rings (bsc#1101674).
• ixgbe/ixgbevf: Free IRQ when pci error recovery removes the device (bsc#1101674).
• ixgbe/ixgbevf: Free IRQ when pci error recovery removes the device (bsc#1101674).
• ixgbe: Add receive length error counter (bsc#1101674).
• ixgbe: Add receive length error counter (bsc#1101674).
• ixgbe: Add support for macvlan offload RSS on X550 and clean-up pool handling (bsc#1101674).
• ixgbe: Add support for macvlan offload RSS on X550 and clean-up pool handling (bsc#1101674).
• ixgbe: Assume provided MAC filter has been verified by macvlan (bsc#1101674).
• ixgbe: Assume provided MAC filter has been verified by macvlan (bsc#1101674).
• ixgbe: Avoid to write the RETA table when unnecessary (bsc#1101674).
• ixgbe: Avoid to write the RETA table when unnecessary (bsc#1101674).
• ixgbe: Clear SWFW_SYNC register during init (bsc#1101674).
• ixgbe: Clear SWFW_SYNC register during init (bsc#1101674).
• ixgbe: Default to 1 pool always being allocated (bsc#1101674).
• ixgbe: Default to 1 pool always being allocated (bsc#1101674).
• ixgbe: Do not assume dev->num_tc is equal to hardware TC config (bsc#1101674).
• ixgbe: Do not assume dev->num_tc is equal to hardware TC config (bsc#1101674).
• ixgbe: Do not manipulate macvlan Tx queues when performing macvlan offload (bsc#1101674).
• ixgbe: Do not manipulate macvlan Tx queues when performing macvlan offload (bsc#1101674).
• ixgbe: Do not report unsupported timestamping filters for X550 (bsc#1101674).
• ixgbe: Do not report unsupported timestamping filters for X550 (bsc#1101674).
• ixgbe: Drop l2accelpriv data pointer from ring struct (bsc#1101674).
• ixgbe: Drop l2accelpriv data pointer from ring struct (bsc#1101674).
• ixgbe: Drop support for macvlan specific unicast lists (bsc#1101674).
• ixgbe: Drop support for macvlan specific unicast lists (bsc#1101674).
• ixgbe: Fix && vs || typo (bsc#1101674).
• ixgbe: Fix handling of macvlan Tx offload (bsc#1101674).
• ixgbe: Fix handling of macvlan Tx offload (bsc#1101674).
• ixgbe: Fix interaction between SR-IOV and macvlan offload (bsc#1101674).
• ixgbe: Fix interaction between SR-IOV and macvlan offload (bsc#1101674).
• ixgbe: Fix kernel-doc format warnings (bsc#1101674).
• ixgbe: Fix kernel-doc format warnings (bsc#1101674).
• ixgbe: Fix limitations on macvlan so we can support up to 63 offloaded devices (bsc#1101674).
• ixgbe: Fix limitations on macvlan so we can support up to 63 offloaded devices (bsc#1101674).
• ixgbe: Fix logic operator typo (bsc#1101674).
• ixgbe: Fix setting of TC configuration for macvlan case (bsc#1101674).
• ixgbe: Fix setting of TC configuration for macvlan case (bsc#1101674).
• ixgbe: Perform reinit any time number of VFs change (bsc#1101674).
• ixgbe: Perform reinit any time number of VFs change (bsc#1101674).
• ixgbe: Remove an obsolete comment about ITR (bsc#1101674).
• ixgbe: Remove an obsolete comment about ITR (bsc#1101674).
• ixgbe: There is no need to update numrxpools in L2 fwd offload (bsc#1101674).
• ixgbe: There is no need to update numrxpools in L2 fwd offload (bsc#1101674).
• ixgbe: Update adaptive ITR algorithm (bsc#1101674).
• ixgbe: Update adaptive ITR algorithm (bsc#1101674).
• ixgbe: Use ring values to test for Tx pending (bsc#1101674).
• ixgbe: Use ring values to test for Tx pending (bsc#1101674).
• ixgbe: add counter for times Rx pages gets allocated, not recycled (bsc#1101674).
• ixgbe: add counter for times Rx pages gets allocated, not recycled (bsc#1101674).
• ixgbe: add error checks when initializing the PHY (bsc#1101674).
• ixgbe: add error checks when initializing the PHY (bsc#1101674).
• ixgbe: add status reg reads to ixgbecheckremove (bsc#1101674).
• ixgbe: add status reg reads to ixgbecheckremove (bsc#1101674).
• ixgbe: add support for reporting 5G link speed (bsc#1101674).
• ixgbe: add support for reporting 5G link speed (bsc#1101674).
• ixgbe: advertise highest capable link speed (bsc#1101674).
• ixgbe: advertise highest capable link speed (bsc#1101674).
• ixgbe: avoid bringing rings up/down as macvlans are added/removed (bsc#1101674).
• ixgbe: avoid bringing rings up/down as macvlans are added/removed (bsc#1101674).
• ixgbe: declare ixgbemacoperations structures as const (bsc#1101674).
• ixgbe: declare ixgbemacoperations structures as const (bsc#1101674).
• ixgbe: enable multicast on shutdown for WOL (bsc#1101674).
• ixgbe: enable multicast on shutdown for WOL (bsc#1101674).
• ixgbe: extend firmware version support (bsc#1101674).
• ixgbe: extend firmware version support (bsc#1101674).
• ixgbe: fix crash when injecting AER after failed reset (bsc#1101674).
• ixgbe: fix crash when injecting AER after failed reset (bsc#1101674).
• ixgbe: fix disabling hide VLAN on VF reset (bsc#1101674).
• ixgbe: fix disabling hide VLAN on VF reset (bsc#1101674).
• ixgbe: fix possible race in reset subtask (bsc#1101674).
• ixgbe: fix possible race in reset subtask (bsc#1101674).
• ixgbe: fix read-modify-write in x550 phy setup (bsc#1101674).
• ixgbe: fix read-modify-write in x550 phy setup (bsc#1101674).
• ixgbe: fix the FWSM.PT check in ixgbemngpresent() (bsc#1101674).
• ixgbe: fix the FWSM.PT check in ixgbemngpresent() (bsc#1101674).
• ixgbe: force VF to grab new MAC on driver reload (bsc#1101674).
• ixgbe: force VF to grab new MAC on driver reload (bsc#1101674).
• ixgbe: introduce a helper to simplify code (bsc#1101674).
• ixgbe: introduce a helper to simplify code (bsc#1101674).
• ixgbe: remove redundant initialization of 'pool' (bsc#1101674).
• ixgbe: remove redundant initialization of 'pool' (bsc#1101674).
• ixgbe: remove unused enum latency_range (bsc#1101674).
• ixgbe: remove unused enum latency_range (bsc#1101674).
• ixgbe: restore normal RSS after last macvlan offload is removed (bsc#1101674).
• ixgbe: restore normal RSS after last macvlan offload is removed (bsc#1101674).
• ixgbe: return error on unsupported SFP module when resetting (bsc#1101674).
• ixgbe: return error on unsupported SFP module when resetting (bsc#1101674).
• ixgbe: split Tx/Rx ring clearing for ethtool loopback test (bsc#1101674).
• ixgbe: split Tx/Rx ring clearing for ethtool loopback test (bsc#1101674).
• ixgbe: use ARRAY_SIZE for array sizing calculation on array buf (bsc#1101674).
• ixgbe: use ARRAY_SIZE for array sizing calculation on array buf (bsc#1101674).
• ixgbevf: Fix kernel-doc format warnings (bsc#1101674).
• ixgbevf: Fix kernel-doc format warnings (bsc#1101674).
• ixgbevf: add build_skb support (bsc#1101674).
• ixgbevf: add build_skb support (bsc#1101674).
• ixgbevf: add counters for Rx page allocations (bsc#1101674).
• ixgbevf: add counters for Rx page allocations (bsc#1101674).
• ixgbevf: add ethtool private flag for legacy Rx (bsc#1101674).
• ixgbevf: add ethtool private flag for legacy Rx (bsc#1101674).
• ixgbevf: add function for checking if we can reuse page (bsc#1101674).
• ixgbevf: add function for checking if we can reuse page (bsc#1101674).
• ixgbevf: add support for DMAATTRSKIPCPUSYNC/WEAK_ORDERING (bsc#1101674).
• ixgbevf: add support for DMAATTRSKIPCPUSYNC/WEAK_ORDERING (bsc#1101674).
• ixgbevf: add support for padding packet (bsc#1101674).
• ixgbevf: add support for padding packet (bsc#1101674).
• ixgbevf: add support for using order 1 pages to receive large frames (bsc#1101674).
• ixgbevf: add support for using order 1 pages to receive large frames (bsc#1101674).
• ixgbevf: allocate the rings as part of q_vector (bsc#1101674).
• ixgbevf: allocate the rings as part of q_vector (bsc#1101674).
• ixgbevf: break out Rx buffer page management (bsc#1101674).
• ixgbevf: break out Rx buffer page management (bsc#1101674).
• ixgbevf: clear rxbufferinfo in configure instead of clean (bsc#1101674).
• ixgbevf: clear rxbufferinfo in configure instead of clean (bsc#1101674).
• ixgbevf: do not bother clearing txbufferinfo in ixgbevfcleantx_ring() (bsc#1101674).
• ixgbevf: do not bother clearing txbufferinfo in ixgbevfcleantx_ring() (bsc#1101674).
• ixgbevf: fix MAC address changes through ixgbevfsetmac() (bsc#1101674).
• ixgbevf: fix MAC address changes through ixgbevfsetmac() (bsc#1101674).
• ixgbevf: fix ixgbevfxmitframe()'s return type (bsc#1101674).
• ixgbevf: fix ixgbevfxmitframe()'s return type (bsc#1101674).
• ixgbevf: fix possible race in the reset subtask (bsc#1101674).
• ixgbevf: fix possible race in the reset subtask (bsc#1101674).
• ixgbevf: fix unused variable warning (bsc#1101674).
• ixgbevf: fix unused variable warning (bsc#1101674).
• ixgbevf: improve performance and reduce size of ixgbevftxmap() (bsc#1101674).
• ixgbevf: improve performance and reduce size of ixgbevftxmap() (bsc#1101674).
• ixgbevf: make sure all frames fit minimum size requirements (bsc#1101674).
• ixgbevf: make sure all frames fit minimum size requirements (bsc#1101674).
• ixgbevf: only DMA sync frame length (bsc#1101674).
• ixgbevf: only DMA sync frame length (bsc#1101674).
• ixgbevf: remove redundant initialization of variable 'dma' (bsc#1101674).
• ixgbevf: remove redundant initialization of variable 'dma' (bsc#1101674).
• ixgbevf: remove redundant setting of xcast_mode (bsc#1101674).
• ixgbevf: remove redundant setting of xcast_mode (bsc#1101674).
• ixgbevf: setup queue counts (bsc#1101674).
• ixgbevf: setup queue counts (bsc#1101674).
• ixgbevf: update code to better handle incrementing page count (bsc#1101674).
• ixgbevf: update code to better handle incrementing page count (bsc#1101674).
• ixgbevf: use ARRAY_SIZE for various array sizing calculations (bsc#1101674).
• ixgbevf: use ARRAY_SIZE for various array sizing calculations (bsc#1101674).
• ixgbevf: use length to determine if descriptor is done (bsc#1101674).
• ixgbevf: use length to determine if descriptor is done (bsc#1101674).
• ixgbevf: use page_address offset from page (bsc#1101674).
• ixgbevf: use page_address offset from page (bsc#1101674).
• jumplabel: Add branch hints to staticbranch_{un,}likely() (bnc#1101669 optimise numa balancing for fast migrate).
• kABI: fixes for nvme (bsc#1077989).
• kABI: fixes for qla2xxx (bsc#1077989).
• kabi mlx5 hide cpu_rmap (bsc#1046303).
• kabi/severities: add qed inter module symbols to kabi ignore list
• kabi: breakage for of/device change (bsc#1051510).
• kabi: cxgb4 MU (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• kabi: due to perf_event.h uapi field change ().
• kabi: for rtldeinitdeferred_work() rewrite (bsc#1051510).
• kabi: mlx5 hide cpu_rmap (bsc#1046303).
• kabi: mvpp2 10gkr support (bsc#1098633).
• kabi: powerpc: mmucontext: provide old version of mmiommuuato_hpa (bsc#1077761, git-fixes).
• kabi: protect fwnode_handle (bsc#1098633).
• kcm: Fix use-after-free caused by clonned sockets (networking-stable-180608).
• kernel/params.c: downgrade warning for unsafe parameters (bsc#1051510).
• keys: DNS: fix parsing multiple options (bsc#1051510).
• kvm: PPC: Check if IOMMU page is contained in the pinned physical page (bsc#1077761, git-fixes).
• kvm: x86: fix vcpu initialization with userspace lapic (bsc#1101564).
• kvm: x86: move LAPIC initialization after VMCS creation (bsc#1101564).
• libnvdimm, label: fix index block size calculation (bsc#1102147).
• libnvdimm: add an api to cast a 'struct nd_region' to its 'struct device' (bsc#1094119).
• mailbox: PCC: erroneous error message when parsing ACPI PCCT (bsc#1096330).
• mailbox: bcm2835: Fix of_xlate return value (bsc#1051510).
• mdio-sun4i: Fix a memory leak (bsc#1051510).
• media: coda/imx-vdoa: Check for platformgetresource() error (bsc#1051510).
• media: cx25840: Use subdev host data for PLL override (bsc#1051510).
• media: cx88: Get rid of spurious call to cx8800startvbi_dma() (bsc#1051510).
• media: cxusb: restore RC_MAP for MyGica T230 (bsc#1051510).
• media: dt-bindings: media: rcar_vin: Use status 'okay' (bsc#1051510).
• media: dvb-core: always call invokerelease() in fefree() (bsc#1051510).
• media: dvb_frontend: fix ifnullfree.cocci warnings (bsc#1051510).
• media: dvb_frontend: only use kref after initialized (bsc#1051510).
• media: dvbnet: ensure that dvbnetulehandle is fully initialized (bsc#1051510).
• media: mxl111sf: Fix potential null pointer dereference (bsc#1051510).
• media: omap3isp/isp: remove an unused static var (bsc#1051510).
• media: s5p-jpeg: fix number of components macro (bsc#1051510).
• media: s5p-mfc: Fix lock contention - request_firmware() once (bsc#1051510).
• media: staging: omap4iss: Include asm/cacheflush.h after generic includes (bsc#1051510).
• media: vivid: potential integer overflow in vidiocgedid() (bsc#1051510).
• mfd: tps65218: Reorder tps65218regulatorid enum (bsc#1051510).
• mfd: tps65911-comparator: Fix a build error (bsc#1051510).
• mfd: tps65911-comparator: Fix an off by one bug (bsc#1051510).
• mlxsw: spectrum: Forbid creation of VLAN 1 over port/LAG (networking-stable-180608).
• mmc: cavium: Fix use-after-free in ofplatformdevice_destroy (bsc#1051510).
• mmc: dw_mmc: fix card threshold control configuration (bsc#1051510).
• mmc: meson-gx: remove CLKDIVIDERALLOW_ZERO clock flag (bsc#1051510).
• mmc: sdhci-msm: fix issue with power irq (bsc#1051510).
• mmc: sdhci-of-esdhc: disable SD clock for clock value 0 (bsc#1051510).
• mmc: sdhci-of-esdhc: fix eMMC couldn't work after kexec (bsc#1051510).
• mmc: sdhci-of-esdhc: fix the mmc error after sleep on ls1046ardb (bsc#1051510).
• mmc: sdhci-xenon: Fix clock resource by adding an optional bus clock (bsc#1051510).
• mmc: sdhci-xenon: wait 5ms after set 1.8V signal enable (bsc#1051510).
• mmc: tmio: remove outdated comment (bsc#1051510).
• modsign: log module name in the event of an error (bsc#1093666).
• modsign: print module name along with error message (bsc#1093666).
• module: make it clear when we're handling the module copy in info->hdr (bsc#1093666).
• module: setup load info before modulesigcheck() (bsc#1093666).
• mvpp2: fix multicast address filter (bsc#1098633).
• net-sysfs: Fix memory leak in XPS configuration (networking-stable-180608).
• net/mlx4: Fix irq-unsafe spinlock usage (networking-stable-180608).
• net/mlx4core: Fix error handling in mlx4initportinfo (bsc#1046300).
• net/mlx4core: Fix error handling in mlx4initportinfo (bsc#1046300).
• net/mlx4_core: Save the qpn from the input modifier in RST2INIT wrapper (bsc#1046300).
• net/mlx4_core: Save the qpn from the input modifier in RST2INIT wrapper (bsc#1046300).
• net/mlx4_en: Do not reuse RX page when XDP is set (bsc#1046299).
• net/mlx4_en: Do not reuse RX page when XDP is set (bsc#1046299).
• net/mlx5: Adjust clock overflow work period (bsc#1046303).
• net/mlx5: Adjust clock overflow work period (bsc#1046303).
• net/mlx5: Eswitch, Use 'kvfree()' for memory allocated by 'kvzalloc()' (bsc#1046303).
• net/mlx5: Eswitch, Use 'kvfree()' for memory allocated by 'kvzalloc()' (bsc#1046303).
• net/mlx5: FPGA, Call DMA unmap with the right size (bsc#1046303).
• net/mlx5: FPGA, Call DMA unmap with the right size (bsc#1046303).
• net/mlx5: Fix command interface race in polling mode (bsc#1046300).
• net/mlx5: Fix command interface race in polling mode (bsc#1046300).
• net/mlx5: Fix dump_command mailbox length printed (bsc#1046303).
• net/mlx5: Fix dump_command mailbox length printed (bsc#1046303).
• net/mlx5: Fix incorrect raw command length parsing (bsc#1046300).
• net/mlx5: Fix incorrect raw command length parsing (bsc#1046300).
• net/mlx5: Fix wrong size allocation for QoS ETC TC regitster (bsc#1046300).
• net/mlx5: Fix wrong size allocation for QoS ETC TC regitster (bsc#1046300).
• net/mlx5: Free IRQs in shutdown path (bsc#1046303).
• net/mlx5: Free IRQs in shutdown path (bsc#1046303).
• net/mlx5: IPSec, Fix a race between concurrent sandbox QP commands (bsc#1046303).
• net/mlx5: IPSec, Fix a race between concurrent sandbox QP commands (bsc#1046303).
• net/mlx5: Properly deal with flow counters when deleting rules (bsc#1046303).
• net/mlx5: Properly deal with flow counters when deleting rules (bsc#1046303).
• net/mlx5: Protect from command bit overflow (bsc#1046303).
• net/mlx5: Protect from command bit overflow (bsc#1046303).
• net/mlx5: Refactor num of blocks in mailbox calculation (bsc#1046303).
• net/mlx5: Refactor num of blocks in mailbox calculation (bsc#1046303).
• net/mlx5: Vport, Use 'kvfree()' for memory allocated by 'kvzalloc()' (bsc#1046303).
• net/mlx5: Vport, Use 'kvfree()' for memory allocated by 'kvzalloc()' (bsc#1046303).
• net/mlx5e: Do not allow aRFS for encapsulated packets (bsc#1046303).
• net/mlx5e: Do not allow aRFS for encapsulated packets (bsc#1046303).
• net/mlx5e: Do not attempt to dereference the ppriv struct if not being eswitch manager (bsc#1046300).
• net/mlx5e: Do not attempt to dereference the ppriv struct if not being eswitch manager (bsc#1046300).
• net/mlx5e: Fix quota counting in aRFS expire flow (bsc#1046303).
• net/mlx5e: Fix quota counting in aRFS expire flow (bsc#1046303).
• net/mlx5e: Refine ets validation function (bsc#1075360).
• net/mlx5e: Remove redundant vport context vlan update (bsc#1046303).
• net/mlx5e: Remove redundant vport context vlan update (bsc#1046303).
• net/mlx5e: When RXFCS is set, add FCS data into checksum calculation (networking-stable-180608).
• net/packet: refine check for priv area size (networking-stable-180608).
• net/sched: actsimple: fix parsing of TCADEFDATA (networking-stable-1806_20).
• net/sched: acttunnelkey: fix NULL dereference when 'goto chain' is used (bsc#1056787).
• net/sched: fix NULL dereference in the error path of tcfsampleinit() (bsc#1056787).
• net: add rbtoskb() and other rb tree helpers (bsc#1102340).
• net: cxgb3_main: fix potential Spectre v1 (bsc#1046533).
• net: cxgb3_main: fix potential Spectre v1 (bsc#1046533).
• net: define the TSO header size in net/tso.h (bsc#1098633).
• net: dsa: add error handling for pskbtrimrcsum (networking-stable-180620).
• net: ethernet: davinciemac: fix error handling in probe() (networking-stable-1806_08).
• net: ethernet: ti: cpdma: correct error handling for chan create (networking-stable-180608).
• net: ethtool: Add macro to clear a link mode setting (bsc#1101816).
• net: ethtool: Add macro to clear a link mode setting (bsc#1101816).
• net: in virtionethdr only add VLANHLEN to csumstart if payload holds vlan (networking-stable-180620).
• net: ipv4: add missing RTATABLE to rtmipv4policy (networking-stable-1806_08).
• net: metrics: add proper netlink validation (networking-stable-180608).
• net: mvmdio: add xmdio xsmi support (bsc#1098633).
• net: mvmdio: check the MIIADDRC45 bit is not set for smi operations (bsc#1098633).
• net: mvmdio: introduce an ops structure (bsc#1098633).
• net: mvmdio: put the poll intervals in the ops structure (bsc#1098633).
• net: mvmdio: remove duplicate locking (bsc#1098633).
• net: mvmdio: reorder headers alphabetically (bsc#1098633).
• net: mvmdio: simplify the smi read and write error paths (bsc#1098633).
• net: mvmdio: use GENMASK for masks (bsc#1098633).
• net: mvmdio: use tabs for defines (bsc#1098633).
• net: mvpp2: Add hardware offloading for VLAN filtering (bsc#1098633).
• net: mvpp2: Add support for unicast filtering (bsc#1098633).
• net: mvpp2: Do not use dynamic allocs for local variables (bsc#1098633).
• net: mvpp2: Fix DMA address mask size (bsc#1098633).
• net: mvpp2: Fix TCAM filter reserved range (bsc#1098633).
• net: mvpp2: Fix clk error path in mvpp2_probe (bsc#1098633).
• net: mvpp2: Fix clock resource by adding an optional bus clock (bsc#1098633).
• net: mvpp2: Fix clock resource by adding missing mgcoreclk (bsc#1098633).
• net: mvpp2: Fix parser entry init boundary check (bsc#1098633).
• net: mvpp2: Make mvpp2prshw_read a parser entry init function (bsc#1098633).
• net: mvpp2: Prevent userspace from changing TX affinities (bsc#1098633).
• net: mvpp2: Simplify MAC filtering function parameters (bsc#1098633).
• net: mvpp2: Use relaxed I/O in data path (bsc#1098633).
• net: mvpp2: add comments about smpprocessorid() usage (bsc#1098633).
• net: mvpp2: add ethtool GOP statistics (bsc#1098633).
• net: mvpp2: add support for TX interrupts and RX queue distribution modes (bsc#1098633).
• net: mvpp2: adjust the coalescing parameters (bsc#1098633).
• net: mvpp2: align values in ethtool get_coalesce (bsc#1098633).
• net: mvpp2: allocate zeroed tx descriptors (bsc#1098633).
• net: mvpp2: check ethtool sets the Tx ring size is to a valid min value (bsc#1098633).
• net: mvpp2: cleanup probed ports in the probe error path (bsc#1098633).
• net: mvpp2: do not call txq_done from the Tx path when Tx irqs are used (bsc#1098633).
• net: mvpp2: do not disable GMAC padding (bsc#1098633).
• net: mvpp2: do not select the internal source clock (bsc#1098633).
• net: mvpp2: do not set GMAC autoneg when using XLG MAC (bsc#1098633).
• net: mvpp2: do not sleep in setrxmode (bsc#1098633).
• net: mvpp2: do not unmap TSO headers buffers (bsc#1098633).
• net: mvpp2: dynamic reconfiguration of the comphy/GoP/MAC (bsc#1098633).
• net: mvpp2: enable ACPI support in the driver (bsc#1098633).
• net: mvpp2: enable UDP/TCP checksum over IPv6 (bsc#1098633).
• net: mvpp2: enable basic 10G support (bsc#1098633).
• net: mvpp2: fallback using h/w and random mac if the dt one isn't valid (bsc#1098633).
• net: mvpp2: fix GOP statistics loop start and stop conditions (bsc#1098633).
• net: mvpp2: fix MVPP21ISRRXQGROUPREG definition (bsc#1098633).
• net: mvpp2: fix TSO headers allocation and management (bsc#1098633).
• net: mvpp2: fix invalid parameters order when calling the tcam init (bsc#1098633).
• net: mvpp2: fix parsing fragmentation detection (bsc#1098633).
• net: mvpp2: fix port list indexing (bsc#1098633).
• net: mvpp2: fix the RSS table entry offset (bsc#1098633).
• net: mvpp2: fix the packet size configuration for 10G (bsc#1098633).
• net: mvpp2: fix the synchronization module bypass macro name (bsc#1098633).
• net: mvpp2: fix the txq_init error path (bsc#1098633).
• net: mvpp2: fix typo in the tcam setup (bsc#1098633).
• net: mvpp2: fix use of the random mac address for PPv2.2 (bsc#1098633).
• net: mvpp2: improve the link management function (bsc#1098633).
• net: mvpp2: initialize the GMAC when using a port (bsc#1098633).
• net: mvpp2: initialize the GoP (bsc#1098633).
• net: mvpp2: initialize the RSS tables (bsc#1098633).
• net: mvpp2: initialize the Tx FIFO size (bsc#1098633).
• net: mvpp2: initialize the XLG MAC when using a port (bsc#1098633).
• net: mvpp2: initialize the comphy (bsc#1098633).
• net: mvpp2: introduce per-port nrxqs/ntxqs variables (bsc#1098633).
• net: mvpp2: introduce queue_vector concept (bsc#1098633).
• net: mvpp2: jumbo frames support (bsc#1098633).
• net: mvpp2: limit TSO segments and use stop/wake thresholds (bsc#1098633).
• net: mvpp2: make the phy optional (bsc#1098633).
• net: mvpp2: move from cpu-centric naming to 'software thread' naming (bsc#1098633).
• net: mvpp2: move the mac retrieval/copy logic into its own function (bsc#1098633).
• net: mvpp2: move the mii configuration in the ndo_open path (bsc#1098633).
• net: mvpp2: mvpp2checkhwbufnum() can be static (bsc#1098633).
• net: mvpp2: only free the TSO header buffers when it was allocated (bsc#1098633).
• net: mvpp2: remove RX queue group reset code (bsc#1098633).
• net: mvpp2: remove mvpp2poolrefill() (bsc#1098633).
• net: mvpp2: remove unused mvpp2bmcookiepoolset() function (bsc#1098633).
• net: mvpp2: remove useless goto (bsc#1098633).
• net: mvpp2: report the tx-usec coalescing information to ethtool (bsc#1098633).
• net: mvpp2: set maximum packet size for 10G ports (bsc#1098633).
• net: mvpp2: set the Rx FIFO size depending on the port speeds for PPv2.2 (bsc#1098633).
• net: mvpp2: simplify maintaining enabled ports' list (bsc#1098633).
• net: mvpp2: simplify the Tx desc set DMA logic (bsc#1098633).
• net: mvpp2: simplify the link_event function (bsc#1098633).
• net: mvpp2: software tso support (bsc#1098633).
• net: mvpp2: split the max ring size from the default one (bsc#1098633).
• net: mvpp2: take advantage of the is_rgmii helper (bsc#1098633).
• net: mvpp2: unify register definitions coding style (bsc#1098633).
• net: mvpp2: unify the txq size define use (bsc#1098633).
• net: mvpp2: update the BM buffer free/destroy logic (bsc#1098633).
• net: mvpp2: use a data size of 10kB for Tx FIFO on port 0 (bsc#1098633).
• net: mvpp2: use correct index on array mvpp2_pools (bsc#1098633).
• net: mvpp2: use device*/fwnode* APIs instead of of_* (bsc#1098633).
• net: mvpp2: use the GoP interrupt for link status changes (bsc#1098633).
• net: mvpp2: use the aggr txq size define everywhere (bsc#1098633).
• net: mvpp2: use the same buffer pool for all ports (bsc#1098633).
• net: phy: add XAUI and 10GBASE-KR PHY connection types (bsc#1098633).
• net: phy: broadcom: Fix auxiliary control register reads (networking-stable-180608).
• net: phy: broadcom: Fix bcmwriteexp() (networking-stable-180608).
• net: phy: dp83822: use BMCRANENABLE instead of BMSRANEGCAPABLE for DP83620 (networking-stable-180620).
• net: qed: use correct strncpy() size (bsc#1086314 bsc#1086313 bsc#1086301).
• net: qed: use correct strncpy() size (bsc#1086314 bsc#1086313 bsc#1086301).
• net: sched: red: avoid hashing NULL child (bsc#1056787).
• net: usb: cdcmbim: add flag FLAGSENDZLP (networking-stable-1806_08).
• netdev-FAQ: clarify DaveM's position for stable backports (networking-stable-180608).
• nfc: nfcmrvl_uart: fix device-node leak during probe (bsc#1051510).
• nfc: pn533: Fix wrong GFP flag usage (bsc#1051510).
• nfit, address-range-scrub: add module option to skip initial ars (bsc#1094119).
• nfit, address-range-scrub: determine one platform max_ars value (bsc#1094119).
• nfit, address-range-scrub: fix scrub in-progress reporting (bsc#1051510).
• nfit, address-range-scrub: introduce nfitspa->arsstate (bsc#1094119).
• nfit, address-range-scrub: rework and simplify ARS state machine (bsc#1094119).
• nfit: fix region registration vs block-data-window ranges (bsc#1051510).
• nfit: fix unchecked dereference in acpinfitctl (bsc#1051510).
• nvme-loop: add support for multiple ports (bsc#1054245).
• nvme.h: add AEN configuration symbols (bsc#1054245).
• nvme.h: add ANA definitions (bsc#1054245).
• nvme.h: add support for the log specific field (bsc#1054245).
• nvme.h: add the changed namespace list log (bsc#1054245).
• nvme.h: untangle AEN notice definitions (bsc#1054245).
• nvme/multipath: Disable runtime writable enabling parameter (bsc#1054245).
• nvme: Fix sync controller reset return (bsc#1077989).
• nvme: add ANA support (bsc#1054245).
• nvme: add bio remapping tracepoint (bsc#1054245).
• nvme: centralize ctrl removal prints (bsc#1054245).
• nvme: cleanup double shift issue (bsc#1054245).
• nvme: do not enable AEN if not supported (bsc#1077989).
• nvme: do not hold nvmftransportsrwsem for more than transport lookups (bsc#1054245).
• nvme: do not rely on the changed namespace list log (bsc#1054245).
• nvme: enforce 64bit offset for nvmegetlog_ext fn (bsc#1054245).
• nvme: fix handling of metadatalen for NVMEIOCTLIOCMD (,).
• nvme: fix handling of metadatalen for NVMEIOCTLIOCMD ().
• nvme: fix use-after-free in nvmefreens_head (bsc#1054245).
• nvme: guard additional fields in nvme command structures (bsc#1054245).
• nvme: host: core: fix precedence of ternary operator (bsc#1054245).
• nvme: if_ready checks to fail io to deleting controller (bsc#1077989).
• nvme: implement log page low/high offset and dwords (bsc#1054245).
• nvme: kABI fix for ANA support in nvme_ctrl (bsc#1054245).
• nvme: kABI fixes for nvmet_ctrl (bsc#1054245).
• nvme: kabi fixes for nvme_ctrl (bsc#1054245).
• nvme: make nvmegetlog_ext non-static (bsc#1054245).
• nvme: mark nvmequeuescan static (bsc#1054245).
• nvme: partially revert 'nvme: remove nvmereqneeds_failover' (bsc#1054245).
• nvme: reintruduce nvmegetlog_ext() (bsc#1054245).
• nvme: remove nvmereqneeds_failover (bsc#1054245).
• nvme: revert 'nvme: mark nvmequeuescan static' (bsc#1054245).
• nvme: simplify the API for getting log pages (bsc#1054245).
• nvme: submit AEN event configuration on startup (bsc#1054245).
• nvme: use the changed namespaces list log to clear ns data changed AENs (bsc#1054245).
• nvmet-fc: fix target sgl list on large transfers ().
• nvmet-fc: fix target sgl list on large transfers (,).
• nvmet: add AEN configuration support (bsc#1054245).
• nvmet: add a new nvmetzerosgl helper (bsc#1054245).
• nvmet: add minimal ANA support (bsc#1054245).
• nvmet: constify struct nvmetfabricsops (bsc#1054245).
• nvmet: filter newlines from user input (bsc#1054245).
• nvmet: fixup crash on NULL device path (bsc#1054245).
• nvmet: implement the changed namespaces log (bsc#1054245).
• nvmet: kABI fixes for ANA support (bsc#1054245).
• nvmet: keep a port pointer in nvmet_ctrl (bsc#1054245).
• nvmet: mask pending AENs (bsc#1054245).
• nvmet: reset keep alive timer in controller enable (bsc#1054245).
• nvmet: return all zeroed buffer when we can't find an active namespace (bsc#1054245).
• nvmet: revert 'nvmet: constify struct nvmetfabricsops' (bsc#1054245).
• nvmet: split log page implementation (bsc#1054245).
• nvmet: support configuring ANA groups (bsc#1054245).
• nvmet: track and limit the number of namespaces per subsystem (1054245).
• nvmet: use Retain Async Event bit to clear AEN (bsc#1054245).
• of/pci: Fix theoretical NULL dereference (bsc#1051510).
• of: Make offwnodehandle() safer (bsc#1098633).
• of: fix DMA mask generation (bsc#1051510).
• of: restrict DMA configuration (bsc#1051510).
• pci: Account for all bridges on bus when distributing bus numbers (bsc#1100132).
• pci: altera: Fix bool initialization in tlpreadpacket() (bsc#1051510).
• pci: dwc: Fix enumeration end when reaching root subordinate (bsc#1100132).
• pci: endpoint: Fix kernel panic after put_device() (bsc#1051510).
• pci: endpoint: Populate funcno before calling pciepcaddepf() (bsc#1051510).
• pci: exynos: Fix a potential initclkresources NULL pointer dereference (bsc#1051510).
• pci: faraday: Fix ofirqget() error check (bsc#1051510).
• pci: ibmphp: Fix use-before-set in getmaxbus_speed() (bsc#1051510).
• pci: shpchp: Fix AMD POGO identification (bsc#1051510).
• perf intel-pt: Always set no branch for dummy event (bsc#1087217).
• perf intel-pt: Set noauxsamples for the tracking event (bsc#1087217).
• perf/x86/intel/uncore: Add event constraint for BDX PCU (bsc#1087202).
• perf/x86/intel/uncore: Fix SKX CHA event extra regs (bsc#1087233).
• perf/x86/intel/uncore: Fix Skylake UPI pmU event masks (bsc#1087233).
• perf/x86/intel/uncore: Fix Skylake server CHA LLC_LOOKUP event umask (bsc#1087233).
• perf/x86/intel/uncore: Fix Skylake server PCU pmU event format (bsc#1087233).
• perf/x86/intel/uncore: Fix missing marker for skxuncorechaextraregs (bsc#1087233).
• perf/x86/intel/uncore: Remove invalid Skylake server CHA filter field (bsc#1087233).
• perf/x86: Fix data source decoding for Skylake ().
• perf/x86: Fix data source decoding for Skylake ().
• phy: add sgmii and 10gkr modes to the phy_mode enum (bsc#1098633).
• pinctrl: bcm2835: Avoid warning from _irqdosethandler (bsc#1051510).
• pinctrl: imx: fix debug message for SHAREMUXCONF_REG case (bsc#1051510).
• pinctrl: intel: Initialize GPIO properly when used through irqchip (bsc#1087092).
• pinctrl: intel: Read back TX buffer state (bsc#1051510).
• pinctrl: meson-gxbb: remove non-existing pin GPIOX_22 (bsc#1051510).
• pinctrl: meson-gxl: Fix typo in AO I2S pins (bsc#1051510).
• pinctrl: meson-gxl: Fix typo in AO SPDIF pins (bsc#1051510).
• pinctrl: mvebu: use correct MPP sel value for dev pins (bsc#1051510).
• pinctrl: nand: meson-gxbb: fix missing data pins (bsc#1051510).
• pinctrl: nsp: Fix potential NULL dereference (bsc#1051510).
• pinctrl: nsp: off by ones in nsppinmuxenable() (bsc#1100132).
• pinctrl: pinctrl-single: Fix pcsrequestgpio() when bitspermux != 0 (bsc#1051510).
• pinctrl: sh-pfc: r8a7790: Add missing TXER pin to avbmii group (bsc#1051510).
• pinctrl: sh-pfc: r8a7795: Fix MOD_SEL register pin assignment for SSI pins group (bsc#1051510).
• pinctrl: sh-pfc: r8a7795: Fix to delete A20..A25 pins function definitions (bsc#1051510).
• pinctrl: sh-pfc: r8a7796: Fix IPSR and MOD_SEL register pin assignment for NDFC pins group (bsc#1051510).
• pinctrl: sh-pfc: r8a7796: Fix to delete A20..A25 pins function definitions (bsc#1051510).
• pinctrl: sh-pfc: r8a7796: Fix to delete FSCLKST pin and IPSR7 bit[15:12] register definitions (bsc#1051510).
• pinctrl: sunxi: fix V3s pinctrl driver IRQ bank base (bsc#1051510).
• pinctrl: sunxi: fix wrong irq_banks number for H5 pinctrl (bsc#1051510).
• pinctrl: uniphier: fix members of rmii group for Pro4 (bsc#1051510).
• pinctrl: uniphier: fix pinconfigget() for input-enable (bsc#1051510).
• pm/core: Fix supplier device runtime pm usage counter imbalance (bsc#1051510).
• pm/hibernate: Fix oops at snapshot_write() (bsc#1051510).
• pm/hibernate: Use CONFIGHAVESET_MEMORY for include condition (bsc#1051510).
• pm/wakeup: Only update last time for active wakeup sources (bsc#1051510).
• power: gemini-poweroff: Avoid spurious poweroff (bsc#1051510).
• power: supply: act8945acharger: fix ofirq_get() error check (bsc#1051510).
• power: supply: cpcap-charger: add OMAP_usb2 dependency (bsc#1051510).
• powerpc/64: Fix smp_wmb barrier definition use use lwsync consistently (bnc#1012382).
• powerpc/64s: Clear PCR on boot (bnc#1012382).
• powerpc/64s: Fix section mismatch warnings from setuprfiflush() (bsc#1068032, bsc#1075087, bsc#1091041).
• powerpc/eeh: Fix enabling bridge MMIO windows (bnc#1012382).
• powerpc/fadump: Unregister fadump on kexec down path (bnc#1012382).
• powerpc/mm/hash: Add missing isync prior to kernel stack SLB switch (bnc#1012382).
• powerpc/mpic: Check if cpupossible() in mpicphysmask() (bnc#1012382).
• powerpc/powernv: Fix NVRAM sleep in invalid context when crashing (bnc#1012382).
• powerpc/powernv: Fix OPAL NVRAM driver OPAL_BUSY loops (bnc#1012382).
• powerpc/powernv: Handle unknown OPAL errors in opalnvramwrite() (bnc#1012382).
• powerpc/powernv: define a standard delay for OPAL_BUSY type retry loops (bnc#1012382).
• powerpc/ptrace: Fix setting 512B aligned breakpoints with PTRACESETDEBUGREG (bnc#1012382).
• powerpc: Add missing prototype for archirqwork_raise() (bnc#1012382).
• pwm: meson: Fix allocation of PWM channel array (bsc#1051510).
• pwm: meson: Improve PWM calculation precision (bsc#1051510).
• pwm: stm32: Enforce dependency on CONFIGMFDSTM32_TIMERS (bsc#1051510).
• pwm: stm32: Remove unused struct device (bsc#1051510).
• pwm: tiehrpwm: Fix runtime pm imbalance at unbind (bsc#1051510).
• pwm: tiehrpwm: fix clock imbalance in probe error path (bsc#1051510).
• qed* : Add new TLV to request PF to update MAC in bulletin board (bsc#1086314 bsc#1086313 bsc#1086301).
• qed* : use trust mode to allow VF to override forced MAC (bsc#1086314 bsc#1086313 bsc#1086301).
• qed*: Add new TLV to request PF to update MAC in bulletin board (bsc#1086314 bsc#1086313 bsc#1086301).
• qed*: Advance drivers' version to 8.33.0.20 (bsc#1086314).
• qed*: Advance drivers' version to 8.33.0.20 (bsc#1086314).
• qed*: HSI renaming for different types of HW (bsc#1086314 bsc#1086313 bsc#1086301).
• qed*: HSI renaming for different types of HW (bsc#1086314 bsc#1086313 bsc#1086301).
• qed*: Refactor mf_mode to consist of bits (bsc#1086314 bsc#1086313 bsc#1086301).
• qed*: Refactor mf_mode to consist of bits (bsc#1086314 bsc#1086313 bsc#1086301).
• qed*: Refactoring and rearranging FW API with no functional impact (bsc#1086314 bsc#1086313 bsc#1086301).
• qed*: Refactoring and rearranging FW API with no functional impact (bsc#1086314 bsc#1086313 bsc#1086301).
• qed*: Support drop action classification (bsc#1086314 bsc#1086313 bsc#1086301).
• qed*: Support drop action classification (bsc#1086314 bsc#1086313 bsc#1086301).
• qed*: Support other classification modes (bsc#1086314 bsc#1086313 bsc#1086301).
• qed*: Support other classification modes (bsc#1086314 bsc#1086313 bsc#1086301).
• qed*: Utilize FW 8.33.1.0 (bsc#1086314 bsc#1086313 bsc#1086301).
• qed*: Utilize FW 8.33.1.0 (bsc#1086314 bsc#1086313 bsc#1086301).
• qed*: Utilize FW 8.33.11.0 (bsc#1086314 bsc#1086313 bsc#1086301).
• qed*: Utilize FW 8.33.11.0 (bsc#1086314 bsc#1086313 bsc#1086301).
• qed*: use trust mode to allow VF to override forced MAC (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Adapter flash update support (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Adapter flash update support (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Add APIs for flash access (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Add APIs for flash access (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Add MFW interfaces for TLV request support (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Add MFW interfaces for TLV request support (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Add configuration information to register dump and debug data (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Add configuration information to register dump and debug data (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Add driver infrastucture for handling mfw requests (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Add driver infrastucture for handling mfw requests (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Add sanity check for SIMD fastpath handler (bsc#1050536).
• qed: Add sanity check for SIMD fastpath handler (bsc#1050536).
• qed: Add support for Unified Fabric Port (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Add support for Unified Fabric Port (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Add support for multi function mode with 802.1ad tagging (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Add support for multi function mode with 802.1ad tagging (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Add support for processing fcoe tlv request (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Add support for processing fcoe tlv request (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Add support for processing iscsi tlv request (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Add support for processing iscsi tlv request (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Add support for tlv request processing (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Add support for tlv request processing (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Correct Multicast API to reflect existence of 256 approximate buckets (bsc#1050536).
• qed: Correct Multicast API to reflect existence of 256 approximate buckets (bsc#1050536).
• qed: Delete unused parameter p_ptt from mcp APIs (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Delete unused parameter p_ptt from mcp APIs (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Do not advertise DCBXLLDMANAGED capability (bsc#1050536).
• qed: Do not advertise DCBXLLDMANAGED capability (bsc#1050536).
• qed: Fix LL2 race during connection terminate (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Fix LL2 race during connection terminate (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Fix PTT entry leak in the selftest error flow (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Fix PTT entry leak in the selftest error flow (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Fix copying 2 strings (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Fix copying 2 strings (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Fix link flap issue due to mismatching EEE capabilities (bsc#1050536).
• qed: Fix link flap issue due to mismatching EEE capabilities (bsc#1050536).
• qed: Fix mask for physical address in ILT entry (networking-stable-180608).
• qed: Fix possibility of list corruption during rmmod flows (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Fix possibility of list corruption during rmmod flows (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Fix possible memory leak in Rx error path handling (bsc#1050536).
• qed: Fix possible memory leak in Rx error path handling (bsc#1050536).
• qed: Fix possible race for the link state value (bsc#1050536).
• qed: Fix possible race for the link state value (bsc#1050536).
• qed: Fix potential use-after-free in qedspqpost() (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Fix potential use-after-free in qedspqpost() (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Fix reading stale configuration information (bsc#1086314).
• qed: Fix reading stale configuration information (bsc#1086314).
• qed: Fix setting of incorrect eswitch mode (bsc#1050536).
• qed: Fix setting of incorrect eswitch mode (bsc#1050536).
• qed: Fix shared memory inconsistency between driver and the MFW (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Fix shared memory inconsistency between driver and the MFW (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Fix use of incorrect shmem address (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Fix use of incorrect shmem address (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Fix use of incorrect size in memcpy call (bsc#1050536).
• qed: Fix use of incorrect size in memcpy call (bsc#1050536).
• qed: Free reserved MR tid (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Free reserved MR tid (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: LL2 flush isles when connection is closed (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: LL2 flush isles when connection is closed (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Limit msix vectors in kdump kernel to the minimum required count (bsc#1050536).
• qed: Limit msix vectors in kdump kernel to the minimum required count (bsc#1050536).
• qed: Populate nvm image attribute shadow (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Populate nvm image attribute shadow (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Remove reserveration of dpi for kernel (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Remove reserveration of dpi for kernel (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Remove unused data member 'ismfdefault' (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Remove unused data member 'ismfdefault' (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Use true and false for boolean values (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Use true and false for boolean values (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Use zeroing memory allocator than allocator/memset (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: Use zeroing memory allocator than allocator/memset (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: code indent should use tabs where possible (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: code indent should use tabs where possible (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: fix spelling mistake: 'checksumed' -> 'checksummed' (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: fix spelling mistake: 'checksumed' -> 'checksummed' (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: fix spelling mistake: 'offloded' -> 'offloaded' (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: fix spelling mistake: 'offloded' -> 'offloaded' (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: fix spelling mistake: 'taskelt' -> 'tasklet' (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: fix spelling mistake: 'taskelt' -> 'tasklet' (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: off by one in qedparsemcptracebuf() (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: off by one in qedparsemcptracebuf() (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: use kzalloc instead of kmalloc and memset (bsc#1086314 bsc#1086313 bsc#1086301).
• qed: use kzalloc instead of kmalloc and memset (bsc#1086314 bsc#1086313 bsc#1086301).
• qede: Add build_skb() support (bsc#1086314 bsc#1086313 bsc#1086301).
• qede: Add build_skb() support (bsc#1086314 bsc#1086313 bsc#1086301).
• qede: Add support for populating ethernet TLVs (bsc#1086314 bsc#1086313 bsc#1086301).
• qede: Add support for populating ethernet TLVs (bsc#1086314 bsc#1086313 bsc#1086301).
• qede: Adverstise software timestamp caps when PHC is not available (bsc#1050538).
• qede: Adverstise software timestamp caps when PHC is not available (bsc#1050538).
• qede: Do not drop rx-checksum invalidated packets (bsc#1086314 bsc#1086313 bsc#1086301).
• qede: Do not drop rx-checksum invalidated packets (bsc#1086314 bsc#1086313 bsc#1086301).
• qede: Ethtool flash update support (bsc#1086314 bsc#1086313 bsc#1086301).
• qede: Ethtool flash update support (bsc#1086314 bsc#1086313 bsc#1086301).
• qede: Fix barrier usage after tx doorbell write (bsc#1086314 bsc#1086313 bsc#1086301).
• qede: Fix barrier usage after tx doorbell write (bsc#1086314 bsc#1086313 bsc#1086301).
• qede: Fix ref-cnt usage count (bsc#1086314 bsc#1086313 bsc#1086301).
• qede: Fix ref-cnt usage count (bsc#1086314 bsc#1086313 bsc#1086301).
• qede: Refactor ethtool rx classification flow (bsc#1086314 bsc#1086313 bsc#1086301).
• qede: Refactor ethtool rx classification flow (bsc#1086314 bsc#1086313 bsc#1086301).
• qede: Support flow classification to the VFs (bsc#1086314 bsc#1086313 bsc#1086301).
• qede: Support flow classification to the VFs (bsc#1086314 bsc#1086313 bsc#1086301).
• qede: Use NETIFFGRO_HW (bsc#1086314 bsc#1086313 bsc#1086301).
• qede: Use NETIFFGRO_HW (bsc#1086314 bsc#1086313 bsc#1086301).
• qede: Validate unsupported configurations (bsc#1086314 bsc#1086313 bsc#1086301).
• qede: Validate unsupported configurations (bsc#1086314 bsc#1086313 bsc#1086301).
• qede: fix spelling mistake: 'registeration' -> 'registration' (bsc#1086314 bsc#1086313 bsc#1086301).
• qede: fix spelling mistake: 'registeration' -> 'registration' (bsc#1086314 bsc#1086313 bsc#1086301).
• qedr: Fix spelling mistake: 'hanlde' -> 'handle' (bsc#1086314 bsc#1086313 bsc#1086301).
• qedr: Fix spelling mistake: 'hanlde' -> 'handle' (bsc#1086314 bsc#1086313 bsc#1086301).
• qlogic/qed: Constify *pkttypestr (bsc#1086314 bsc#1086313 bsc#1086301).
• qlogic/qed: Constify *pkttypestr (bsc#1086314 bsc#1086313 bsc#1086301).
• qlogic: check kstrtoul() for errors (bsc#1050540).
• qlogic: check kstrtoul() for errors (bsc#1050540).
• qmi_wwan: add support for Quectel EG91 (bsc#1051510).
• qmi_wwan: add support for the Dell Wireless 5821e module (bsc#1051510).
• qmi_wwan: fix interface number for DW5821e production firmware (bsc#1051510).
• qmiwwan: set FLAGSEND_ZLP to avoid network initiated disconnect (bsc#1051510).
• r8152: fix tx packets accounting (bsc#1051510).
• r8152: napi hangup fix after disconnect (bsc#1051510).
• r8169: Be drop monitor friendly (bsc#1051510).
• rbd: flush rbddev->watchdwork after watch is unregistered (bsc#1103216).
• rdma/cma: Do not query GID during QP state transition to RTR (bsc#1046306).
• rdma/cma: Do not query GID during QP state transition to RTR (bsc#1046306).
• rdma/cma: Fix use after destroy access to net namespace for IPoib (bsc#1046306).
• rdma/cma: Fix use after destroy access to net namespace for IPoib (bsc#1046306).
• rdma/cxgb4: Use structs to describe the uABI instead of opencoding (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• rdma/cxgb4: release hw resources on device removal (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• rdma/i40iw: Avoid panic when objects are being created and destroyed (bsc#1058659).
• rdma/i40iw: Avoid panic when objects are being created and destroyed (bsc#1058659).
• rdma/i40iw: Avoid reference leaks when processing the AEQ (bsc#1058659).
• rdma/i40iw: Avoid reference leaks when processing the AEQ (bsc#1058659).
• rdma/ipoib: Update paths on CLIENTREREG/SMCHANGE events (bsc#1046307).
• rdma/ipoib: Update paths on CLIENTREREG/SMCHANGE events (bsc#1046307).
• rdma/iwpm: fix memory leak on map_info (bsc#1046306).
• rdma/iwpm: fix memory leak on map_info (bsc#1046306).
• rdma/mlx4: Discard unknown SQP work requests (bsc#1046302).
• rdma/mlx4: Discard unknown SQP work requests (bsc#1046302).
• rdma/mlx5: Do not assume that medium blueFlame register exists (bsc#1046305).
• rdma/mlx5: Do not assume that medium blueFlame register exists (bsc#1046305).
• rdma/mlx5: Fix NULL dereference while accessing XRC_TGT QPs (bsc#1046305).
• rdma/mlx5: Fix NULL dereference while accessing XRC_TGT QPs (bsc#1046305).
• rdma/mlx5: Fix memory leak in mlx5ibcreate_srq() error path (bsc#1046305).
• rdma/mlx5: Fix memory leak in mlx5ibcreate_srq() error path (bsc#1046305).
• rdma/mlx5: Fix multiple NULL-ptr deref errors in rereg_mr flow (bsc#1046305).
• rdma/mlx5: Fix multiple NULL-ptr deref errors in rereg_mr flow (bsc#1046305).
• rdma/mlx5: Protect from shift operand overflow (bsc#1046305).
• rdma/mlx5: Protect from shift operand overflow (bsc#1046305).
• rdma/mlx5: Use proper spec flow label type (bsc#1046305).
• rdma/mlx5: Use proper spec flow label type (bsc#1046305).
• rdma/qedr: Annotate iomem pointers correctly (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Annotate iomem pointers correctly (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Declare local functions static (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Declare local functions static (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Fix doorbell bar mapping for dpi > 1 (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Fix doorbell bar mapping for dpi > 1 (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Fix endian problems around imm_data (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Fix endian problems around imm_data (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Fix iWARP connect with port mapper (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Fix iWARP connect with port mapper (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Fix iWARP write and send with immediate (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Fix iWARP write and send with immediate (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Fix ipv6 destination address resolution (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Fix ipv6 destination address resolution (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Fix kernel panic when running fio over NFSordma (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Fix kernel panic when running fio over NFSordma (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Fix wmb usage in qedr (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Fix wmb usage in qedr (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Remove set-but-not-used variables (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Remove set-but-not-used variables (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Use NULL instead of 0 to represent a pointer (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Use NULL instead of 0 to represent a pointer (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Use zeroing memory allocator than allocator/memset (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Use zeroing memory allocator than allocator/memset (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Zero stack memory before copying to user space (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: Zero stack memory before copying to user space (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: eliminate duplicate barriers on weakly-ordered archs (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: eliminate duplicate barriers on weakly-ordered archs (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: lower print level of flushed CQEs (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/qedr: lower print level of flushed CQEs (bsc#1086314 bsc#1086313 bsc#1086301).
• rdma/ucma: Do not allow setting rdmaOPTIONib_PATH without an rdma device (bsc#1046306).
• rdma/ucma: Do not allow setting rdmaOPTIONib_PATH without an rdma device (bsc#1046306).
• rdma/ucma: ucma_context reference leak in error path (bsc#1046306).
• rdma/ucma: ucma_context reference leak in error path (bsc#1046306).
• rdma/uverbs: Protect from attempts to create flows on unsupported QP (bsc#1046306).
• rdma/uverbs: Protect from attempts to create flows on unsupported QP (bsc#1046306).
• rdma/uverbs: Use an unambiguous errno for method not supported (bsc#1046306).
• rdma/uverbs: Use an unambiguous errno for method not supported (bsc#1046306).
• regulator: max8998: Fix platform data retrieval (bsc#1051510).
• regulator: qcom_spmi: Include offset when translating voltages (bsc#1051510).
• regulator: tps65218: Fix strobe assignment (bsc#1051510).
• rpm/kernel-source.spec.in: Add more stuff to Recommends ... and move bc to Recommends as well. All these packages are needed for building a kernel manually from scratch with kernel-source files.
• rpm/kernel-source.spec.in: require bc for kernel-source This is needed for building include/generated/timeconst.h from kernel/time/timeconst.bc.
• rtc: ac100: Fix ac100 determine rate bug (bsc#1051510).
• rtc: pxa: fix probe function (bsc#1051510).
• rtlwifi: Fix kernel Oops 'Fw download fail!!' (bsc#1051510).
• rtlwifi: rtl8821ae: fix firmware is not ready to run (bsc#1051510).
• rtnetlink: validate attributes in dosetlink() (networking-stable-1806_08).
• s390/crc32-vx: use expoline for indirect branches (git-fixes f19fbd5ed6).
• s390/ftrace: use expoline for indirect branches (git-fixes f19fbd5ed6).
• s390/gs: add compat regset for the guarded storage broadcast control block (git-fixes e525f8a6e696).
• s390/kernel: use expoline for indirect branches (git-fixes f19fbd5ed6).
• s390/lib: use expoline for indirect branches (git-fixes f19fbd5ed6).
• s390/qdio: do not retry EQBS after CCQ 96 (bsc#1102088, LTC#169699).
• s390/qeth: fix error handling in adapter command callbacks (bsc#1102088, LTC#169699).
• s390/qeth: fix race when setting MAC address (bnc#1093148, LTC#167307).
• s390: Correct register corruption in critical section cleanup (git-fixes 6dd85fbb87).
• s390: add assembler macros for CPU alternatives (git-fixes f19fbd5ed6).
• s390: correct module section names for expoline code revert (git-fixes f19fbd5ed6).
• s390: extend expoline to BC instructions (git-fixes, bsc#1103421).
• s390: move expoline assembler macros to a header (git-fixes f19fbd5ed6).
• s390: move spectre sysfs attribute code (bsc#1090098).
• s390: optimize memset implementation (git-fixes f19fbd5ed6).
• s390: remove indirect branch from dosoftirqown_stack (git-fixes f19fbd5ed6).
• s390: use expoline thunks in the BPF JIT (git-fixes, bsc#1103421).
• sched/core: Optimize ttwu_stat() (bnc#1101669 optimise numa balancing for fast migrate).
• sched/core: Optimize updatestats*() (bnc#1101669 optimise numa balancing for fast migrate).
• scripts/dtc: fix '%zx' warning (bsc#1051510).
• scripts/gdb/linux/tasks.py: fix getthreadinfo (bsc#1051510).
• scripts/gitsort/gitsort.py: Add 'nvme-4.18' to the list of repositories
• scripts/gitsort/gitsort.py: add modules-next tree
• scripts/kernel-doc: Do not fail with status != 0 if error encountered with -none (bsc#1051510).
• scsi: aacraid: Correct hbasend to include iutype (bsc#1077989).
• scsi: core: clean up generated file scsidevinfotbl.c (bsc#1077989).
• scsi: cxgb4i: silence overflow warning in t4uldrx_handler() (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• scsi: megaraid_sas: Do not log an error if FW successfully initializes (bsc#1077989).
• scsi: qla2xxx: Fix inconsistent DMA mem alloc/free (bsc#1077989).
• scsi: qla2xxx: Fix kernel crash due to late workqueue allocation (bsc#1077338).
• scsi: zfcp: fix infinite iteration on ERP ready list (bsc#1102088, LTC#169699).
• scsi: zfcp: fix misleading REC trigger trace where erp_action setup failed (bsc#1102088, LTC#169699).
• scsi: zfcp: fix missing REC trigger trace for all objects in ERP_FAILED (bsc#1102088, LTC#169699).
• scsi: zfcp: fix missing REC trigger trace on enqueue without ERP thread (bsc#1102088, LTC#169699).
• scsi: zfcp: fix missing REC trigger trace on terminaterportio early return (bsc#1102088, LTC#169699).
• scsi: zfcp: fix missing REC trigger trace on terminaterportio for ERP_FAILED (bsc#1102088, LTC#169699).
• scsi: zfcp: fix missing SCSI trace for result of ehhostreset_handler (bsc#1102088, LTC#169699).
• scsi: zfcp: fix missing SCSI trace for retry of abort / scsi_eh TMF (bsc#1102088, LTC#169699).
• sctp: not allow transport timeout value less than HZ/5 for hbtimer (networking-stable-1806_08).
• serial: earlycon: Only try fdt when specify 'earlycon' exactly (bsc#1051510).
• serial: imx: drop if that always evaluates to true (bsc#1051510).
• serial: pxa: Fix out-of-bounds access through serial port index (bsc#1051510).
• serial: sh-sci: Update warning message in scirequestdma_chan() (bsc#1051510).
• serial: sh-sci: Use spin{try}lockirqsave instead of open coding version (bsc#1051510).
• serial: sirf: Fix out-of-bounds access through DT alias (bsc#1051510).
• sfc: stop the TX queue before pushing new buffers (bsc#1058169).
• sfc: stop the TX queue before pushing new buffers (bsc#1058169).
• smsc75xx: Add workaround for gigabit link up hardware errata (bsc#1051510).
• smsc75xx: fix smsc75xxsetfeatures() (bsc#1051510).
• smsc95xx: Configure pause time to 0xffff when tx flow control enabled (bsc#1051510).
• socket: close race condition between sockclose() and sockfssetattr() (networking-stable-180620).
• spi: bcm-qspi: fIX some error handling paths (bsc#1051510).
• spi: core: Fix devmspiregister_master() function name in kerneldoc (bsc#1051510).
• spi: pxa2xx: Do not touch CS pin until we have a transfer pending (bsc#1051510).
• spi: sh-msiof: Fix bit field overflow writes to TSCR/RSCR (bsc#1051510).
• staging: comedi: quatechdaqpcs: fix no-op loop daqpaoinsn_write() (bsc#1051510).
• staging: fbtft: array underflow in fbtftrequestgpios_match() (bsc#1051510).
• staging: iio: ade7759: fix signed extension bug on shift of a u8 (bsc#1051510).
• staging: rtl8723bs: Prevent an underflow in rtwcheckbeacon_data() (bsc#1051510).
• staging: rtl8723bs: add missing range check on id (bsc#1051510).
• staging: rtl8723bs: fix u8 less than zero check (bsc#1051510).
• staging: rts5208: Fix 'segno' calculation in resetms_card() (bsc#1051510).
• staging: sm750fb: Fix parameter mistake in poke32 (bsc#1051510).
• staging:iio:ade7854: Fix error handling on read/write (bsc#1051510).
• staging:iio:ade7854: Fix the wrong number of bits to read (bsc#1051510).
• tcp: verify the checksum of the first data segment in a new connection (networking-stable-180620).
• team: use netdevfeaturest instead of u32 (networking-stable-180608).
• thermal/drivers/hisi: Fix kernel panic on alarm interrupt (bsc#1051510).
• thermal/drivers/hisi: Fix missing interrupt enablement (bsc#1051510).
• thermal/drivers/hisi: Fix multiple alarm interrupts firing (bsc#1051510).
• thermal/drivers/hisi: Simplify the temperature/step computation (bsc#1051510).
• thermal: bcm2835: fix an error code in probe() (bsc#1051510).
• thermal: fix INTELSOCDTSIOSFCORE dependencies (bsc#1051510).
• time: Make sure jiffiestomsecs() preserves non-zero time periods (bsc#1051510).
• timekeeping: Use proper timekeeper for debug code (bsc#1051510).
• tools lib traceevent: Fix getfieldstr() for dynamic strings (bsc#1051510).
• tools lib traceevent: Simplify pointer print logic and fix %pF (bsc#1051510).
• tools/lib/lockdep: Define the ARRAY_SIZE() macro (bsc#1051510).
• tools/lib/lockdep: Fix undefined symbol prandom_u32 (bsc#1051510).
• tools/libbpf: handle issues with bpf ELF objects containing .eh_frames (bsc#1051510).
• tools/power turbostat: Correct SNBC1/C3AUTO_UNDEMOTE defines (bsc#1051510).
• tools/thermal: tmon: fix for segfault (bsc#1051510).
• tools/usbip: fixes build with musl libc toolchain (bsc#1051510).
• ubi: fastmap: Correctly handle interrupted erasures in EBA (bsc#1051510).
• ubifs: Fix data node size for truncating uncompressed nodes (bsc#1051510).
• ubifs: Fix potential integer overflow in allocation (bsc#1051510).
• ubifs: Fix uninitialized variable in searchdhcookie() (bsc#1051510).
• ubifs: Fix unlink code wrt. double hash lookups (bsc#1051510).
• udp: fix rx queue len reported by diag and proc interface (networking-stable-180620).
• usb-storage: Add compatibility quirk flags for G-Technologies G-Drive (bsc#1051510).
• usb-storage: Add support for FLALWAYSSYNC flag in the UAS driver (bsc#1051510).
• usb/gadget: Fix 'high bandwidth' check in usbgadgetepmatchdesc() (bsc#1051510).
• usb: Increment wakeup count on remote wakeup (bsc#1051510).
• usb: OHCI: Fix NULL dereference in HCDs using HCDLOCALMEM (bsc#1087092).
• usb: audio-v2: Correct the comment for struct uacclockselector_descriptor (bsc#1051510).
• usb: cdc_acm: Add quirk for Castles VEGA3000 (bsc#1051510).
• usb: cdc_acm: Add quirk for Uniden UBC125 scanner (bsc#1051510).
• usb: cdc_acm: prevent race at write to acm while system resumes (bsc#1087092).
• usb: core: handle hub CPORTOVER_CURRENT condition (bsc#1051510).
• usb: do not reset if a low-speed or full-speed device timed out (bsc#1051510).
• usb: dwc2: Fix DMA alignment to start at allocated boundary (bsc#1051510).
• usb: dwc2: Fix dwc2hsotgcoreinitdisconnected() (bsc#1051510).
• usb: dwc2: Improve gadget state disconnection handling (bsc#1085539).
• usb: dwc2: debugfs: Do not touch RX FIFO during register dump (bsc#1051510).
• usb: dwc2: fix the incorrect bitmaps for the ports of multi_tt hub (bsc#1051510).
• usb: dwc2: hcd: Fix host channel halt flow (bsc#1051510).
• usb: dwc2: host: Fix transaction errors in host mode (bsc#1051510).
• usb: dwc3: Add SoftReset PHY synchonization delay (bsc#1051510).
• usb: dwc3: Fix GDBGFIFOSPACE_TYPE values (bsc#1051510).
• usb: dwc3: Makefile: fix link error on randconfig (bsc#1051510).
• usb: dwc3: Undo PHY init if soft reset fails (bsc#1051510).
• usb: dwc3: Update DWC_usb31 GTXFIFOSIZ reg fields (bsc#1051510).
• usb: dwc3: ep0: Reset TRB counter for ep0 IN (bsc#1051510).
• usb: dwc3: gadget: Fix listdel corruption in dwc3ep_dequeue (bsc#1051510).
• usb: dwc3: gadget: Set maxpacket size for ep0 IN (bsc#1051510).
• usb: dwc3: of-simple: fix use-after-free on remove (bsc#1051510).
• usb: dwc3: omap: do not miss events during suspend/resume (bsc#1051510).
• usb: dwc3: pci: Properly cleanup resource (bsc#1051510).
• usb: dwc3: prevent setting PRTCAP to OTG from debugfs (bsc#1051510).
• usb: gadget: bdc: 64-bit pointer capability check (bsc#1051510).
• usb: gadget: composite: fix incorrect handling of OS desc requests (bsc#1051510).
• usb: gadget: core: Fix use-after-free of usb_request (bsc#1051510).
• usb: gadget: dummy: fix nonsensical comparisons (bsc#1051510).
• usb: gadget: ffs: Fix use-after-free in ffsfskillsb() (bsc#1051510).
• usb: gadget: f_fs: Only return delayed status when len is 0 (bsc#1051510).
• usb: gadget: f_fs: Process all descriptors during bind (bsc#1051510).
• usb: gadget: ffs: Use configepbyspeed() (bsc#1051510).
• usb: gadget: fmassstorage: Fix the logic to iterate all common->luns (bsc#1051510).
• usb: gadget: fmidi: fixing a possible double-free in fmidi (bsc#1051510).
• usb: gadget: f_uac2: fix bFirstInterface in composite gadget (bsc#1051510).
• usb: gadget: fuac2: fix endianness of 'struct cntrl*_lay3' (bsc#1051510).
• usb: gadget: fuac2: fix error handling in afuncbind (again) (bsc#1051510).
• usb: gadget: ffs: Execute copytouser() with USER_DS set (bsc#1051510).
• usb: gadget: ffs: Let setup() return usbGADGETDELAYED_STATUS (bsc#1051510).
• usb: gadget: fsludccore: fix ep valid checks (bsc#1051510).
• usb: gadget: udc: Add missing platformdeviceput() on error in bdcpciprobe() (bsc#1051510).
• usb: gadget: udc: change comparison to bitshift when dealing with a mask (bsc#1051510).
• usb: gadget: udc: core: update usbepqueue() documentation (bsc#1051510).
• usb: gadget: udc: renesas_usb3: disable the controller's irqs for reconnecting (bsc#1051510).
• usb: host: ehci: use correct device pointer for dma ops (bsc#1087092).
• usb: host: xhci-plat: revert 'usb: host: xhci-plat: enable clk in resume timing' (bsc#1051510).
• usb: ldusb: add PIDs for new CASSY devices supported by this driver (bsc#1051510).
• usb: musb: Fix external abort in musb_remove on omap2430 (bsc#1051510).
• usb: musb: call pmruntime{get,put}_sync before reading vbus registers (bsc#1051510).
• usb: musb: fix enumeration after resume (bsc#1051510).
• usb: musb: fix remote wakeup racing with suspend (bsc#1051510).
• usb: musb: gadget: misplaced out of bounds check (bsc#1051510).
• usb: musb: host: fix potential NULL pointer dereference (bsc#1051510).
• usb: musb: trace: fix NULL pointer dereference in musbgtx() (bsc#1051510).
• usb: option: Add support for FS040U modem (bsc#1087092).
• usb: quirks: add delay quirks for Corsair Strafe (bsc#1051510).
• usb: serial: ch341: fix type promotion bug in ch341controlin() (bsc#1051510).
• usb: serial: cp210x: add CESINEL device ids (bsc#1051510).
• usb: serial: cp210x: add ELDAT Easywave RX09 id (bsc#1051510).
• usb: serial: cp210x: add ID for NI usb serial console (bsc#1051510).
• usb: serial: cp210x: add Silicon Labs IDs for Windows Update (bsc#1051510).
• usb: serial: cp210x: add another usb ID for Qivicon ZigBee stick (bsc#1051510).
• usb: serial: ftdi_sio: add RT Systems VX-8 cable (bsc#1051510).
• usb: serial: ftdi_sio: add support for Harman FirmwareHubEmulator (bsc#1051510).
• usb: serial: ftdi_sio: use jtag quirk for Arrow usb Blaster (bsc#1051510).
• usb: serial: keyspan_pda: fix modem-status error handling (bsc#1100132).
• usb: serial: mos7840: fix status-register error handling (bsc#1051510).
• usb: serial: option: Add support for Quectel EP06 (bsc#1051510).
• usb: serial: option: adding support for ublox R410M (bsc#1051510).
• usb: serial: option: reimplement interface masking (bsc#1051510).
• usb: serial: simple: add libtransistor console (bsc#1051510).
• usb: serial: visor: handle potential invalid device configuration (bsc#1051510).
• usb: yurex: fix out-of-bounds uaccess in read handler (bsc#1100132).
• usbip: Correct maximum value of CONFIGusbIPVHCIHCPORTS (bsc#1051510).
• usbip: usbip_event: fix to not print kernel pointer address (bsc#1051510).
• usbip: usbip_host: refine probe and disconnect debug msgs to be useful (bsc#1051510).
• usbip: vhci_hcd: Fix usb device and sockfd leaks (bsc#1051510).
• usbip: vhci_sysfs: fix potential Spectre v1 (bsc#1051510).
• vfio/pci: Fix potential Spectre v1 (bsc#1051510).
• vfio/spapr: Use IOMMU pageshift rather than pagesize (bsc#1077761, git-fixes).
• vhost: synchronize IOTLB message with dev cleanup (networking-stable-180608).
• video/omap: add module license tags (bsc#1090888).
• video: remove unused kconfig SHLCDMIPI_DSI (bsc#1087092).
• virtio-net: Fix operstate for virtio when no VIRTIONETF_STATUS (bsc#1051510).
• virtio-net: correctly transmit XDP buff after linearizing (networking-stable-180608).
• virtio-net: fix leaking page for gso packet during mergeable XDP (networking-stable-180608).
• virtio-net: fix module unloading (bsc#1051510).
• virtionet: Disable interrupts if napicomplete_done rescheduled napi (bsc#1051510).
• virtionet: fix XDP code path in receivesmall() (bsc#1051510).
• vmcore: add API to collect hardware dump in second kernel (bsc#1097585 bsc#1097586 bsc#1097587 bsc#1097588 bsc#1097583 bsc#1097584).
• vrf: check the original netdevice for generating redirect (networking-stable-180608).
• wlcore: add missing nvs file name info for wilink8 (bsc#1051510).
• x.509: unpack RSA signatureValue field from BIT STRING (bsc#1051510).
• x86/efi: Access EFI MMIO data as unencrypted when SEV is active (bsc#1099193).
• xen/grant-table: log the lack of grants (bnc#1085042).
• xhci: Fix kernel oops in tracexhcifreevirtdevice (bsc#1100132).
• xhci: Fix usb3 NULL pointer dereference at logical disconnect (bsc#1090888).
• xhci: Fix use-after-free in xhcifreevirt_device (bsc#1100132).
• xhci: revert 'xhci: plat: Register shutdown for xhci_plat' (bsc#1090888).
• xhci: xhci-mem: off by one in xhcistreamidtoring() (bsc#1100132).